diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4f9e81253e18..22876ea2e409 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -166,6 +166,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-headless.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-db845c-common.dtsi
new file mode 100644
index 000000000000..ecc4a851e29c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-common.dtsi
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Thundercomm Dragonboard 845c";
+	compatible = "thundercomm,db845c", "qcom,sdm845";
+	qcom,msm-id = <341 0x20001>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal oscillator dedicated to MCP2517FD */
+	clk40M: can-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "green:user4";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic-indicator";
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	lt9611_1v8: lt9611-vdd18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V8";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lt9611_3v3: lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	pcie0_1p05v: pcie-0-1p05v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE0_1.05V";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_DVDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	cam0_avdd_2v8: cam0-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
+	cam3_avdd_2v8: cam3-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM3_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vbat>;
+	};
+
+	pcie0_3p3v_dual: vldo-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie0_pwren_state>;
+	};
+
+	v5p0_hdmiout: v5p0-hdmiout-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "V5P0_HDMIOUT";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		vin-supply = <&vbat_som>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+
+	firmware-name = "qcom/sdm845/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mbn";
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&dsi1 {
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi1_phy {
+	vdds-supply = <&vreg_l1a_0p875>;
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c11 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pm8998_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"WLAN_SW_CTRL",
+		"NC",
+		"PM_GPIO5_BLUE_BT_LED",
+		"VOL_UP_N",
+		"NC",
+		"ADC_IN1",
+		"PM_GPIO9_YEL_WIFI_LED",
+		"CAM0_AVDD_EN",
+		"NC",
+		"CAM0_DVDD_EN",
+		"PM_GPIO13_GREEN_U4_LED",
+		"DIV_CLK2",
+		"NC",
+		"NC",
+		"NC",
+		"SMB_STAT",
+		"NC",
+		"NC",
+		"ADC_IN2",
+		"OPTION1",
+		"WCSS_PWR_REQ",
+		"PM845_GPIO24",
+		"OPTION2",
+		"PM845_SLB";
+
+	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
+		pins = "gpio12";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
+		pins = "gpio10";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+	};
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+	};
+};
+
+&pmi8998_rradc {
+	status = "okay";
+};
+
+/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+		direction = <2>;
+		is-compress-dai;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			 &quat_mi2s_sd0_active
+			 &quat_mi2s_sd1_active
+			 &quat_mi2s_sd2_active
+			 &quat_mi2s_sd3_active>;
+	pinctrl-names = "default";
+	model = "DB845c";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"DMIC0", "MIC BIAS1",
+		"DMIC1", "MIC BIAS1",
+		"DMIC2", "MIC BIAS3",
+		"DMIC3", "MIC BIAS3",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MM_DL4",  "MultiMedia4 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&lt9611_codec 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_spi0_default>;
+	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+	can@0 {
+		compatible = "microchip,mcp2517fd";
+		reg = <0>;
+		clocks = <&clk40M>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&tlmm {
+	cam0_default: cam0-default-state {
+		rst-pins {
+			pins = "gpio9";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk0-pins {
+			pins = "gpio13";
+			function = "cam_mclk";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	cam3_default: cam3-default-state {
+		rst-pins {
+			function = "gpio";
+			pins = "gpio21";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk3-pins {
+			function = "cam_mclk";
+			pins = "gpio16";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	dsi_sw_sel: dsi-sw-sel-state {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio36";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio35";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pwren_state: pcie0-pwren-state {
+		pins = "gpio90";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-n-pins {
+			pins = "gpio102";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		clkreq-pins {
+			pins = "gpio103";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio11";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio75";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+
+			/*
+			 * It seems that mmc_test reports errors if drive
+			 * strength is not 16 on clk, cmd, and data pins.
+			 */
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart3 {
+	label = "LS-UART0";
+	pinctrl-0 = <&qup_uart3_4pin>;
+
+	status = "disabled";
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,1 {
+			compatible = "sdw10217201000";
+			reg = <0 1>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,2 {
+			compatible = "sdw10217201000";
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			reg = <0 2>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi2_default {
+	drive-strength = <16>;
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi0_default {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-headless.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-headless.dts
new file mode 100644
index 000000000000..22cf637b2fcb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-headless.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-db845c-common.dtsi"
+
+&mdss {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index ecc4a851e29c..2a9fe0119176 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -5,1174 +5,14 @@
 
 /dts-v1/;
 
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
-#include "sdm845-wcd9340.dtsi"
-#include "pm8998.dtsi"
-#include "pmi8998.dtsi"
+#include "sdm845-db845c-common.dtsi"
 
 / {
-	model = "Thundercomm Dragonboard 845c";
-	compatible = "thundercomm,db845c", "qcom,sdm845";
-	qcom,msm-id = <341 0x20001>;
-	qcom,board-id = <8 0>;
-
-	aliases {
-		serial0 = &uart9;
-		serial1 = &uart6;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Fixed crystal oscillator dedicated to MCP2517FD */
-	clk40M: can-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <40000000>;
-	};
-
-	dc12v: dc12v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "DC12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vol_up_pin_a>;
-
-		key-vol-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "green:user4";
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
-			default-state = "off";
-		};
-
-		led-1 {
-			label = "yellow:wlan";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led-2 {
-			label = "blue:bt";
-			function = LED_FUNCTION_BLUETOOTH;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&lt9611_out>;
-			};
+	reserved-memory {
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
 		};
 	};
-
-	lt9611_1v8: lt9611-vdd18-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "LT9611_1V8";
-
-		vin-supply = <&vdc_5v>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lt9611_3v3: lt9611-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "LT9611_3V3";
-
-		vin-supply = <&vdc_3v3>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	pcie0_1p05v: pcie-0-1p05v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "PCIE0_1.05V";
-
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <1050000>;
-		regulator-max-microvolt = <1050000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM0_DVDD_1V2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		enable-active-high;
-		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
-		vin-supply = <&vbat>;
-	};
-
-	cam0_avdd_2v8: cam0-avdd-2v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM0_AVDD_2V8";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		enable-active-high;
-		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
-		vin-supply = <&vbat>;
-	};
-
-	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
-	cam3_avdd_2v8: cam3-avdd-2v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM3_AVDD_2V8";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-		vin-supply = <&vbat>;
-	};
-
-	pcie0_3p3v_dual: vldo-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VLDO_3V3";
-
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie0_pwren_state>;
-	};
-
-	v5p0_hdmiout: v5p0-hdmiout-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "V5P0_HDMIOUT";
-
-		vin-supply = <&vdc_5v>;
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <500000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	vbat: vbat-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-	};
-
-	vbat_som: vbat-som-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT_SOM";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-	};
-
-	vdc_3v3: vdc-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDC_3V3";
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdc_5v: vdc-5v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDC_5V";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <500000>;
-		regulator-always-on;
-	};
-
-	vreg_s4a_1p8: vreg-s4a-1p8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s4a_1p8";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-
-		vin-supply = <&vbat_som>;
-	};
-};
-
-&adsp_pas {
-	status = "okay";
-
-	firmware-name = "qcom/sdm845/adsp.mbn";
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-		vdd-s11-supply = <&vph_pwr>;
-		vdd-s12-supply = <&vph_pwr>;
-		vdd-s13-supply = <&vph_pwr>;
-		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
-		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
-		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
-		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
-		vdd-l6-supply = <&vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
-		vdd-l9-supply = <&vreg_bob>;
-		vdd-l10-l23-l25-supply = <&vreg_bob>;
