diff mbox series

[v2,1/3] clk: qcom: clk-hfpll: use poll_timeout macro

Message ID 20220430054458.31321-2-ansuelsmth@gmail.com
State Accepted
Commit fcfbfe373d41b4728ffec075f8f91b6572a88c27
Headers show
Series Small fixes/improvement for hfpll and krait | expand

Commit Message

Christian Marangi April 30, 2022, 5:44 a.m. UTC 
Use regmap_read_poll_timeout macro instead of do-while structure to tidy
things up. Also set a timeout to prevent any sort of system stall.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/clk-hfpll.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
index e847d586a73a..7dd17c184b69 100644
--- a/drivers/clk/qcom/clk-hfpll.c
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -72,13 +72,16 @@  static void __clk_hfpll_enable(struct clk_hw *hw)
 	regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
 
 	/* Wait for PLL to lock. */
-	if (hd->status_reg) {
-		do {
-			regmap_read(regmap, hd->status_reg, &val);
-		} while (!(val & BIT(hd->lock_bit)));
-	} else {
+	if (hd->status_reg)
+		/*
+		 * Busy wait. Should never timeout, we add a timeout to
+		 * prevent any sort of stall.
+		 */
+		regmap_read_poll_timeout(regmap, hd->status_reg, val,
+					 !(val & BIT(hd->lock_bit)), 0,
+					 100 * USEC_PER_MSEC);
+	else
 		udelay(60);
-	}
 
 	/* Enable PLL output. */
 	regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);