diff mbox series

[v3,2/2] phy: qcom-qmp-combo: initialize PCS_USB registers

Message ID 20230829-topic-8550_usbphy-v3-2-34ec434194c5@linaro.org
State Accepted
Commit 76d20290d0c66a84a7a40c6231e73d1ab25994e5
Headers show
Series 8550 USB QMPPHY fixups | expand

Commit Message

Konrad Dybcio Sept. 11, 2023, 8:07 p.m. UTC
Currently, PCS_USB registers that have their initialization data in a
pcs_usb_tbl table are never initialized. Fix that.

Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region")
Reported-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 8fd240dd5127..5e6fc8103e9d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2555,6 +2555,7 @@  static int qmp_combo_usb_power_on(struct phy *phy)
 	void __iomem *tx2 = qmp->tx2;
 	void __iomem *rx2 = qmp->rx2;
 	void __iomem *pcs = qmp->pcs;
+	void __iomem *pcs_usb = qmp->pcs_usb;
 	void __iomem *status;
 	unsigned int val;
 	int ret;
@@ -2576,6 +2577,9 @@  static int qmp_combo_usb_power_on(struct phy *phy)
 
 	qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
+	if (pcs_usb)
+		qmp_combo_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
+
 	if (cfg->has_pwrdn_delay)
 		usleep_range(10, 20);