diff mbox series

[06/11] firmware: qcom-shm-bridge: new driver

Message ID 20230828192507.117334-7-bartosz.golaszewski@linaro.org
State New
Headers show
Series arm64: qcom: add and enable SHM Bridge support | expand

Commit Message

Bartosz Golaszewski Aug. 28, 2023, 7:25 p.m. UTC
This module is a platform driver that also exposes an interface for
kernel users to allocate blocks of memory shared with the trustzone.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/firmware/Kconfig                 |   8 +
 drivers/firmware/Makefile                |   1 +
 drivers/firmware/qcom-shm-bridge.c       | 452 +++++++++++++++++++++++
 include/linux/firmware/qcom/shm-bridge.h |  32 ++
 4 files changed, 493 insertions(+)
 create mode 100644 drivers/firmware/qcom-shm-bridge.c
 create mode 100644 include/linux/firmware/qcom/shm-bridge.h

Comments

Krzysztof Kozlowski Aug. 29, 2023, 8:18 a.m. UTC | #1
On 28/08/2023 21:25, Bartosz Golaszewski wrote:
> This module is a platform driver that also exposes an interface for
> kernel users to allocate blocks of memory shared with the trustzone.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  drivers/firmware/Kconfig                 |   8 +
>  drivers/firmware/Makefile                |   1 +
>  drivers/firmware/qcom-shm-bridge.c       | 452 +++++++++++++++++++++++
>  include/linux/firmware/qcom/shm-bridge.h |  32 ++
>  4 files changed, 493 insertions(+)
>  create mode 100644 drivers/firmware/qcom-shm-bridge.c
>  create mode 100644 include/linux/firmware/qcom/shm-bridge.h
> 

...

> +/**
> + * qcom_shm_bridge_to_phys_addr - Translate address from virtual to physical.
> + *
> + * @vaddr: Virtual address to translate.
> + *
> + * Return:
> + * Physical address corresponding to 'vaddr'.
> + */
> +phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
> +{
> +	struct qcom_shm_bridge_chunk *chunk;
> +	struct qcom_shm_bridge_pool *pool;
> +
> +	guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
> +
> +	chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
> +				  (unsigned long)vaddr);
> +	if (!chunk)
> +		return 0;
> +
> +	pool = chunk->parent;
> +
> +	guard(spinlock_irqsave)(&pool->lock);

Why both locks are spinlocks? The locks are used quite a lot.

> +
> +	return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
> +
> +static int qcom_shm_bridge_probe(struct platform_device *pdev)
> +{
> +	struct qcom_shm_bridge_pool *default_pool;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	/*
> +	 * We need to wait for the SCM device to be created and bound to the
> +	 * SCM driver.
> +	 */
> +	if (!qcom_scm_is_available())
> +		return -EPROBE_DEFER;

I think we miss here (and in all other drivers) device links to qcm.

> +
> +	ret = qcom_scm_enable_shm_bridge();
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "Failed to enable the SHM bridge\n");
> +
> +	default_pool = qcom_shm_bridge_pool_new_for_dev(
> +				dev, qcom_shm_bridge_default_pool_size);
> +	if (IS_ERR(default_pool))
> +		return dev_err_probe(dev, PTR_ERR(default_pool),
> +				     "Failed to create the default SHM Bridge pool\n");
> +
> +	WRITE_ONCE(qcom_shm_bridge_default_pool, default_pool);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id qcom_shm_bridge_of_match[] = {
> +	{ .compatible = "qcom,shm-bridge", },
> +	{ }
> +};
> +
> +static struct platform_driver qcom_shm_bridge_driver = {
> +	.driver = {
> +		.name = "qcom-shm-bridge",
> +		.of_match_table = qcom_shm_bridge_of_match,
> +		/*
> +		 * Once enabled, the SHM Bridge feature cannot be disabled so
> +		 * there's no reason to ever unbind the driver.
> +		 */
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = qcom_shm_bridge_probe,
> +};
> +
> +static int __init qcom_shm_bridge_init(void)
> +{
> +	return platform_driver_register(&qcom_shm_bridge_driver);
> +}
> +subsys_initcall(qcom_shm_bridge_init);

Why this is part of subsystem? Should be rather device_initcall... or
simply module (and a tristate).

Best regards,
Krzysztof
Krzysztof Kozlowski Aug. 29, 2023, 8:22 a.m. UTC | #2
On 28/08/2023 21:25, Bartosz Golaszewski wrote:
> +/**
> + * qcom_shm_bridge_pool_new - Create a new SHM Bridge memory pool.
> + *
> + * @size: Size of the pool.
> + *
> + * Creates a new Shared Memory Bridge pool from which users can allocate memory
> + * chunks. Must be called from process context.
> + *
> + * Return:
> + * Pointer to the newly created SHM Bridge pool with reference count set to 1
> + * or ERR_PTR().
> + */
> +struct qcom_shm_bridge_pool *qcom_shm_bridge_pool_new(size_t size)
> +{
> +	struct device *dev;
> +
> +	dev = bus_find_device_by_name(&platform_bus_type, NULL,
> +				      "qcom-shm-bridge");
> +	if (!dev)
> +		return ERR_PTR(-ENODEV);
> +
> +	return qcom_shm_bridge_pool_new_for_dev(dev, size);
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_new);

I do not see an user of this. Do not add exported symbols without users.
Drop export. I would even suggest drop the function entirely, why do we
need dead code?

> +
> +/**
> + * qcom_shm_bridge_pool_ref - Increate the refcount of an SHM Bridge pool.
> + *
> + * @pool: SHM Bridge pool of which the reference count to increase.
> + *
> + * Return:
> + * Pointer to the same pool object.
> + */
> +struct qcom_shm_bridge_pool *
> +qcom_shm_bridge_pool_ref(struct qcom_shm_bridge_pool *pool)
> +{
> +	kref_get(&pool->refcount);
> +
> +	return pool;
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_ref);

Ditto

> +
> +/**
> + * qcom_shm_bridge_pool_unref - Decrease the refcount of an SHM Bridge pool.
> + *
> + * @pool: SHM Bridge pool of which the reference count to decrease.
> + *
> + * Once the reference count reaches 0, the pool is released.
> + */
> +void qcom_shm_bridge_pool_unref(struct qcom_shm_bridge_pool *pool)
> +{
> +	kref_put(&pool->refcount, qcom_shm_bridge_pool_release);
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_unref);

Ditto

> +
> +static void devm_qcom_shm_bridge_pool_unref(void *data)
> +{
> +	struct qcom_shm_bridge_pool *pool = data;
> +
> +	qcom_shm_bridge_pool_unref(pool);
> +}
> +
> +/**
> + * devm_qcom_shm_bridge_pool_new - Managed variant of qcom_shm_bridge_pool_new.
> + *
> + * @dev: Device for which to map memory and which will manage this pool.
> + * @size: Size of the pool.
> + *
> + * Return:
> + * Pointer to the newly created SHM Bridge pool with reference count set to 1
> + * or ERR_PTR().
> + */
> +struct qcom_shm_bridge_pool *
> +devm_qcom_shm_bridge_pool_new(struct device *dev, size_t size)
> +{
> +	struct qcom_shm_bridge_pool *pool;
> +	int ret;
> +
> +	pool = qcom_shm_bridge_pool_new(size);
> +	if (IS_ERR(pool))
> +		return pool;
> +
> +	ret = devm_add_action_or_reset(dev, devm_qcom_shm_bridge_pool_unref,
> +				       pool);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	return pool;
> +}
> +EXPORT_SYMBOL_GPL(devm_qcom_shm_bridge_pool_new);

Ditto

> +
> +/**
> + * qcom_shm_bridge_alloc - Allocate a chunk of memory from an SHM Bridge pool.
> + *
> + * @pool: Pool to allocate memory from. May be NULL.
> + * @size: Number of bytes to allocate.
> + * @gfp: Allocation flags.
> + *
> + * If pool is NULL then the global fall-back pool is used.
> + *
> + * Return:
> + * Virtual address of the allocated memory or ERR_PTR(). Must be freed using
> + * qcom_shm_bridge_free().
> + */
> +void *qcom_shm_bridge_alloc(struct qcom_shm_bridge_pool *pool,
> +			    size_t size, gfp_t gfp)
> +{
> +	struct qcom_shm_bridge_chunk *chunk __free(kfree) = NULL;
> +	unsigned long vaddr;
> +	int ret;

...

> +
> +	return no_free_ptr(chunk)->vaddr;
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_alloc);
> +
> +/**
> + * qcom_shm_bridge_free - Free SHM Bridge memory allocated from the pool.
> + *
> + * @vaddr: Virtual address of the allocated memory to free.
> + */
> +void qcom_shm_bridge_free(void *vaddr)
> +{
> +	struct qcom_shm_bridge_chunk *chunk;
> +	struct qcom_shm_bridge_pool *pool;
> +
> +	scoped_guard(spinlock_irqsave, &qcom_shm_bridge_chunks_lock)
> +		chunk = radix_tree_delete_item(&qcom_shm_bridge_chunks,
> +					       (unsigned long)vaddr, NULL);
> +	if (!chunk)
> +		goto out_warn;
> +
> +	pool = chunk->parent;
> +
> +	guard(spinlock_irqsave)(&pool->lock);
> +
> +	list_for_each_entry(chunk, &pool->chunks, siblings) {
> +		if (vaddr != chunk->vaddr)
> +			continue;
> +
> +		gen_pool_free(pool->genpool, (unsigned long)chunk->vaddr,
> +			      chunk->size);
> +		list_del(&chunk->siblings);
> +		qcom_shm_bridge_pool_unref(pool);
> +		kfree(chunk);
> +		return;
> +	}
> +
> +out_warn:
> +	WARN(1, "Virtual address %p not allocated for SHM bridge", vaddr);
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_free);
> +

...

> +phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
> +{
> +	struct qcom_shm_bridge_chunk *chunk;
> +	struct qcom_shm_bridge_pool *pool;
> +
> +	guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
> +
> +	chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
> +				  (unsigned long)vaddr);
> +	if (!chunk)
> +		return 0;
> +
> +	pool = chunk->parent;
> +
> +	guard(spinlock_irqsave)(&pool->lock);
> +
> +	return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
> +}
> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);

Ditto

Best regards,
Krzysztof
Bartosz Golaszewski Aug. 29, 2023, 1:24 p.m. UTC | #3
On Tue, 29 Aug 2023 at 10:18, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 28/08/2023 21:25, Bartosz Golaszewski wrote:
> > This module is a platform driver that also exposes an interface for
> > kernel users to allocate blocks of memory shared with the trustzone.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > ---
> >  drivers/firmware/Kconfig                 |   8 +
> >  drivers/firmware/Makefile                |   1 +
> >  drivers/firmware/qcom-shm-bridge.c       | 452 +++++++++++++++++++++++
> >  include/linux/firmware/qcom/shm-bridge.h |  32 ++
> >  4 files changed, 493 insertions(+)
> >  create mode 100644 drivers/firmware/qcom-shm-bridge.c
> >  create mode 100644 include/linux/firmware/qcom/shm-bridge.h
> >
>
> ...
>
> > +/**
> > + * qcom_shm_bridge_to_phys_addr - Translate address from virtual to physical.
> > + *
> > + * @vaddr: Virtual address to translate.
> > + *
> > + * Return:
> > + * Physical address corresponding to 'vaddr'.
> > + */
> > +phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
> > +{
> > +     struct qcom_shm_bridge_chunk *chunk;
> > +     struct qcom_shm_bridge_pool *pool;
> > +
> > +     guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
> > +
> > +     chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
> > +                               (unsigned long)vaddr);
> > +     if (!chunk)
> > +             return 0;
> > +
> > +     pool = chunk->parent;
> > +
> > +     guard(spinlock_irqsave)(&pool->lock);
>
> Why both locks are spinlocks? The locks are used quite a lot.

I'm not sure what to answer. The first one protects the global chunk
mapping stored in the radix tree. The second one protects a single
memory pool from concurrent access. Both can be modified from any
context, hence spinlocks.

>
> > +
> > +     return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
> > +}
> > +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
> > +
> > +static int qcom_shm_bridge_probe(struct platform_device *pdev)
> > +{
> > +     struct qcom_shm_bridge_pool *default_pool;
> > +     struct device *dev = &pdev->dev;
> > +     int ret;
> > +
> > +     /*
> > +      * We need to wait for the SCM device to be created and bound to the
> > +      * SCM driver.
> > +      */
> > +     if (!qcom_scm_is_available())
> > +             return -EPROBE_DEFER;
>
> I think we miss here (and in all other drivers) device links to qcm.
>

Well, SCM, once probed, cannot be unbound. What would device links
guarantee above that?

> > +
> > +     ret = qcom_scm_enable_shm_bridge();
> > +     if (ret)
> > +             return dev_err_probe(dev, ret,
> > +                                  "Failed to enable the SHM bridge\n");
> > +
> > +     default_pool = qcom_shm_bridge_pool_new_for_dev(
> > +                             dev, qcom_shm_bridge_default_pool_size);
> > +     if (IS_ERR(default_pool))
> > +             return dev_err_probe(dev, PTR_ERR(default_pool),
> > +                                  "Failed to create the default SHM Bridge pool\n");
> > +
> > +     WRITE_ONCE(qcom_shm_bridge_default_pool, default_pool);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id qcom_shm_bridge_of_match[] = {
> > +     { .compatible = "qcom,shm-bridge", },
> > +     { }
> > +};
> > +
> > +static struct platform_driver qcom_shm_bridge_driver = {
> > +     .driver = {
> > +             .name = "qcom-shm-bridge",
> > +             .of_match_table = qcom_shm_bridge_of_match,
> > +             /*
> > +              * Once enabled, the SHM Bridge feature cannot be disabled so
> > +              * there's no reason to ever unbind the driver.
> > +              */
> > +             .suppress_bind_attrs = true,
> > +     },
> > +     .probe = qcom_shm_bridge_probe,
> > +};
> > +
> > +static int __init qcom_shm_bridge_init(void)
> > +{
> > +     return platform_driver_register(&qcom_shm_bridge_driver);
> > +}
> > +subsys_initcall(qcom_shm_bridge_init);
>
> Why this is part of subsystem? Should be rather device_initcall... or
> simply module (and a tristate).
>

We want it to get up as soon as possible (right after SCM, because SCM
is the first user).

Bartosz

> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Aug. 29, 2023, 4:47 p.m. UTC | #4
On 29/08/2023 15:24, Bartosz Golaszewski wrote:
>>> +phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
>>> +{
>>> +     struct qcom_shm_bridge_chunk *chunk;
>>> +     struct qcom_shm_bridge_pool *pool;
>>> +
>>> +     guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
>>> +
>>> +     chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
>>> +                               (unsigned long)vaddr);
>>> +     if (!chunk)
>>> +             return 0;
>>> +
>>> +     pool = chunk->parent;
>>> +
>>> +     guard(spinlock_irqsave)(&pool->lock);
>>
>> Why both locks are spinlocks? The locks are used quite a lot.
> 
> I'm not sure what to answer. The first one protects the global chunk
> mapping stored in the radix tree. The second one protects a single
> memory pool from concurrent access. Both can be modified from any
> context, hence spinlocks.

Not much PREEMPT friendly, although indeed protected code is small. At
least here, I did not check other places.

