diff mbox series

[v2,2/3] arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties to dts

Message ID 20221214203124.564537-3-bhupesh.sharma@linaro.org
State Superseded
Headers show
Series arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups | expand

Commit Message

Bhupesh Sharma Dec. 14, 2022, 8:31 p.m. UTC
Normally the 'maximum-speed' and 'dr_mode' properties
of a USB controller + port is dependent on the type of
the ports, regulators and mode change interrupt routing
available on the board(s).

So, move the same from the sm6115 dtsi file to respective
board file(s).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 5 +++++
 arch/arm64/boot/dts/qcom/sm6115.dtsi                | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index fa57f4bf58256..3f39f25e0721e 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -229,6 +229,11 @@  &usb {
 	status = "okay";
 };
 
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+};
+
 &usb_hsphy {
 	vdd-supply = <&vreg_l4a>;
 	vdda-pll-supply = <&vreg_l12a>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index b5f7480c2e713..e4ce135264f3d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1031,8 +1031,6 @@  usb_dwc3: usb@4e00000 {
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
-				maximum-speed = "high-speed";
-				dr_mode = "peripheral";
 			};
 		};