diff mbox series

[v2,08/12] phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg

Message ID 20220930112926.638543-9-dmitry.baryshkov@linaro.org
State New
Headers show
Series phy: qcom-qmp: rework register layout tables | expand

Commit Message

Dmitry Baryshkov Sept. 30, 2022, 11:29 a.m. UTC
The QPHY_PCS_MISC_TYPEC_CTRL register is not used, remove it from
register layout.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 3 ---
 1 file changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 9d112aa34ba3..0b5015c7bd19 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -109,8 +109,6 @@  enum qphy_reg_layout {
 	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
 	QPHY_PCS_POWER_DOWN_CONTROL,
-	/* PCS_MISC registers */
-	QPHY_PCS_MISC_TYPEC_CTRL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };
@@ -151,7 +149,6 @@  static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0xd8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
 	[QPHY_PCS_STATUS]		= 0x174,
-	[QPHY_PCS_MISC_TYPEC_CTRL]	= 0x00,
 };
 
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {