diff mbox series

[v3,1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states

Message ID 20230505075354.1634547-2-bhupesh.sharma@linaro.org
State Superseded
Headers show
Series arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals | expand

Commit Message

Bhupesh Sharma May 5, 2023, 7:53 a.m. UTC 
Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..504543ad1a1b 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -190,6 +190,10 @@  vreg_l24a_2p96: l24 {
 };
 
 &sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
 	vmmc-supply = <&vreg_l24a_2p96>;
 	vqmmc-supply = <&vreg_l11a_1p8>;
 	no-sdio;
@@ -200,6 +204,11 @@  &sdhc_1 {
 
 &sdhc_2 {
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
 	vmmc-supply = <&vreg_l22a_2p96>;
 	vqmmc-supply = <&vreg_l5a_2p96>;
 	no-sdio;
@@ -216,6 +225,13 @@  &tlmm {
 			       <49 1>, <52 1>, <54 1>,
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart4 {