From patchwork Thu Oct 13 21:06:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 614801 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 141A5C433FE for ; Thu, 13 Oct 2022 21:10:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229764AbiJMVKS (ORCPT ); Thu, 13 Oct 2022 17:10:18 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43022 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229992AbiJMVKP (ORCPT ); Thu, 13 Oct 2022 17:10:15 -0400 Received: from mail-qt1-x835.google.com (mail-qt1-x835.google.com [IPv6:2607:f8b0:4864:20::835]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 131A852DD5 for ; Thu, 13 Oct 2022 14:10:02 -0700 (PDT) Received: by mail-qt1-x835.google.com with SMTP id h15so2566133qtu.2 for ; Thu, 13 Oct 2022 14:10:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Je5a1wK2JQNf0o2FF1axgeUdjAZGODcqwdWsXakiUXE=; b=s7WCRXdQswvgUpSG6M60bLH+0oiorE/Vb6Y4qXe/dnJnWdzr0CXF80h3ho4WItYMKD s7GcTr45EXEXGSvJu6lVC5jPfMUBxuxa1dr6tvDqmU6Z9EVDW5LeCLZ5sTuertRSqOcO 9yRRj7Ypf4X7rM2YfJZHwFRfyptRtPL4SEr2ExWFaaFYgGP2n4FskerxOZgZkIyOPB/w vWsBaNx1D8FA62DId7mizzqwqFNf9dK/eHUmapFJJVKODDOFeZhFfOLAbLhdob4BYh2h AC7C/DJsJBmAKcFQKUqlGBG9yuSQuO8SKnx9VC/RBGg+cZTXfwrDszImfRdooAjVKdNy 3log== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Je5a1wK2JQNf0o2FF1axgeUdjAZGODcqwdWsXakiUXE=; b=f1T4TzV6RmWliUBfPEm8QOXCeC0ei0TfYIZStM0MKtkkJ0lBkuKOrpf1RVtKQjqyy+ iIkCIRVwI+5eLEzsI88mi6Mh1ylxSKg624svYkEtJ4KASzvjkZl1a+zwZT2+Wv+l/kc5 42q4W3LQVxBEUt1XwbiNaTBL4cDQu8la6bdVUAjcMgR72dW4oks5YBRNlBvVRp5sf4c4 JdCcKhcAoG9eXMHSeovq9Z1d9S/VZK13i34M90x8Y9jA4i2CkGiakWzwRDoamyDhzg8P aGjXFLvs2WKtalkgru6I3QNnhA7l2UX3XBzDq/YdtF8UgiK9FSKhX8GIwsaeU58x+QNr KPAQ== X-Gm-Message-State: ACrzQf1C21TLkXqOz23RUvjrZUPefVzCHM7sOHTVpWqHlQKgllnkDul+ v3xXVQpqyYA4d89Z/Y9fN5mlCA== X-Google-Smtp-Source: AMsMyM7jiP51TJWmjZh5Sz/0PCuWt0m84f0/I5p5XlZzodHJPYAwMiNqFX/zUEhdsI4JgpIsidmTnw== X-Received: by 2002:a05:622a:1015:b0:39c:be69:bf2d with SMTP id d21-20020a05622a101500b0039cbe69bf2dmr1677181qte.85.1665695401790; Thu, 13 Oct 2022 14:10:01 -0700 (PDT) Received: from krzk-bin.home (cpe-72-225-192-120.nyc.res.rr.com. [72.225.192.120]) by smtp.gmail.com with ESMTPSA id s1-20020a05620a29c100b006eeb3165554sm753071qkp.19.2022.10.13.14.09.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 13 Oct 2022 14:09:54 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH v3 3/4] arm64: dts: qcom: msm8998: align TLMM pin configuration with DT schema Date: Thu, 13 Oct 2022 17:06:11 -0400 Message-Id: <20221013210612.95994-3-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221013210612.95994-1-krzysztof.kozlowski@linaro.org> References: <20221013210612.95994-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio --- Changes since v2: 1. None --- .../boot/dts/qcom/msm8998-clamshell.dtsi | 7 +- .../boot/dts/qcom/msm8998-fxtec-pro1.dts | 16 ++-- arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 4 +- .../dts/qcom/msm8998-oneplus-cheeseburger.dts | 10 +-- .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 14 ++-- .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 30 ++++---- arch/arm64/boot/dts/qcom/msm8998.dtsi | 76 +++++++++---------- 7 files changed, 78 insertions(+), 79 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 7928b8197474..16685fadd3e1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -35,7 +35,7 @@ bluetooth { }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -46,7 +46,7 @@ rx { bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -357,8 +357,9 @@ &sdhc2 { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - touchpad: touchpad-pin { + touchpad: touchpad-pin-state { pins = "gpio123"; + function = "gpio"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 429ba57e20f7..5fc0564664cf 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -216,7 +216,7 @@ bluetooth { }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -227,7 +227,7 @@ rx { bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -615,14 +615,14 @@ &remoteproc_slpi { &tlmm { gpio-reserved-ranges = <0 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; bias-pull-down; drive-strength = <2>; }; - gpio_kb_pins_extra: gpio-kb-pins-extra { + gpio_kb_pins_extra: gpio-kb-pins-extra-state { pins = "gpio21", "gpio32", "gpio33", "gpio114", "gpio128", "gpio129"; function = "gpio"; @@ -630,21 +630,21 @@ gpio_kb_pins_extra: gpio-kb-pins-extra { bias-pull-up; }; - ts_vio_default: ts-vio-def { + ts_vio_default: ts-vio-def-state { pins = "gpio81"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_rst_n: ts-rst-n { + ts_rst_n: ts-rst-n-state { pins = "gpio89"; function = "gpio"; bias-pull-up; drive-strength = <8>; }; - hall_sensor1_default: hall-sensor1-def { + hall_sensor1_default: hall-sensor1-def-state { pins = "gpio124"; function = "gpio"; bias-disable; @@ -652,7 +652,7 @@ hall_sensor1_default: hall-sensor1-def { input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index a3ca58100aee..61f5a827a8d7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -46,7 +46,7 @@ bluetooth { }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -57,7 +57,7 @@ rx { bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 122f6c25220e..b951f98d1b7b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -33,11 +33,9 @@ button-backlight { &pmi8998_gpio { button_backlight_default: button-backlight-state { - pinconf { - pins = "gpio5"; - function = "gpio"; - bias-pull-down; - qcom,drive-strength = ; - }; + pins = "gpio5"; + function = "gpio"; + bias-pull-down; + qcom,drive-strength = ; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 62bda23791bb..748de88d5d57 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -233,7 +233,7 @@ bluetooth { }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 46 (RX). This is needed to @@ -244,7 +244,7 @@ rx { bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -492,7 +492,7 @@ vreg_bob: bob { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - hall_sensor_default: hall-sensor-default { + hall_sensor_default: hall-sensor-default-state { pins = "gpio124"; function = "gpio"; drive-strength = <2>; @@ -500,28 +500,28 @@ hall_sensor_default: hall-sensor-default { input-enable; }; - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio89"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - nfc_int_active: nfc-int-active { + nfc_int_active: nfc-int-active-state { pins = "gpio92"; function = "gpio"; drive-strength = <6>; bias-pull-up; }; - nfc_enable_active: nfc-enable-active { + nfc_enable_active: nfc-enable-active-state { pins = "gpio12", "gpio116"; function = "gpio"; drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d08639082247..440f2b2d2b2e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -565,14 +565,14 @@ &sdhc2 { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; bias-pull-down; }; - nfc_ven: nfc-ven { + nfc_ven: nfc-ven-state { pins = "gpio12"; function = "gpio"; bias-disable; @@ -580,42 +580,42 @@ nfc_ven: nfc-ven { output-low; }; - msm_mclk0_default: msm-mclk0-active { + msm_mclk0_default: msm-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active { + msm_mclk1_default: msm-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio18", "gpio19"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default { + cam0_vdig_default: cam0-vdig-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int { + tof_int: tof-int-state { pins = "gpio22"; function = "gpio"; bias-pull-up; @@ -623,28 +623,28 @@ tof_int: tof-int { input-enable; }; - cam1_vdig_default: cam1-vdig-default { + cam1_vdig_default: cam1-vdig-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active { + usb_extcon_active: usb-extcon-active-state { pins = "gpio38"; function = "gpio"; bias-disable; drive-strength = <16>; }; - tof_reset: tof-reset { + tof_reset: tof-reset-state { pins = "gpio27"; function = "gpio"; bias-disable; drive-strength = <2>; }; - hall_sensor0_default: acc-cover-open { + hall_sensor0_default: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; @@ -652,14 +652,14 @@ hall_sensor0_default: acc-cover-open { input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - usb_vbus_active: usb-vbus-active { + usb_vbus_active: usb-vbus-active-state { pins = "gpio128"; function = "gpio"; bias-disable; @@ -667,7 +667,7 @@ usb_vbus_active: usb-vbus-active { output-low; }; - ts_vddio_en: ts-vddio-en-default { + ts_vddio_en: ts-vddio-en-default-state { pins = "gpio133"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 2c4acf227253..9650670eae05 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1062,76 +1062,76 @@ tlmm: pinctrl@3400000 { interrupt-controller; #interrupt-cells = <2>; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_off: sdc2-off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; - sdc2_cd: sdc2-cd { + sdc2_cd: sdc2-cd-state { pins = "gpio95"; function = "gpio"; bias-pull-up; drive-strength = <2>; }; - blsp1_uart3_on: blsp1-uart3-on { - tx { + blsp1_uart3_on: blsp1-uart3-on-state { + tx-pins { pins = "gpio45"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rx { + rx-pins { pins = "gpio46"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - cts { + cts-pins { pins = "gpio47"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rfr { + rfr-pins { pins = "gpio48"; function = "blsp_uart3_a"; drive-strength = <2>; @@ -1139,168 +1139,168 @@ rfr { }; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - blsp1_i2c1_sleep: blsp1-i2c1-sleep { + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c2_default: blsp1-i2c2-default { + blsp1_i2c2_default: blsp1-i2c2-default-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - blsp1_i2c2_sleep: blsp1-i2c2-sleep { + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c3-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c4_default: blsp1-i2c4-default { + blsp1_i2c4_default: blsp1-i2c4-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - blsp1_i2c4_sleep: blsp1-i2c4-sleep { + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c5_default: blsp1-i2c5-default { + blsp1_i2c5_default: blsp1-i2c5-default-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - blsp1_i2c5_sleep: blsp1-i2c5-sleep { + blsp1_i2c5_sleep: blsp1-i2c5-sleep-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c6_default: blsp1-i2c6-default { + blsp1_i2c6_default: blsp1-i2c6-default-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - blsp1_i2c6_sleep: blsp1-i2c6-sleep { + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ - blsp2_i2c1_default: blsp2-i2c1-default { + blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - blsp2_i2c1_sleep: blsp2-i2c1-sleep { + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c2_default: blsp2-i2c2-default { + blsp2_i2c2_default: blsp2-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c3_default: blsp2-i2c3-default { + blsp2_i2c3_default: blsp2-i2c3-default-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-disable; }; - blsp2_i2c3_sleep: blsp2-i2c3-sleep { + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c4_default: blsp2-i2c4-default { + blsp2_i2c4_default: blsp2-i2c4-default-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-disable; }; - blsp2_i2c4_sleep: blsp2-i2c4-sleep { + blsp2_i2c4_sleep: blsp2-i2c4-sleep-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c5_default: blsp2-i2c5-default { + blsp2_i2c5_default: blsp2-i2c5-default-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_sleep: blsp2-i2c5-sleep { + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c6_default: blsp2-i2c6-default { + blsp2_i2c6_default: blsp2-i2c6-default-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>;