> 
>>
>>> +
>>> +     return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
>>> +}
>>> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
>>> +
>>> +static int qcom_shm_bridge_probe(struct platform_device *pdev)
>>> +{
>>> +     struct qcom_shm_bridge_pool *default_pool;
>>> +     struct device *dev = &pdev->dev;
>>> +     int ret;
>>> +
>>> +     /*
>>> +      * We need to wait for the SCM device to be created and bound to the
>>> +      * SCM driver.
>>> +      */
>>> +     if (!qcom_scm_is_available())
>>> +             return -EPROBE_DEFER;
>>
>> I think we miss here (and in all other drivers) device links to qcm.
>>
> 
> Well, SCM, once probed, cannot be unbound. What would device links
> guarantee above that?

Runtime PM, probe ordering (dependencies) detection.

> 
>>> +
>>> +     ret = qcom_scm_enable_shm_bridge();
>>> +     if (ret)
>>> +             return dev_err_probe(dev, ret,
>>> +                                  "Failed to enable the SHM bridge\n");
>>> +
>>> +     default_pool = qcom_shm_bridge_pool_new_for_dev(
>>> +                             dev, qcom_shm_bridge_default_pool_size);
>>> +     if (IS_ERR(default_pool))
>>> +             return dev_err_probe(dev, PTR_ERR(default_pool),
>>> +                                  "Failed to create the default SHM Bridge pool\n");
>>> +
>>> +     WRITE_ONCE(qcom_shm_bridge_default_pool, default_pool);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static const struct of_device_id qcom_shm_bridge_of_match[] = {
>>> +     { .compatible = "qcom,shm-bridge", },
>>> +     { }
>>> +};
>>> +
>>> +static struct platform_driver qcom_shm_bridge_driver = {
>>> +     .driver = {
>>> +             .name = "qcom-shm-bridge",
>>> +             .of_match_table = qcom_shm_bridge_of_match,
>>> +             /*
>>> +              * Once enabled, the SHM Bridge feature cannot be disabled so
>>> +              * there's no reason to ever unbind the driver.
>>> +              */
>>> +             .suppress_bind_attrs = true,
>>> +     },
>>> +     .probe = qcom_shm_bridge_probe,
>>> +};
>>> +
>>> +static int __init qcom_shm_bridge_init(void)
>>> +{
>>> +     return platform_driver_register(&qcom_shm_bridge_driver);
>>> +}
>>> +subsys_initcall(qcom_shm_bridge_init);
>>
>> Why this is part of subsystem? Should be rather device_initcall... or
>> simply module (and a tristate).
>>
> 
> We want it to get up as soon as possible (right after SCM, because SCM
> is the first user).

Then probably should be populated/spawned by SCM.

Best regards,
Krzysztof
Bartosz Golaszewski Aug. 30, 2023, 1:09 p.m. UTC | #5
On Tue, 29 Aug 2023 at 18:47, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 29/08/2023 15:24, Bartosz Golaszewski wrote:
> >>> +phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
> >>> +{
> >>> +     struct qcom_shm_bridge_chunk *chunk;
> >>> +     struct qcom_shm_bridge_pool *pool;
> >>> +
> >>> +     guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
> >>> +
> >>> +     chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
> >>> +                               (unsigned long)vaddr);
> >>> +     if (!chunk)
> >>> +             return 0;
> >>> +
> >>> +     pool = chunk->parent;
> >>> +
> >>> +     guard(spinlock_irqsave)(&pool->lock);
> >>
> >> Why both locks are spinlocks? The locks are used quite a lot.
> >
> > I'm not sure what to answer. The first one protects the global chunk
> > mapping stored in the radix tree. The second one protects a single
> > memory pool from concurrent access. Both can be modified from any
> > context, hence spinlocks.
>
> Not much PREEMPT friendly, although indeed protected code is small. At
> least here, I did not check other places.
>
> >
> >>
> >>> +
> >>> +     return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
> >>> +
> >>> +static int qcom_shm_bridge_probe(struct platform_device *pdev)
> >>> +{
> >>> +     struct qcom_shm_bridge_pool *default_pool;
> >>> +     struct device *dev = &pdev->dev;
> >>> +     int ret;
> >>> +
> >>> +     /*
> >>> +      * We need to wait for the SCM device to be created and bound to the
> >>> +      * SCM driver.
> >>> +      */
> >>> +     if (!qcom_scm_is_available())
> >>> +             return -EPROBE_DEFER;
> >>
> >> I think we miss here (and in all other drivers) device links to qcm.
> >>
> >
> > Well, SCM, once probed, cannot be unbound. What would device links
> > guarantee above that?
>
> Runtime PM, probe ordering (dependencies) detection.
>

Shouldn't we cross that bridge when we get there? SCM has no support
for runtime PM. Probe ordering is quite well handled with a simple
probe deferral. This is also not a parent-child relationship. SHM
Bridge calls into the trustzone using SCM, but SCM is also a user of
SHM Bridge.

