diff mbox series

[6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states

Message ID 20221214232049.703484-7-marijn.suijten@somainline.org
State Superseded
Headers show
Series arm64: dts: qcom: msm8956-loire: SDCard | expand

Commit Message

Marijn Suijten Dec. 14, 2022, 11:20 p.m. UTC
In addition to the SDC2 pins, set the SD Card Detect pin in a sane state
to be used as an interrupt when an SD Card is slotted in or removed.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8956-sony-xperia-loire.dtsi     | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
index 2253fb05f1c9..a91b0af3e8c6 100644
--- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -264,10 +264,27 @@  &sdhc_1 {
 	status = "okay";
 };
 
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
 &sdc2_on_state {
 	clk-pins {
 		drive-strength = <10>;
 	};
+
+	sd-cd-pins {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		input-enable;
+		bias-pull-up;
+	};
 };
 
 &sdhc_2 {