-		vdd-l13-l19-l21-supply = <&vreg_bob>;
-		vdd-l16-l28-supply = <&vreg_bob>;
-		vdd-l18-l22-supply = <&vreg_bob>;
-		vdd-l20-l24-supply = <&vreg_bob>;
-		vdd-l26-supply = <&vreg_s3a_1p35>;
-		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vreg_s3a_1p35: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_s5a_2p04: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		vreg_s7a_1p025: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vreg_l1a_0p875: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5a_0p8: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a_1p8: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13a_2p95: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17a_1p3: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l20a_2p95: ldo20 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l21a_2p95: ldo21 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l24a_3p075: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l25a_3p3: ldo25 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l26a_1p2: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmi8998-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob-supply = <&vph_pwr>;
-
-		vreg_bob: bob {
-			regulator-min-microvolt = <3312000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-			regulator-allow-bypass;
-		};
-	};
-};
-
-&cdsp_pas {
-	status = "okay";
-	firmware-name = "qcom/sdm845/cdsp.mbn";
-};
-
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-	qcom,master-dsi;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l1a_0p875>;
-};
-
-&dsi1 {
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-
-	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-
-	status = "okay";
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi1_phy {
-	vdds-supply = <&vreg_l1a_0p875>;
-	status = "okay";
-};
-
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			   <GCC_LPASS_Q6_AXI_CLK>,
-			   <GCC_LPASS_SWAY_CLK>;
-};
-
-&gmu {
-	status = "okay";
-};
-
-&gpi_dma0 {
-	status = "okay";
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/a630_zap.mbn";
-	};
-};
-
-&i2c10 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	lt9611_codec: hdmi-bridge@3b {
-		compatible = "lontium,lt9611";
-		reg = <0x3b>;
-		#sound-dai-cells = <1>;
-
-		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
-
-		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
-
-		vdd-supply = <&lt9611_1v8>;
-		vcc-supply = <&lt9611_3v3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lt9611_b: endpoint {
-					remote-endpoint = <&dsi1_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				lt9611_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&i2c11 {
-	/* On Low speed expansion */
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c14 {
-	/* On Low speed expansion */
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mss_pil {
-	status = "okay";
-	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
-
-	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_default_state>;
-};
-
-&pcie0_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_state>;
-};
-
-&pcie1_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pm8998_gpios {
-	gpio-line-names =
-		"NC",
-		"NC",
-		"WLAN_SW_CTRL",
-		"NC",
-		"PM_GPIO5_BLUE_BT_LED",
-		"VOL_UP_N",
-		"NC",
-		"ADC_IN1",
-		"PM_GPIO9_YEL_WIFI_LED",
-		"CAM0_AVDD_EN",
-		"NC",
-		"CAM0_DVDD_EN",
-		"PM_GPIO13_GREEN_U4_LED",
-		"DIV_CLK2",
-		"NC",
-		"NC",
-		"NC",
-		"SMB_STAT",
-		"NC",
-		"NC",
-		"ADC_IN2",
-		"OPTION1",
-		"WCSS_PWR_REQ",
-		"PM845_GPIO24",
-		"OPTION2",
-		"PM845_SLB";
-
-	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
-		pins = "gpio12";
-		function = "normal";
-
-		bias-pull-up;
-		drive-push-pull;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
-		pins = "gpio10";
-		function = "normal";
-
-		bias-pull-up;
-		drive-push-pull;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	vol_up_pin_a: vol-up-active-state {
-		pins = "gpio6";
-		function = "normal";
-		input-enable;
-		bias-pull-up;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-	};
-};
-
-&pm8998_resin {
-	linux,code = <KEY_VOLUMEDOWN>;
-	status = "okay";
-};
-
-&pmi8998_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	led@3 {
-		reg = <3>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <3>;
-
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-
-	led@4 {
-		reg = <4>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <2>;
-	};
-
-	led@5 {
-		reg = <5>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <1>;
-	};
-};
-
-&pmi8998_rradc {
-	status = "okay";
-};
-
-/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
-&q6afedai {
-	dai@22 {
-		reg = <QUATERNARY_MI2S_RX>;
-		qcom,sd-lines = <0 1 2 3>;
-	};
-};
-
-&q6asmdai {
-	dai@0 {
-		reg = <0>;
-	};
-
-	dai@1 {
-		reg = <1>;
-	};
-
-	dai@2 {
-		reg = <2>;
-	};
-
-	dai@3 {
-		reg = <3>;
-		direction = <2>;
-		is-compress-dai;
-	};
-};
-
-&qupv3_id_0 {
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
-
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vreg_l13a_2p95>;
-
-	bus-width = <4>;
-	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
-	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
-	pinctrl-0 = <&quat_mi2s_active
-			 &quat_mi2s_sd0_active
-			 &quat_mi2s_sd1_active
-			 &quat_mi2s_sd2_active
-			 &quat_mi2s_sd3_active>;
-	pinctrl-names = "default";
-	model = "DB845c";
-	audio-routing =
-		"RX_BIAS", "MCLK",
-		"AMIC1", "MIC BIAS1",
-		"AMIC2", "MIC BIAS2",
-		"DMIC0", "MIC BIAS1",
-		"DMIC1", "MIC BIAS1",
-		"DMIC2", "MIC BIAS3",
-		"DMIC3", "MIC BIAS3",
-		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MM_DL4",  "MultiMedia4 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	mm2-dai-link {
-		link-name = "MultiMedia2";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
-		};
-	};
-
-	mm3-dai-link {
-		link-name = "MultiMedia3";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
-		};
-	};
-
-	mm4-dai-link {
-		link-name = "MultiMedia4";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI Playback";
-		cpu {
-			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&lt9611_codec 0>;
-		};
-	};
-
-	slim-dai-link {
-		link-name = "SLIM Playback";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
-		};
-	};
-
-	slimcap-dai-link {
-		link-name = "SLIM Capture";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_TX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9340 1>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qup_spi0_default>;
-	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-
-	can@0 {
-		compatible = "microchip,mcp2517fd";
-		reg = <0>;
-		clocks = <&clk40M>;
-		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&vdc_5v>;
-		xceiver-supply = <&vdc_5v>;
-	};
-};
-
-&spi2 {
-	/* On Low speed expansion */
-	status = "okay";
-};
-
-&tlmm {
-	cam0_default: cam0-default-state {
-		rst-pins {
-			pins = "gpio9";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		mclk0-pins {
-			pins = "gpio13";
-			function = "cam_mclk";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	cam3_default: cam3-default-state {
-		rst-pins {
-			function = "gpio";
-			pins = "gpio21";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		mclk3-pins {
-			function = "cam_mclk";
-			pins = "gpio16";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	dsi_sw_sel: dsi-sw-sel-state {
-		pins = "gpio120";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-		output-high;
-	};
-
-	lt9611_irq_pin: lt9611-irq-state {
-		pins = "gpio84";
-		function = "gpio";
-		bias-disable;
-	};
-
-	pcie0_default_state: pcie0-default-state {
-		clkreq-pins {
-			pins = "gpio36";
-			function = "pci_e0";
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio35";
-			function = "gpio";
-
-			drive-strength = <2>;
-			output-low;
-			bias-pull-down;
-		};
-
-		wake-n-pins {
-			pins = "gpio37";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_pwren_state: pcie0-pwren-state {
-		pins = "gpio90";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		perst-n-pins {
-			pins = "gpio102";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		clkreq-pins {
-			pins = "gpio103";
-			function = "pci_e1";
-			bias-pull-up;
-		};
-
-		wake-n-pins {
-			pins = "gpio11";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio75";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-
-	sdc2_default_state: sdc2-default-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			bias-disable;
-
-			/*
-			 * It seems that mmc_test reports errors if drive
-			 * strength is not 16 on clk, cmd, and data pins.
-			 */
-			drive-strength = <16>;
-		};
-
-		cmd-pins {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data-pins {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-	};
-
-	sdc2_card_det_n: sd-card-det-n-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-pull-up;
-	};
-};
-
-&uart3 {
-	label = "LS-UART0";
-	pinctrl-0 = <&qup_uart3_4pin>;
-
-	status = "disabled";
-};
-
-&uart6 {
-	status = "okay";
-
-	pinctrl-0 = <&qup_uart6_4pin>;
-
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-	};
-};
-
-&uart9 {
-	label = "LS-UART1";
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_1_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l26a_1p2>;
-	vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l26a_1p2>;
-	vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vcc-max-microamp = <800000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&venus {
-	status = "okay";
-};
-
-&wcd9340 {
-	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-
-	swm: swm@c85 {
-		left_spkr: speaker@0,1 {
-			compatible = "sdw10217201000";
-			reg = <0 1>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
-			#thermal-sensor-cells = <0>;
-			sound-name-prefix = "SpkrLeft";
-			#sound-dai-cells = <0>;
-		};
-
-		right_spkr: speaker@0,2 {
-			compatible = "sdw10217201000";
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
-			reg = <0 2>;
-			#thermal-sensor-cells = <0>;
-			sound-name-prefix = "SpkrRight";
-			#sound-dai-cells = <0>;
-		};
-	};
-};
-
-&wifi {
-	status = "okay";
-
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-
-	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi2_default {
-	drive-strength = <16>;
-};
-
-&qup_i2c10_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_uart9_rx {
-	drive-strength = <2>;
-	bias-pull-up;
-};
-
-&qup_uart9_tx {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi0_default {
-	drive-strength = <6>;
-	bias-disable;
 };