> >
> >>> +
> >>> +     ret = qcom_scm_enable_shm_bridge();
> >>> +     if (ret)
> >>> +             return dev_err_probe(dev, ret,
> >>> +                                  "Failed to enable the SHM bridge\n");
> >>> +
> >>> +     default_pool = qcom_shm_bridge_pool_new_for_dev(
> >>> +                             dev, qcom_shm_bridge_default_pool_size);
> >>> +     if (IS_ERR(default_pool))
> >>> +             return dev_err_probe(dev, PTR_ERR(default_pool),
> >>> +                                  "Failed to create the default SHM Bridge pool\n");
> >>> +
> >>> +     WRITE_ONCE(qcom_shm_bridge_default_pool, default_pool);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static const struct of_device_id qcom_shm_bridge_of_match[] = {
> >>> +     { .compatible = "qcom,shm-bridge", },
> >>> +     { }
> >>> +};
> >>> +
> >>> +static struct platform_driver qcom_shm_bridge_driver = {
> >>> +     .driver = {
> >>> +             .name = "qcom-shm-bridge",
> >>> +             .of_match_table = qcom_shm_bridge_of_match,
> >>> +             /*
> >>> +              * Once enabled, the SHM Bridge feature cannot be disabled so
> >>> +              * there's no reason to ever unbind the driver.
> >>> +              */
> >>> +             .suppress_bind_attrs = true,
> >>> +     },
> >>> +     .probe = qcom_shm_bridge_probe,
> >>> +};
> >>> +
> >>> +static int __init qcom_shm_bridge_init(void)
> >>> +{
> >>> +     return platform_driver_register(&qcom_shm_bridge_driver);
> >>> +}
> >>> +subsys_initcall(qcom_shm_bridge_init);
> >>
> >> Why this is part of subsystem? Should be rather device_initcall... or
> >> simply module (and a tristate).
> >>
> >
> > We want it to get up as soon as possible (right after SCM, because SCM
> > is the first user).
>
> Then probably should be populated/spawned by SCM.
>

I really prefer probe deferral over one platform driver creating
platform devices for another. The device is on the DT, let's let OF
populate it as it should.

Bart
Krzysztof Kozlowski Aug. 30, 2023, 2:31 p.m. UTC | #6
On 30/08/2023 15:09, Bartosz Golaszewski wrote:

>>>>> +
>>>>> +     return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
>>>>> +
>>>>> +static int qcom_shm_bridge_probe(struct platform_device *pdev)
>>>>> +{
>>>>> +     struct qcom_shm_bridge_pool *default_pool;
>>>>> +     struct device *dev = &pdev->dev;
>>>>> +     int ret;
>>>>> +
>>>>> +     /*
>>>>> +      * We need to wait for the SCM device to be created and bound to the
>>>>> +      * SCM driver.
>>>>> +      */
>>>>> +     if (!qcom_scm_is_available())
>>>>> +             return -EPROBE_DEFER;
>>>>
>>>> I think we miss here (and in all other drivers) device links to qcm.
>>>>
>>>
>>> Well, SCM, once probed, cannot be unbound. What would device links
>>> guarantee above that?
>>
>> Runtime PM, probe ordering (dependencies) detection.
>>
> 
> Shouldn't we cross that bridge when we get there? SCM has no support
> for runtime PM. Probe ordering is quite well handled with a simple
> probe deferral. This is also not a parent-child relationship. SHM
> Bridge calls into the trustzone using SCM, but SCM is also a user of
> SHM Bridge.

OK

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b59e3041fd62..39f35ba18779 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -226,6 +226,14 @@  config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
 
 	  Say Y here to enable "download mode" by default.
 
