diff mbox series

[7/7] arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin

Message ID 20230926-topic-a643-v1-7-7af6937ac0a3@linaro.org
State Accepted
Commit 6a7f8c635dab30233df93b5566d4169ed956b71b
Headers show
Series Adreno 643 + fixes | expand

Commit Message

Konrad Dybcio Sept. 26, 2023, 6:24 p.m. UTC
A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the
opp-supported-hw appropriately.

Note that fuseval 0xac is referred to as speedbin 1 downstream, but
that was already in use upstream, so 2 was chosen instead.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index edaca6c2cf8c..ccc2dd6c45de 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2626,14 +2626,14 @@  opp-315000000 {
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2648,28 +2648,28 @@  opp-550000000-1 {
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {