diff mbox series

[v3,04/15] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property

Message ID 20230718-sm6125-dpu-v3-4-6c5a56e99820@somainline.org
State Accepted
Commit 3a06fa8e518568e9fb0252b53c89d2d66d5037ad
Headers show
Series drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand

Commit Message

Marijn Suijten July 18, 2023, 9:24 p.m. UTC
On SM6125 the dispcc block is gated behind VDDCX: allow this domain to
be configured.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../devicetree/bindings/clock/qcom,dispcc-sm6125.yaml    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
index 8fd29915bf2c..0a3ef7fd03fa 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -48,6 +48,16 @@  properties:
   '#power-domain-cells':
     const: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
   reg:
     maxItems: 1
 
@@ -65,9 +75,11 @@  examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
     #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@5f00000 {
       compatible = "qcom,sm6125-dispcc";
       reg = <0x5f00000 0x20000>;
+
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&dsi0_phy 0>,
                <&dsi0_phy 1>,
@@ -84,6 +96,10 @@  examples:
                     "dp_phy_pll_vco_div_clk",
                     "cfg_ahb_clk",
                     "gcc_disp_gpll0_div_clk_src";
+
+      required-opps = <&rpmhpd_opp_ret>;
+      power-domains = <&rpmpd SM6125_VDDCX>;
+
       #clock-cells = <1>;
       #power-domain-cells = <1>;
     };