+config QCOM_SHM_BRIDGE
+	bool "Qualcomm SHM bridge driver"
+	depends on QCOM_SCM
+	help
+	  Say yes here to enable support for Qualcomm TEE Shared Memory Bridge.
+	  This module exposes interfaces that allow kernel users to allocate
+	  blocks of memory shared with the trustzone.
+
 config SYSFB
 	bool
 	select BOOT_VESA_SUPPORT
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 28fcddcd688f..ba1590cf959c 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -20,6 +20,7 @@  obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
 obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom-scm.o
 qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SHM_BRIDGE)	+= qcom-shm-bridge.o
 obj-$(CONFIG_SYSFB)		+= sysfb.o
 obj-$(CONFIG_SYSFB_SIMPLEFB)	+= sysfb_simplefb.o
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
diff --git a/drivers/firmware/qcom-shm-bridge.c b/drivers/firmware/qcom-shm-bridge.c
new file mode 100644
index 000000000000..db76c5c5061d
--- /dev/null
+++ b/drivers/firmware/qcom-shm-bridge.c
@@ -0,0 +1,452 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Linaro Limited
+ */
+
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/device/bus.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/firmware/qcom/shm-bridge.h>
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/radix-tree.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define QCOM_SHM_BRIDGE_NUM_VM_SHIFT 9
+
+DEFINE_FREE(qcom_shm_bridge_pool, struct qcom_shm_bridge_pool *,
+	    if (_T) qcom_shm_bridge_pool_unref(_T))
+
+/*
+ * Size of the global fall-back pool can be adjusted using this param. Use 4M
+ * as a sane default.
+ */
+static unsigned int qcom_shm_bridge_default_pool_size = SZ_4M;
+module_param_named(default_pool_size, qcom_shm_bridge_default_pool_size,
+		   uint, 0644);
+
+struct qcom_shm_bridge_pool {
+	struct device *dev;
+	void *vaddr;
+	phys_addr_t paddr;
+	size_t size;
+	uint64_t handle;
+	struct gen_pool *genpool;
+	struct list_head chunks;
+	spinlock_t lock;
+	struct kref refcount;
+};
+
+struct qcom_shm_bridge_chunk {
+	void *vaddr;
+	size_t size;
+	struct qcom_shm_bridge_pool *parent;
+	struct list_head siblings;
+};
+
+/* This is the global fall-back pool, used if user doesn't supply their own. */
+static struct qcom_shm_bridge_pool *qcom_shm_bridge_default_pool;
+
+static RADIX_TREE(qcom_shm_bridge_chunks, GFP_ATOMIC);
+static DEFINE_SPINLOCK(qcom_shm_bridge_chunks_lock);
+
+static void qcom_shm_bridge_pool_release(struct kref *kref)
+{
+	struct qcom_shm_bridge_pool *pool =
+		container_of(kref, struct qcom_shm_bridge_pool, refcount);
+
+	if (pool->handle)
+		qcom_scm_delete_shm_bridge(pool->dev, pool->handle);
+
+	if (pool->genpool)
+		gen_pool_destroy(pool->genpool);
+
+	if (pool->paddr)
+		dma_unmap_single(pool->dev, pool->paddr, pool->size,
+				 DMA_TO_DEVICE);
+
+	if (pool->vaddr)
+		free_pages((unsigned long)pool->vaddr, get_order(pool->size));
+
+	put_device(pool->dev);
+	kfree(pool);
+}
+
+static int qcom_shm_bridge_create(struct qcom_shm_bridge_pool *pool)
+{
+	uint64_t pfn_and_ns_perm, ipfn_and_s_perm, size_and_flags, ns_vmids,
+		 ns_perms, handle;
+	int ret;
+
+	ns_perms = (QCOM_SCM_PERM_WRITE | QCOM_SCM_PERM_READ);
+	ns_vmids = QCOM_SCM_VMID_HLOS;
+	pfn_and_ns_perm = (u64)pool->paddr | ns_perms;
+	ipfn_and_s_perm = (u64)pool->paddr | ns_perms;
+	size_and_flags = pool->size | (1 << QCOM_SHM_BRIDGE_NUM_VM_SHIFT);
+
+	ret = qcom_scm_create_shm_bridge(pool->dev, pfn_and_ns_perm,
+					 ipfn_and_s_perm, size_and_flags,
+					 ns_vmids, &handle);
+	if (!ret)
+		pool->handle = handle;
+
+	return ret;
+}
+
+static struct qcom_shm_bridge_pool *
+qcom_shm_bridge_pool_new_for_dev(struct device *dev, size_t size)
+{
+	struct qcom_shm_bridge_pool *pool __free(qcom_shm_bridge_pool) = NULL;
+	int ret;
+
+	if (!qcom_scm_shm_bridge_available())
+		return ERR_PTR(-ENODEV);
+
+	if (!size)
+		return ERR_PTR(-EINVAL);
+
+	pool = kzalloc(sizeof(*pool), GFP_KERNEL);
+	if (!pool)
+		return ERR_PTR(-ENOMEM);
+
+	pool->dev = get_device(dev);
+	pool->size = size;
+	INIT_LIST_HEAD(&pool->chunks);
+	spin_lock_init(&pool->lock);
+	kref_init(&pool->refcount);
+
+	pool->vaddr = (void *)__get_free_pages(GFP_KERNEL | GFP_DMA,
+					       get_order(pool->size));
+	if (!pool->vaddr)
+		return ERR_PTR(-ENOMEM);
+
+	pool->paddr = dma_map_single(pool->dev, pool->vaddr, pool->size,
+				     DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, pool->paddr))
+		return ERR_PTR(-ENOMEM);
+
+	pool->genpool = gen_pool_create(PAGE_SHIFT, -1);
+	if (!pool->genpool)
+		return ERR_PTR(-ENOMEM);
+
+	gen_pool_set_algo(pool->genpool, gen_pool_best_fit, NULL);
