| Message ID | 20230723-sm6125-dpu-v4-17-a3f287dd6c07@somainline.org |
|---|---|
| State | Accepted |
| Commit | 5078dfe3c5c7b8d2d6494c26de81a4f3d4a5a3d7 |
| Headers | show |
| Series | drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand |
On Sun, Jul 23, 2023 at 11:09 AM Marijn Suijten <marijn.suijten@somainline.org> wrote: > > Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01 > 6.0" 1080x2520 panel. > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 59 ++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > index 82b0da5bb794..62c3e6d8147c 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > @@ -179,6 +179,43 @@ &i2c3 { > /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ > }; > > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dsi0 { > + vdda-supply = <&pm6125_l18>; > + status = "okay"; > + > + panel@0 { > + compatible = "samsung,sofef01-m-ams597ut01"; This needs to be documented. Rob
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 82b0da5bb794..62c3e6d8147c 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -179,6 +179,43 @@ &i2c3 { /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18>; + status = "okay"; + + panel@0 { + compatible = "samsung,sofef01-m-ams597ut01"; + reg = <0>; + + reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>; + + vddio-supply = <&pm6125_l12>; + + pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; @@ -469,6 +506,28 @@ vol_down_n: vol-down-n-state { drive-strength = <2>; bias-disable; }; + + mdss_te_active_sleep: mdss-te-active-sleep-state { + pins = "gpio89"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_dsi_active: mdss-dsi-active-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss-dsi-sleep-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; &usb3 {