diff mbox series

[v4,20/27] bus: mhi: ep: Add support for handling MHI_RESET

Message ID 20220228124344.77359-21-manivannan.sadhasivam@linaro.org
State Accepted
Commit 2ee735c1734783ef0dbe604076676820006ff107
Headers show
Series [v4,01/27] bus: mhi: Fix pm_state conversion to string | expand

Commit Message

Manivannan Sadhasivam Feb. 28, 2022, 12:43 p.m. UTC
Add support for handling MHI_RESET in MHI endpoint stack. MHI_RESET will
be issued by the host during shutdown and during error scenario so that
it can recover the endpoint device without restarting the whole device.

MHI_RESET handling involves resetting the internal MHI registers, data
structures, state machines, resetting all channels/rings and setting
MHICTRL.RESET bit to 0. Additionally the device will also move to READY
state if the reset was due to SYS_ERR.

Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/ep/main.c | 53 +++++++++++++++++++++++++++++++++++++++
 include/linux/mhi_ep.h    |  2 ++
 2 files changed, 55 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index 4956440273ad..99cbad2a94c9 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -413,6 +413,7 @@  static irqreturn_t mhi_ep_irq(int irq, void *data)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	enum mhi_state state;
 	u32 int_value;
+	bool mhi_reset;
 
 	/* Acknowledge the ctrl interrupt */
 	int_value = mhi_ep_mmio_read(mhi_cntrl, MHI_CTRL_INT_STATUS);
@@ -421,6 +422,14 @@  static irqreturn_t mhi_ep_irq(int irq, void *data)
 	/* Check for ctrl interrupt */
 	if (FIELD_GET(MHI_CTRL_INT_STATUS_MSK, int_value)) {
 		dev_dbg(dev, "Processing ctrl interrupt\n");
+		mhi_ep_mmio_get_mhi_state(mhi_cntrl, &state, &mhi_reset);
+		if (mhi_reset) {
+			dev_info(dev, "Host triggered MHI reset!\n");
+			disable_irq_nosync(mhi_cntrl->irq);
+			schedule_work(&mhi_cntrl->reset_work);
+			return IRQ_HANDLED;
+		}
+
 		mhi_ep_process_ctrl_interrupt(mhi_cntrl, state);
 	}
 
@@ -496,6 +505,49 @@  static void mhi_ep_abort_transfer(struct mhi_ep_cntrl *mhi_cntrl)
 	mhi_cntrl->enabled = false;
 }
 
+static void mhi_ep_reset_worker(struct work_struct *work)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, reset_work);
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_state cur_state;
+	int ret;
+
+	mhi_ep_abort_transfer(mhi_cntrl);
+
+	spin_lock_bh(&mhi_cntrl->state_lock);
+	/* Reset MMIO to signal host that the MHI_RESET is completed in endpoint */
+	mhi_ep_mmio_reset(mhi_cntrl);
+	cur_state = mhi_cntrl->mhi_state;
+	spin_unlock_bh(&mhi_cntrl->state_lock);
+
+	/*
+	 * Only proceed further if the reset is due to SYS_ERR. The host will
+	 * issue reset during shutdown also and we don't need to do re-init in
+	 * that case.
+	 */
+	if (cur_state == MHI_STATE_SYS_ERR) {
+		mhi_ep_mmio_init(mhi_cntrl);
+
+		/* Set AMSS EE before signaling ready state */
+		mhi_ep_mmio_set_env(mhi_cntrl, MHI_EE_AMSS);
+
+		/* All set, notify the host that we are ready */
+		ret = mhi_ep_set_ready_state(mhi_cntrl);
+		if (ret)
+			return;
+
+		dev_dbg(dev, "READY state notification sent to the host\n");
+
+		ret = mhi_ep_enable(mhi_cntrl);
+		if (ret) {
+			dev_err(dev, "Failed to enable MHI endpoint: %d\n", ret);
+			return;
+		}
+
+		enable_irq(mhi_cntrl->irq);
+	}
+}
+
 int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl)
 {
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -770,6 +822,7 @@  int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
 	}
 
 	INIT_WORK(&mhi_cntrl->state_work, mhi_ep_state_worker);
+	INIT_WORK(&mhi_cntrl->reset_work, mhi_ep_reset_worker);
 
 	mhi_cntrl->wq = alloc_workqueue("mhi_ep_wq", 0, 0);
 	if (!mhi_cntrl->wq) {
diff --git a/include/linux/mhi_ep.h b/include/linux/mhi_ep.h
index 8e062a4c84f4..e77a7b025430 100644
--- a/include/linux/mhi_ep.h
+++ b/include/linux/mhi_ep.h
@@ -76,6 +76,7 @@  struct mhi_ep_db_info {
  * @ch_db_list: List of queued channel doorbells
  * @wq: Dedicated workqueue for handling rings and state changes
  * @state_work: State transition worker
+ * @reset_work: Worker for MHI Endpoint reset
  * @raise_irq: CB function for raising IRQ to the host
  * @alloc_addr: CB function for allocating memory in endpoint for storing host context
  * @map_addr: CB function for mapping host context to endpoint
@@ -124,6 +125,7 @@  struct mhi_ep_cntrl {
 
 	struct workqueue_struct *wq;
 	struct work_struct state_work;
+	struct work_struct reset_work;
 
 	void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector);
 	void __iomem *(*alloc_addr)(struct mhi_ep_cntrl *mhi_cntrl, phys_addr_t *phys_addr,