+
+	ret = gen_pool_add_virt(pool->genpool, (unsigned long)pool->vaddr,
+				pool->paddr, pool->size, -1);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = qcom_shm_bridge_create(pool);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return no_free_ptr(pool);
+}
+
+/**
+ * qcom_shm_bridge_pool_new - Create a new SHM Bridge memory pool.
+ *
+ * @size: Size of the pool.
+ *
+ * Creates a new Shared Memory Bridge pool from which users can allocate memory
+ * chunks. Must be called from process context.
+ *
+ * Return:
+ * Pointer to the newly created SHM Bridge pool with reference count set to 1
+ * or ERR_PTR().
+ */
+struct qcom_shm_bridge_pool *qcom_shm_bridge_pool_new(size_t size)
+{
+	struct device *dev;
+
+	dev = bus_find_device_by_name(&platform_bus_type, NULL,
+				      "qcom-shm-bridge");
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	return qcom_shm_bridge_pool_new_for_dev(dev, size);
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_new);
+
+/**
+ * qcom_shm_bridge_pool_ref - Increate the refcount of an SHM Bridge pool.
+ *
+ * @pool: SHM Bridge pool of which the reference count to increase.
+ *
+ * Return:
+ * Pointer to the same pool object.
+ */
+struct qcom_shm_bridge_pool *
+qcom_shm_bridge_pool_ref(struct qcom_shm_bridge_pool *pool)
+{
+	kref_get(&pool->refcount);
+
+	return pool;
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_ref);
+
+/**
+ * qcom_shm_bridge_pool_unref - Decrease the refcount of an SHM Bridge pool.
+ *
+ * @pool: SHM Bridge pool of which the reference count to decrease.
+ *
+ * Once the reference count reaches 0, the pool is released.
+ */
+void qcom_shm_bridge_pool_unref(struct qcom_shm_bridge_pool *pool)
+{
+	kref_put(&pool->refcount, qcom_shm_bridge_pool_release);
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_pool_unref);
+
+static void devm_qcom_shm_bridge_pool_unref(void *data)
+{
+	struct qcom_shm_bridge_pool *pool = data;
+
+	qcom_shm_bridge_pool_unref(pool);
+}
+
+/**
+ * devm_qcom_shm_bridge_pool_new - Managed variant of qcom_shm_bridge_pool_new.
+ *
+ * @dev: Device for which to map memory and which will manage this pool.
+ * @size: Size of the pool.
+ *
+ * Return:
+ * Pointer to the newly created SHM Bridge pool with reference count set to 1
+ * or ERR_PTR().
+ */
+struct qcom_shm_bridge_pool *
+devm_qcom_shm_bridge_pool_new(struct device *dev, size_t size)
+{
+	struct qcom_shm_bridge_pool *pool;
+	int ret;
+
+	pool = qcom_shm_bridge_pool_new(size);
+	if (IS_ERR(pool))
+		return pool;
+
+	ret = devm_add_action_or_reset(dev, devm_qcom_shm_bridge_pool_unref,
+				       pool);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return pool;
+}
+EXPORT_SYMBOL_GPL(devm_qcom_shm_bridge_pool_new);
+
+/**
+ * qcom_shm_bridge_alloc - Allocate a chunk of memory from an SHM Bridge pool.
+ *
+ * @pool: Pool to allocate memory from. May be NULL.
+ * @size: Number of bytes to allocate.
+ * @gfp: Allocation flags.
+ *
+ * If pool is NULL then the global fall-back pool is used.
+ *
+ * Return:
+ * Virtual address of the allocated memory or ERR_PTR(). Must be freed using
+ * qcom_shm_bridge_free().
+ */
+void *qcom_shm_bridge_alloc(struct qcom_shm_bridge_pool *pool,
+			    size_t size, gfp_t gfp)
+{
+	struct qcom_shm_bridge_chunk *chunk __free(kfree) = NULL;
+	unsigned long vaddr;
+	int ret;
+
+	if (!pool) {
+		pool = READ_ONCE(qcom_shm_bridge_default_pool);
+		if (!pool)
+			return ERR_PTR(-ENODEV);
+	}
+
+	if (!size || size > pool->size)
+		return ERR_PTR(-EINVAL);
+
+	size = roundup(size, 1 << PAGE_SHIFT);
+
+	chunk = kzalloc(sizeof(*chunk), gfp);
+	if (!chunk)
+		return ERR_PTR(-ENOMEM);
+
+	guard(spinlock_irqsave)(&pool->lock);
+
+	vaddr = gen_pool_alloc(pool->genpool, size);
+	if (!vaddr)
+		return ERR_PTR(-ENOMEM);
+
+	chunk->vaddr = (void *)vaddr;
+	chunk->size = size;
+	chunk->parent = pool;
+	list_add_tail(&chunk->siblings, &pool->chunks);
+	qcom_shm_bridge_pool_ref(pool);
+
+	guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
+
+	ret = radix_tree_insert(&qcom_shm_bridge_chunks, vaddr, chunk);
+	if (ret) {
+		gen_pool_free(pool->genpool, vaddr, chunk->size);
+		return ERR_PTR(ret);
+	}
+
+	return no_free_ptr(chunk)->vaddr;
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_alloc);
+
+/**
+ * qcom_shm_bridge_free - Free SHM Bridge memory allocated from the pool.
+ *
+ * @vaddr: Virtual address of the allocated memory to free.
+ */
+void qcom_shm_bridge_free(void *vaddr)
+{
+	struct qcom_shm_bridge_chunk *chunk;
+	struct qcom_shm_bridge_pool *pool;
+
+	scoped_guard(spinlock_irqsave, &qcom_shm_bridge_chunks_lock)
