| Message ID | 20220128025513.97188-13-bjorn.andersson@linaro.org |
|---|---|
| State | Accepted |
| Commit | 1172729576fbbe2936f3f9cd03ad9317c6a04eab |
| Headers | show |
| Series | soc: qcom: mdt_loader: Support Qualcomm SM8450 | expand |
On Fri, 28 Jan 2022 at 05:55, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > The Qualcomm SM8450 carries the familiar set of audio, compute, sensor > and modem remoteprocs. Add these and their dependencies. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 297 +++++++++++++++++++++++++++ > 1 file changed, 297 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 10c25ad2d0c7..24fb3d3e667b 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -7,6 +7,7 @@ > #include <dt-bindings/clock/qcom,gcc-sm8450.h> > #include <dt-bindings/clock/qcom,rpmh.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/mailbox/qcom-ipcc.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > > @@ -460,6 +461,15 @@ cvp_mem: memory@9ee00000 { > no-map; > }; > > + rmtfs_mem: memory@9fd00000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0x9fd00000 0x0 0x280000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <15>; > + }; > + > global_sync_mem: memory@a6f00000 { > reg = <0x0 0xa6f00000 0x0 0x100000>; > no-map; > @@ -540,6 +550,113 @@ trusted_apps_ext_mem: memory@ed900000 { > }; > }; > > + smp2p-adsp { > + compatible = "qcom,smp2p"; > + qcom,smem = <443>, <429>; > + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_SMP2P > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_SMP2P>; > + > + qcom,local-pid = <0>; > + qcom,remote-pid = <2>; > + > + smp2p_adsp_out: master-kernel { > + qcom,entry-name = "master-kernel"; > + #qcom,smem-state-cells = <1>; > + }; > + > + smp2p_adsp_in: slave-kernel { > + qcom,entry-name = "slave-kernel"; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + smp2p-cdsp { > + compatible = "qcom,smp2p"; > + qcom,smem = <94>, <432>; > + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP > + IPCC_MPROC_SIGNAL_SMP2P > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_CDSP > + IPCC_MPROC_SIGNAL_SMP2P>; > + > + qcom,local-pid = <0>; > + qcom,remote-pid = <5>; > + > + smp2p_cdsp_out: master-kernel { > + qcom,entry-name = "master-kernel"; > + #qcom,smem-state-cells = <1>; > + }; > + > + smp2p_cdsp_in: slave-kernel { > + qcom,entry-name = "slave-kernel"; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + smp2p-modem { > + compatible = "qcom,smp2p"; > + qcom,smem = <435>, <428>; > + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS > + IPCC_MPROC_SIGNAL_SMP2P > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_MPSS > + IPCC_MPROC_SIGNAL_SMP2P>; > + > + qcom,local-pid = <0>; > + qcom,remote-pid = <1>; > + > + smp2p_modem_out: master-kernel { > + qcom,entry-name = "master-kernel"; > + #qcom,smem-state-cells = <1>; > + }; > + > + smp2p_modem_in: slave-kernel { > + qcom,entry-name = "slave-kernel"; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + ipa_smp2p_out: ipa-ap-to-modem { > + qcom,entry-name = "ipa"; > + #qcom,smem-state-cells = <1>; > + }; > + > + ipa_smp2p_in: ipa-modem-to-ap { > + qcom,entry-name = "ipa"; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + smp2p-slpi { > + compatible = "qcom,smp2p"; > + qcom,smem = <481>, <430>; > + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI > + IPCC_MPROC_SIGNAL_SMP2P > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_SLPI > + IPCC_MPROC_SIGNAL_SMP2P>; > + > + qcom,local-pid = <0>; > + qcom,remote-pid = <3>; > + > + smp2p_slpi_out: master-kernel { > + qcom,entry-name = "master-kernel"; > + #qcom,smem-state-cells = <1>; > + }; > + > + smp2p_slpi_in: slave-kernel { > + qcom,entry-name = "slave-kernel"; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > soc: soc@0 { > #address-cells = <2>; > #size-cells = <2>; > @@ -672,6 +789,167 @@ usb_1_ssphy: phy@88e9200 { > }; > }; > > + remoteproc_slpi: remoteproc@2400000 { > + compatible = "qcom,sm8350-slpi-pas"; I think this should be sm8450-slpi-pas. Otherwise: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > + reg = <0 0x02400000 0 0x4000>; > + > + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, > + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "xo"; > + > + power-domains = <&rpmhpd SM8450_LCX>, > + <&rpmhpd SM8450_LMX>; > + power-domain-names = "lcx", "lmx"; > + > + memory-region = <&slpi_mem>; > + > + qcom,qmp = <&aoss_qmp>; > + > + qcom,smem-states = <&smp2p_slpi_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_SLPI > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "slpi"; > + qcom,remote-pid = <3>; > + }; > + }; > + > + remoteproc_adsp: remoteproc@30000000 { > + compatible = "qcom,sm8450-adsp-pas"; > + reg = <0 0x030000000 0 0x100>; > + > + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, > + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "xo"; > + > + power-domains = <&rpmhpd SM8450_LCX>, > + <&rpmhpd SM8450_LMX>; > + power-domain-names = "lcx", "lmx"; > + > + memory-region = <&adsp_mem>; > + > + qcom,qmp = <&aoss_qmp>; > + > + qcom,smem-states = <&smp2p_adsp_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + remoteproc_adsp_glink: glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "lpass"; > + qcom,remote-pid = <2>; > + }; > + }; > + > + remoteproc_cdsp: remoteproc@32300000 { > + compatible = "qcom,sm8450-cdsp-pas"; > + reg = <0 0x032300000 0 0x1400000>; > + > + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, > + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "xo"; > + > + power-domains = <&rpmhpd SM8450_CX>, > + <&rpmhpd SM8450_MXC>; > + power-domain-names = "cx", "mxc"; > + > + memory-region = <&cdsp_mem>; > + > + qcom,qmp = <&aoss_qmp>; > + > + qcom,smem-states = <&smp2p_cdsp_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_CDSP > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "cdsp"; > + qcom,remote-pid = <5>; > + }; > + }; > + > + remoteproc_mpss: remoteproc@4080000 { > + compatible = "qcom,sm8450-mpss-pas"; > + reg = <0x0 0x04080000 0x0 0x4040>; > + > + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, > + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, > + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", "handover", > + "stop-ack", "shutdown-ack"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "xo"; > + > + power-domains = <&rpmhpd 0>, > + <&rpmhpd 12>; > + power-domain-names = "cx", "mss"; > + > + memory-region = <&mpss_mem>; > + > + qcom,qmp = <&aoss_qmp>; > + > + qcom,smem-states = <&smp2p_modem_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_MPSS > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; > + label = "modem"; > + qcom,remote-pid = <1>; > + }; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sm8450-pdc", "qcom,pdc"; > reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; > @@ -682,6 +960,25 @@ pdc: interrupt-controller@b220000 { > interrupt-controller; > }; > > + aoss_qmp: power-controller@c300000 { > + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; > + reg = <0 0x0c300000 0 0x400>; > + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + #clock-cells = <0>; > + }; > + > + ipcc: mailbox@ed18000 { > + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; > + reg = <0 0x0ed18000 0 0x1000>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <3>; > + #mbox-cells = <2>; > + }; > + > tlmm: pinctrl@f100000 { > compatible = "qcom,sm8450-tlmm"; > reg = <0 0x0f100000 0 0x300000>; > -- > 2.33.1 >
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 10c25ad2d0c7..24fb3d3e667b 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -460,6 +461,15 @@ cvp_mem: memory@9ee00000 { no-map; }; + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + global_sync_mem: memory@a6f00000 { reg = <0x0 0xa6f00000 0x0 0x100000>; no-map; @@ -540,6 +550,113 @@ trusted_apps_ext_mem: memory@ed900000 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -672,6 +789,167 @@ usb_1_ssphy: phy@88e9200 { }; }; + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -682,6 +960,25 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sm8450-tlmm"; reg = <0 0x0f100000 0 0x300000>;
The Qualcomm SM8450 carries the familiar set of audio, compute, sensor and modem remoteprocs. Add these and their dependencies. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 297 +++++++++++++++++++++++++++ 1 file changed, 297 insertions(+)