@@ -39,6 +39,7 @@ CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x0>;
+ clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
@@ -54,6 +55,7 @@ CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x1>;
+ clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
@@ -65,6 +67,7 @@ CPU2: cpu@2 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x2>;
+ clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
@@ -76,6 +79,7 @@ CPU3: cpu@3 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x3>;
+ clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
@@ -87,6 +91,7 @@ CPU4: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x100>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
@@ -102,6 +107,7 @@ CPU5: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x101>;
+ clocks = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
@@ -113,6 +119,7 @@ CPU6: cpu@102 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x102>;
+ clocks = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
@@ -124,6 +131,7 @@ CPU7: cpu@103 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x103>;
+ clocks = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
@@ -2123,6 +2131,7 @@ cpufreq_hw: cpufreq@f521000 {
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
+ #clock-cells = <1>;
};
};
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks to the CPU cores. But this relationship is not represented in DTS so far. So let's make cpufreq node as the clock provider and CPU nodes as the consumers. The clock index for each CPU node is based on the frequency domain index. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)