diff mbox series

[V3,01/10] dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema

Message ID 20230111114337.24782-2-quic_sibis@quicinc.com
State Superseded
Headers show
Series Fix XPU violation during modem metadata authentication | expand

Commit Message

Sibi Sankar Jan. 11, 2023, 11:43 a.m. UTC
Convert MSM8996 and similar (MSM8998/SDM845) MSS PIL bindings to schema.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---

v3:
 * yaml description rewrite [Krzysztof]
 * fix compatible property [Krzysztof]
 * add blank lines and additionalProperties: false to
   mba/mpss objects
 * Pick R-b

 .../remoteproc/qcom,msm8996-mss-pil.yaml      | 377 ++++++++++++++++++
 .../bindings/remoteproc/qcom,q6v5.txt         | 137 +------
 2 files changed, 382 insertions(+), 132 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
new file mode 100644
index 000000000000..1aa5e5c7c2bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -0,0 +1,377 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,msm8996-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 MSS Peripheral Image Loader (and similar)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  MSS Peripheral Image Loader loads and boots firmware on the
+  Qualcomm Technology Inc. MSM8996 Modem Hexagon Core (and similar).
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-mss-pil
+      - qcom,msm8998-mss-pil
+      - qcom,sdm845-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    maxItems: 9
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain (only valid for qcom,sdm845-mss-pil)
+    minItems: 2
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss # only valid for qcom,sdm845-mss-pil
+    minItems: 2
+
+  pll-supply:
+    description: PLL supply
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset (only valid for qcom,sdm845-mss-pil)
+    minItems: 1
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset # only valid for qcom,sdm845-mss-pil
+    minItems: 1
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop modem
+
+  qcom,smem-state-names:
+    description: Names of the states used by the AP to signal the Hexagon core
+    items:
+      - const: stop
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: Modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the Modem.
+    unevaluatedProperties: false
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+    unevaluatedProperties: false
+
+  # Deprecated properties
+  mba:
+    type: object
+    description:
+      MBA reserved region
+
+    properties:
+      memory-region: true
+
+    required:
+      - memory-region
+
+    additionalProperties: false
+    deprecated: true
+
+  mpss:
+    type: object
+    description:
+      MPSS reserved region
+
+    properties:
+      memory-region: true
+
+    required:
+      - memory-region
+
+    additionalProperties: false
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-mss-pil
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: RPMH XO clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: RPMH PNOC clock
+            - description: GCC MSS PRNG clock
+            - description: RPMH QDSS clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: xo
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: pnoc
+            - const: qdss
+        glink-edge: false
+      required:
+        - pll-supply
+        - smd-edge
+    else:
+      properties:
+        pll-supply: false
+        smd-edge: false
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8998-mss-pil
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: RPMH QDSS clock
+            - description: RPMH XO clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: qdss
+            - const: xo
+      required:
+        - glink-edge
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sdm845-mss-pil
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: GCC MSS PRNG clock
+            - description: RPMH XO clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: prng
+            - const: xo
+      required:
+        - qcom,qmp
+        - glink-edge
+    else:
+      properties:
+        iommus: false
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+        qcom,qmp: false
+
+  # Fallbacks for deprecated properties
+  - oneOf:
+      - required:
+          - memory-region
+      - required:
+          - mba
+          - mpss
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc@4080000 {
+        compatible = "qcom,sdm845-mss-pil";
+        reg = <0x04080000 0x408>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack",
+                          "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&gcc GCC_PRNG_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "mem", "gpll0_mss",
+                      "snoc_axi", "mnoc_axi", "prng", "xo";
+
+        power-domains = <&rpmhpd SDM845_CX>,
+                        <&rpmhpd SDM845_MX>,
+                        <&rpmhpd SDM845_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+            mboxes = <&apss_shared 12>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 5923c0447e2d..573a88b60677 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,9 +9,6 @@  on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,ipq8074-wcss-pil"
 		    "qcom,qcs404-wcss-pil"
-		    "qcom,msm8996-mss-pil"
-		    "qcom,msm8998-mss-pil"
-		    "qcom,sdm845-mss-pil"
 
 - reg:
 	Usage: required
@@ -32,23 +29,7 @@  on the Qualcomm Hexagon core.
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: The interrupts needed depends on the compatible
-		    string:
-	qcom,ipq8074-wcss-pil:
-	qcom,qcs404-wcss-pil:
-		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
-	qcom,msm8996-mss-pil:
-	qcom,msm8998-mss-pil:
-	qcom,sdm845-mss-pil:
-		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
-		    "shutdown-ack"
-
-- firmware-name:
-	Usage: optional
-	Value type: <stringlist>
-	Definition: must list the relative firmware image paths for mba and
-		    modem. They are used for booting and authenticating the
-		    Hexagon core.
+	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
 
