@@ -3,6 +3,8 @@
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@ chosen {
stdout-path = "serial0";
};
+ reserved-memory {
+ /delete-node/ reserved@86680000;
+ /delete-node/ rmtfs@86700000;
+
+ rmtfs: rmtfs@86680000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x86680000 0x0 0x160000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -50,6 +65,17 @@ led-0 {
};
};
+ reg_headphones_avdd: regulator-headphones-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "headphones_avdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-0 = <&headphones_avdd_default>;
+ pinctrl-names = "default";
+ };
+
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,6 +84,43 @@ usb_id: usb-id {
};
};
+&blsp_i2c3 {
+ status = "okay";
+
+ headphones: audio-codec@10 {
+ compatible = "asahi-kasei,ak4375";
+ reg = <0x10>;
+ avdd-supply = <®_headphones_avdd>;
+ tvdd-supply = <&pm8916_l6>;
+ pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&headphones_pdn_default>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ };
+
+ speaker_codec_top: audio-codec@34 {
+ compatible = "nxp,tfa9897";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l6>;
+ rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_top_default>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Top";
+ #sound-dai-cells = <0>;
+ };
+
+ speaker_codec_bottom: audio-codec@36 {
+ compatible = "nxp,tfa9897";
+ reg = <0x36>;
+ vddd-supply = <&pm8916_l6>;
+ rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_bottom_default>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Bottom";
+ #sound-dai-cells = <0>;
+ };
+};
+
&blsp_i2c4 {
status = "okay";
@@ -153,6 +216,18 @@ &blsp_uart2 {
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+ qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@ &pm8916_vib {
status = "okay";
};
+&q6afedai {
+ dai@18 {
+ reg = <SECONDARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+};
+
&sdhc_1 {
status = "okay";
};
@@ -183,6 +269,54 @@ &sdhc_2 {
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ /* Add pin switches for speakers to allow disabling them individually */
+ model = "alcatel-idol3";
+ widgets =
+ "Speaker", "Speaker Top",
+ "Speaker", "Speaker Bottom";
+ pin-switches = "Speaker Top", "Speaker Bottom";
+ audio-routing =
+ "Speaker Top", "Speaker Top OUT",
+ "Speaker Bottom", "Speaker Bottom OUT",
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+ };
+ };
+};
+
+&sound_link_backend0 {
+ /* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+ link-name = "Secondary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&headphones>;
+ };
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +346,15 @@ &wcnss_mem {
status = "okay";
};
+/* Only some of the pins are used */
+&pri_mi2s_default {
+ pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+ pins = "gpio113", "gpio115";
+};
+
&tlmm {
accel_int_default: accel-int-default-state {
pins = "gpio31";
@@ -245,6 +388,20 @@ gyro_int_default: gyro-int-default-state {
bias-disable;
};
+ headphones_avdd_default: headphones-avdd-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ headphones_pdn_default: headphones-pdn-default-state {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
/*
* The OEM wired an additional GPIO to be asserted so that
* the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +448,20 @@ sdc2_cd_default: sdc2-cd-default-state {
bias-disable;
};
+ speaker_bottom_default: speaker-bottom-default-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ speaker_top_default: speaker-top-default-state {
+ pins = "gpio50";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_reset_default: ts-int-reset-default-state {
pins = "gpio13", "gpio100";
function = "gpio";