From patchwork Fri Aug 18 15:23:27 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 714757 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 02EDBC73C66 for ; Fri, 18 Aug 2023 15:25:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1378118AbjHRPYa (ORCPT ); Fri, 18 Aug 2023 11:24:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33160 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1357271AbjHRPX5 (ORCPT ); Fri, 18 Aug 2023 11:23:57 -0400 Received: from mail-lf1-x132.google.com (mail-lf1-x132.google.com [IPv6:2a00:1450:4864:20::132]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0852F3A94 for ; Fri, 18 Aug 2023 08:23:55 -0700 (PDT) Received: by mail-lf1-x132.google.com with SMTP id 2adb3069b0e04-4ff09632194so1380978e87.2 for ; Fri, 18 Aug 2023 08:23:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1692372233; x=1692977033; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=1C0vCDTaaUlQQOaP+aUyo87dt8SzTy/fVmI6KNG6Qfg=; b=wx9p9RSXvwziATlMwVYVVrbpx2Z9ABqklNhv/UuFDKnTWuxJqVrVQesIlZlG3rmqEr gctgW1zDC1tib5AhcVcao2DJ6dlNn5lUlZQ9v4i1NCKeaNJfv91d/aFBEM1zQb4NvgFn Bsvmz9yDgo1jknBdhFmLnboozdHWSAgxVQ7uzfZaHGWBnaysoq/OcBHiYHri39idW9Cs s/dJjYhjN1YwB8peBF97w+gTXr0VsqY31IV/42GXC6zk2y5c4QbdTDPC1hX2bg2zWtHV cNRZTGaGfhlNw+Fq77tSD+OYLGoeORSPeKyEvFxVm//dXxJ43xZa1WtBE4l3jgWHfyD6 FN0g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1692372233; x=1692977033; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1C0vCDTaaUlQQOaP+aUyo87dt8SzTy/fVmI6KNG6Qfg=; b=X2jOzLcVlFmbTi4vlQ2Ny1H7sy+X9BxfOI02Mt94irUwIf3rE4qo35/3513i/1MVM7 dWbnNLpi1DLkVUGseqDcrSXZ77RL23FtMrZqqSvuUsJOXwkohRXvvmhMpdqjTWmgjUI7 UIrEf6SPOtZiJ2NfSUPxrGZIyVvNQiTeqY2kH48rDnli6YDGtMLJj+U/jkOMT+HpWFGJ edFEbcMjoyTsPMAoMHenllBtTtFE3DyTgkjpbHZMqZPDUC8sw3854KhIlNhuAEV+BjSZ O2H+e9sOOuCZKABDFBE2PUVoUYS3zJJMKupbpZbG7QLJ/NPCnqa8nShhr8HJUuCDw8Ab GMRw== X-Gm-Message-State: AOJu0Yzulf1uXHrrGSALte4lsvLGhcJpqiYkAf0uf09p4W0C3LnmvPfg cKAb2gfU2XkK+VGgiX90eThT+A== X-Google-Smtp-Source: AGHT+IHYRePZMnnp6MM60liWo6ROE9kW+vSENW75nQbCW8CoaiZiXyLXxcof3BJkVQM0RoAXa5gL3g== X-Received: by 2002:a19:7616:0:b0:4fe:1e69:c37b with SMTP id c22-20020a197616000000b004fe1e69c37bmr1828659lff.10.1692372233316; Fri, 18 Aug 2023 08:23:53 -0700 (PDT) Received: from [192.168.1.101] (abxh52.neoplus.adsl.tpnet.pl. [83.9.1.52]) by smtp.gmail.com with ESMTPSA id y2-20020ac24202000000b004fe4d122a66sm383715lfh.187.2023.08.18.08.23.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 18 Aug 2023 08:23:53 -0700 (PDT) From: Konrad Dybcio Date: Fri, 18 Aug 2023 17:23:27 +0200 Subject: [PATCH 4/5] arm64: dts: qcom: sm6375-murray: Separate out common parts MIME-Version: 1.0 Message-Id: <20230818-topic-10v-v1-4-dbb6464223c6@linaro.org> References: <20230818-topic-10v-v1-0-dbb6464223c6@linaro.org> In-Reply-To: <20230818-topic-10v-v1-0-dbb6464223c6@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kees Cook , Tony Luck , "Guilherme G. Piccoli" Cc: Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Krzysztof Kozlowski , linux-hardening@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1692372226; l=18160; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=N8+JyTSCBYvOorQ+CdiyBuRQvt/vFE9GwEbDEamdj/U=; b=DoY727hXHG4qQyuaodsCRofdFlP0La/wHB1AoFDAfuZmQVXXqKasGc7sc6FgmWf+b0rwj/t/3 Z8Cgbsg6vliC6h6c+FndkZAKlfvz5L8EZ+5DQUcfxPT3zVPpVDjbq33 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org There's a new kid in the Murray family, let's make space for it! Signed-off-by: Konrad Dybcio --- .../dts/qcom/sm6375-sony-xperia-murray-pdx225.dts | 421 +------------------- .../boot/dts/qcom/sm6375-sony-xperia-murray.dtsi | 427 +++++++++++++++++++++ 2 files changed, 428 insertions(+), 420 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index b2f1bb1d58e9..bcbef6ed7006 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -5,429 +5,10 @@ /dts-v1/; -/* PMK8350 is configured to use SID6 instead of 0 */ -#define PMK8350_SID 6 - -#include -#include "sm6375.dtsi" -#include "pm6125.dtsi" -#include "pmk8350.dtsi" -#include "pmr735a.dtsi" - -/* PM6125 PON is used and we can't have duplicate labels */ -/delete-node/ &pmk8350_pon; +#include "sm6375-sony-xperia-murray.dtsi" / { model = "Sony Xperia 10 IV"; compatible = "sony,pdx225", "qcom,sm6375"; chassis-type = "handset"; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - framebuffer: framebuffer@85200000 { - compatible = "simple-framebuffer"; - reg = <0 0x85200000 0 0xc00000>; - - width = <1080>; - height = <2520>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - /* - * That's (going to be) a lot of clocks, but it's necessary due - * to unused clk cleanup & no panel driver yet - */ - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, - <&gcc GCC_DISP_THROTTLE_CORE_CLK>, - <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - label = "gpio-keys"; - - pinctrl-0 = <&vol_down_n>; - pinctrl-names = "default"; - - key-volume-down { - label = "Volume Down"; - linux,code = ; - gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; - debounce-interval = <15>; - linux,can-disable; - wakeup-source; - }; - }; - - reserved-memory { - cont_splash_mem: memory@85200000 { - reg = <0 0x85200000 0 0xc00000>; - no-map; - }; - - ramoops@ffc40000 { - compatible = "ramoops"; - reg = <0 0xffc40000 0 0xb0000>; - record-size = <0x10000>; - console-size = <0x60000>; - ftrace-size = <0x10000>; - pmsg-size = <0x20000>; - ecc-size = <16>; - }; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&sdc2_off_state { - sd-cd-pins { - pins = "gpio94"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; - -&sdc2_on_state { - sd-cd-pins { - pins = "gpio94"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&sdhc_2 { - status = "okay"; - - vmmc-supply = <&pm6125_l22>; - vqmmc-supply = <&pm6125_l5>; - - cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; -}; - -&gpi_dma0 { - status = "okay"; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&i2c8 { - clock-frequency = <400000>; - status = "okay"; - - touchscreen@48 { - compatible = "samsung,s6sy761"; - reg = <0x48>; - interrupt-parent = <&tlmm>; - interrupts = <22 0x2008>; - - vdd-supply = <&pm6125_l13>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_default &ts_avdd_default>; - }; -}; - -&pmk8350_adc_tm { - status = "okay"; -}; - -&pmk8350_rtc { - status = "okay"; -}; - -&pmr735a_gpios { - vol_down_n: vol-down-n-state { - pins = "gpio1"; - function = "normal"; - power-source = <1>; - bias-pull-up; - input-enable; - }; -}; - -&pon_pwrkey { - status = "okay"; -}; - -&pon_resin { - linux,code = ; - status = "okay"; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn"; - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn"; - status = "okay"; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm6125-regulators"; - - pm6125_s5: s5 { - regulator-min-microvolt = <382000>; - regulator-max-microvolt = <1120000>; - }; - - pm6125_s6: s6 { - regulator-min-microvolt = <320000>; - regulator-max-microvolt = <1374000>; - }; - - pm6125_s7: s7 { - regulator-min-microvolt = <1574000>; - regulator-max-microvolt = <2040000>; - }; - - /* - * S8 is VDD_GFX - * L1 is VDD_LPI_CX - */ - - pm6125_l2: l2 { - regulator-min-microvolt = <1170000>; - regulator-max-microvolt = <1304000>; - }; - - pm6125_l3: l3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - }; - - pm6125_l4: l4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - }; - - pm6125_l5: l5 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - - pm6125_l6: l6 { - regulator-min-microvolt = <1080000>; - regulator-max-microvolt = <1304000>; - }; - - pm6125_l7: l7 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - }; - - pm6125_l8: l8 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1304000>; - }; - - pm6125_l9: l9 { - regulator-min-microvolt = <1504000>; - regulator-max-microvolt = <2000000>; - }; - - pm6125_l10: l10 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - }; - - pm6125_l11: l11 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - }; - - pm6125_l12: l12 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - }; - - pm6125_l13: l13 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1980000>; - }; - - pm6125_l14: l14 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - }; - - pm6125_l15: l15 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3544000>; - }; - - pm6125_l16: l16 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - }; - - /* L17 is VDD_LPI_MX */ - - pm6125_l18: l18 { - regulator-min-microvolt = <830000>; - regulator-max-microvolt = <920000>; - }; - - pm6125_l19: l19 { - regulator-min-microvolt = <1624000>; - regulator-max-microvolt = <3304000>; - }; - - pm6125_l20: l20 { - regulator-min-microvolt = <1624000>; - regulator-max-microvolt = <3304000>; - }; - - pm6125_l21: l21 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; - }; - - pm6125_l22: l22 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - - pm6125_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; - }; - - pm6125_l24: l24 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <3544000>; - }; - }; - - regulators-1 { - compatible = "qcom,rpm-pmr735a-regulators"; - - /* - * S1 is VDD_MX - * S2 is VDD_CX - */ - - pmr735a_l1: l1 { - regulator-min-microvolt = <570000>; - regulator-max-microvolt = <650000>; - }; - - pmr735a_l2: l2 { - regulator-min-microvolt = <352000>; - regulator-max-microvolt = <796000>; - }; - - pmr735a_l3: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - }; - - pmr735a_l4: l4 { - regulator-min-microvolt = <1504000>; - regulator-max-microvolt = <2000000>; - }; - - pmr735a_l5: l5 { - regulator-min-microvolt = <751000>; - regulator-max-microvolt = <824000>; - }; - - pmr735a_l6: l6 { - regulator-min-microvolt = <504000>; - regulator-max-microvolt = <868000>; - }; - - pmr735a_l7: l7 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - }; - }; -}; - -&sdc2_off_state { - sd-cd-pins { - pins = "gpio94"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; - -&sdc2_on_state { - sd-cd-pins { - pins = "gpio94"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&sdhc_2 { - status = "okay"; - - vmmc-supply = <&pm6125_l22>; - vqmmc-supply = <&pm6125_l5>; - - cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; -}; - -&tlmm { - gpio-reserved-ranges = <13 4>; - - ts_int_default: ts-int-default-state { - pins = "gpio22"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - - ts_avdd_default: ts-avdd-default-state { - pins = "gpio59"; - function = "gpio"; - drive-strength = <8>; - output-high; - }; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray.dtsi b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray.dtsi new file mode 100644 index 000000000000..072f7ce2a7f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray.dtsi @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio + */ + +/* PMK8350 is configured to use SID6 instead of 0 */ +#define PMK8350_SID 6 + +#include +#include "sm6375.dtsi" +#include "pm6125.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" + +/* PM6125 PON is used and we can't have duplicate labels */ +/delete-node/ &pmk8350_pon; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@85200000 { + compatible = "simple-framebuffer"; + reg = <0 0x85200000 0 0xc00000>; + + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + linux,code = ; + gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + cont_splash_mem: memory@85200000 { + reg = <0 0x85200000 0 0xc00000>; + no-map; + }; + + ramoops@ffc40000 { + compatible = "ramoops"; + reg = <0 0xffc40000 0 0xb0000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + + vdd-supply = <&pm6125_l13>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default &ts_avdd_default>; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmr735a_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn"; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s5: s5 { + regulator-min-microvolt = <382000>; + regulator-max-microvolt = <1120000>; + }; + + pm6125_s6: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1374000>; + }; + + pm6125_s7: s7 { + regulator-min-microvolt = <1574000>; + regulator-max-microvolt = <2040000>; + }; + + /* + * S8 is VDD_GFX + * L1 is VDD_LPI_CX + */ + + pm6125_l2: l2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l7: l7 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + /* L17 is VDD_LPI_MX */ + + pm6125_l18: l18 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <920000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmr735a-regulators"; + + /* + * S1 is VDD_MX + * S2 is VDD_CX + */ + + pmr735a_l1: l1 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + }; + + pmr735a_l2: l2 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <796000>; + }; + + pmr735a_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: l4 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + pmr735a_l5: l5 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + pmr735a_l6: l6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <868000>; + }; + + pmr735a_l7: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>; + + ts_int_default: ts-int-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_avdd_default: ts-avdd-default-state { + pins = "gpio59"; + function = "gpio"; + drive-strength = <8>; + output-high; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <19200000>; +};