+		chunk = radix_tree_delete_item(&qcom_shm_bridge_chunks,
+					       (unsigned long)vaddr, NULL);
+	if (!chunk)
+		goto out_warn;
+
+	pool = chunk->parent;
+
+	guard(spinlock_irqsave)(&pool->lock);
+
+	list_for_each_entry(chunk, &pool->chunks, siblings) {
+		if (vaddr != chunk->vaddr)
+			continue;
+
+		gen_pool_free(pool->genpool, (unsigned long)chunk->vaddr,
+			      chunk->size);
+		list_del(&chunk->siblings);
+		qcom_shm_bridge_pool_unref(pool);
+		kfree(chunk);
+		return;
+	}
+
+out_warn:
+	WARN(1, "Virtual address %p not allocated for SHM bridge", vaddr);
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_free);
+
+/**
+ * devm_qcom_shm_bridge_alloc - Managed variant of qcom_shm_bridge_alloc.
+ *
+ * @dev: Managing device.
+ * @pool: Pool to allocate memory from.
+ * @size: Number of bytes to allocate.
+ * @gfp: Allocation flags.
+ *
+ * Return:
+ * Virtual address of the allocated memory or ERR_PTR().
+ */
+void *devm_qcom_shm_bridge_alloc(struct device *dev,
+				 struct qcom_shm_bridge_pool *pool,
+				 size_t size, gfp_t gfp)
+{
+	void *vaddr;
+	int ret;
+
+	vaddr = qcom_shm_bridge_alloc(pool, size, gfp);
+	if (IS_ERR(vaddr))
+		return vaddr;
+
+	ret = devm_add_action_or_reset(dev, qcom_shm_bridge_free, vaddr);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return vaddr;
+}
+EXPORT_SYMBOL_GPL(devm_qcom_shm_bridge_alloc);
+
+/**
+ * qcom_shm_bridge_to_phys_addr - Translate address from virtual to physical.
+ *
+ * @vaddr: Virtual address to translate.
+ *
+ * Return:
+ * Physical address corresponding to 'vaddr'.
+ */
+phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr)
+{
+	struct qcom_shm_bridge_chunk *chunk;
+	struct qcom_shm_bridge_pool *pool;
+
+	guard(spinlock_irqsave)(&qcom_shm_bridge_chunks_lock);
+
+	chunk = radix_tree_lookup(&qcom_shm_bridge_chunks,
+				  (unsigned long)vaddr);
+	if (!chunk)
+		return 0;
+
+	pool = chunk->parent;
+
+	guard(spinlock_irqsave)(&pool->lock);
+
+	return gen_pool_virt_to_phys(pool->genpool, (unsigned long)vaddr);
+}
+EXPORT_SYMBOL_GPL(qcom_shm_bridge_to_phys_addr);
+
+static int qcom_shm_bridge_probe(struct platform_device *pdev)
+{
+	struct qcom_shm_bridge_pool *default_pool;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	/*
+	 * We need to wait for the SCM device to be created and bound to the
+	 * SCM driver.
+	 */
+	if (!qcom_scm_is_available())
+		return -EPROBE_DEFER;
+
+	ret = qcom_scm_enable_shm_bridge();
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to enable the SHM bridge\n");
+
+	default_pool = qcom_shm_bridge_pool_new_for_dev(
+				dev, qcom_shm_bridge_default_pool_size);
+	if (IS_ERR(default_pool))
+		return dev_err_probe(dev, PTR_ERR(default_pool),
+				     "Failed to create the default SHM Bridge pool\n");
+
+	WRITE_ONCE(qcom_shm_bridge_default_pool, default_pool);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_shm_bridge_of_match[] = {
+	{ .compatible = "qcom,shm-bridge", },
+	{ }
+};
+
+static struct platform_driver qcom_shm_bridge_driver = {
+	.driver = {
+		.name = "qcom-shm-bridge",
+		.of_match_table = qcom_shm_bridge_of_match,
+		/*
+		 * Once enabled, the SHM Bridge feature cannot be disabled so
+		 * there's no reason to ever unbind the driver.
+		 */
+		.suppress_bind_attrs = true,
+	},
+	.probe = qcom_shm_bridge_probe,
+};
+
+static int __init qcom_shm_bridge_init(void)
+{
+	return platform_driver_register(&qcom_shm_bridge_driver);
+}
+subsys_initcall(qcom_shm_bridge_init);
diff --git a/include/linux/firmware/qcom/shm-bridge.h b/include/linux/firmware/qcom/shm-bridge.h
new file mode 100644
index 000000000000..df066a2f6d91
--- /dev/null
+++ b/include/linux/firmware/qcom/shm-bridge.h
@@ -0,0 +1,32 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 Linaro Limited
+ */
+
+#ifndef _LINUX_QCOM_SHM_BRIDGE
+#define _LINUX_QCOM_SHM_BRIDGE
+
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/types.h>
+
+struct qcom_shm_bridge_pool;
+
+struct qcom_shm_bridge_pool *qcom_shm_bridge_pool_new(size_t size);
+struct qcom_shm_bridge_pool *
+qcom_shm_bridge_pool_ref(struct qcom_shm_bridge_pool *pool);
+void qcom_shm_bridge_pool_unref(struct qcom_shm_bridge_pool *pool);
+struct qcom_shm_bridge_pool *
+devm_qcom_shm_bridge_pool_new(struct device *dev, size_t size);
+
+void *qcom_shm_bridge_alloc(struct qcom_shm_bridge_pool *pool,
+			    size_t size, gfp_t gfp);
+void qcom_shm_bridge_free(void *vaddr);
+void *devm_qcom_shm_bridge_alloc(struct device *dev,
+				 struct qcom_shm_bridge_pool *pool,
+				 size_t size, gfp_t gfp);
+
+phys_addr_t qcom_shm_bridge_to_phys_addr(void *vaddr);
+
+#endif /* _LINUX_QCOM_SHM_BRIDGE */