 - clocks:
 	Usage: required
@@ -66,41 +47,23 @@  on the Qualcomm Hexagon core.
 		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
 		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
 		    "lcc_axim_cbc", "lcc_bcr_sleep"
-	qcom,msm8996-mss-pil:
-		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
-		    "snoc_axi", "mnoc_axi", "pnoc", "qdss"
-	qcom,msm8998-mss-pil:
-		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
-		    "snoc_axi", "mnoc_axi", "qdss"
-	qcom,sdm845-mss-pil:
-		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
-		    "snoc_axi", "mnoc_axi", "prng"
 
 - resets:
 	Usage: required
 	Value type: <phandle>
-	Definition: reference to the reset-controller for the modem sub-system
-		    reference to the list of 3 reset-controllers for the
+	Definition: reference to the list of 3 reset-controllers for the
 		    wcss sub-system
-		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SDM845 SoCs
 
 - reset-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "mss_restart" for the modem sub-system
-		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
+	Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
-		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SDM845 SoCs
 
-For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
-should be referenced as follows:
 - memory-region:
 	Usage: required
 	Value type: <phandle>
-	Definition: reference to the reserved-memory for the mba region followed
-		    by the mpss region
+	Definition: reference to wcss reserved-memory region.
 
 For the compatible string below the following supplies are required:
   "qcom,qcs404-wcss-pil"
@@ -110,36 +73,6 @@  For the compatible string below the following supplies are required:
 	Definition: reference to the regulators to be held on behalf of the
 		    booting of the Hexagon core
 
-For the compatible string below the following supplies are required:
-  "qcom,msm8996-mss-pil"
-- pll-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulators to be held on behalf of the
-		    booting of the Hexagon core
-
-- power-domains:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to power-domains that match power-domain-names
-
-- power-domain-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The power-domains needed depend on the compatible string:
-	qcom,ipq8074-wcss-pil:
-		    no power-domain names required
-	qcom,msm8996-mss-pil:
-	qcom,msm8998-mss-pil:
-		    must be "cx", "mx"
-	qcom,sdm845-mss-pil:
-		    must be "cx", "mx", "mss"
-
-- qcom,qmp:
-	Usage: optional
-	Value type: <phandle>
-	Definition: reference to the AOSS side-channel message RAM.
-
 - qcom,smem-states:
 	Usage: required
 	Value type: <phandle>
@@ -155,16 +88,9 @@  For the compatible string below the following supplies are required:
 	Usage: required
 	Value type: <prop-encoded-array>
 	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the three offsets within syscon for q6, modem and nc
+		    by the three offsets within syscon for q6, wcss and nc
 		    halt registers.
 
-The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
-on platforms which do not have TrustZone.
-
-= SUBNODES:
-The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
-the memory regions used by the Hexagon firmware. Each sub-node must contain:
-
 - memory-region:
 	Usage: required
 	Value type: <phandle>
@@ -174,56 +100,3 @@  The Hexagon node may also have an subnode named either "smd-edge" or
 "glink-edge" that describes the communication edge, channels and devices
 related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-Hexagon, as it is found on MSM8974 boards.
-
-	remoteproc@fc880000 {
-		compatible = "qcom,msm8974-mss-pil";
-		reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
-		reg-names = "qdsp6", "rmb";
-
-		interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-				      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-		clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-			 <&gcc GCC_MSS_CFG_AHB_CLK>,
-			 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-			 <&xo_board>;
-		clock-names = "iface", "bus", "mem", "xo";
-
-		resets = <&gcc GCC_MSS_RESTART>;
-		reset-names = "mss_restart";
-
-		cx-supply = <&pm8841_s2>;
-		mss-supply = <&pm8841_s3>;
-		mx-supply = <&pm8841_s1>;
-		pll-supply = <&pm8941_l12>;
-
-		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
-		qcom,smem-states = <&modem_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		mba {
-			memory-region = <&mba_region>;
-		};
-
-		mpss {
-			memory-region = <&mpss_region>;
-		};
-
-		smd-edge {
-			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 12>;
-			qcom,smd-edge = <0>;
-
-			label = "modem";
-		};
-	};