From patchwork Sat Nov 25 14:17:37 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 747164 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="RJp8o3LB" Received: from mail-ej1-x62a.google.com (mail-ej1-x62a.google.com [IPv6:2a00:1450:4864:20::62a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 934461FC0 for ; Sat, 25 Nov 2023 06:18:09 -0800 (PST) Received: by mail-ej1-x62a.google.com with SMTP id a640c23a62f3a-a00f67f120aso383652766b.2 for ; Sat, 25 Nov 2023 06:18:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700921888; x=1701526688; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=5DFGDMbVRO34D0rwNcwL3fZ3HlqOpwc3rrc9FYjKLyI=; b=RJp8o3LBubW9rrNwBo/+/86ZV8oNlfteWvhLKoh+sCA2oyHXNUGwGAGr9oB5W4qiNl o5CXsDvle33XmaT8/GOuo3W3Nu9JWns3Iqr56tgbiSNhhg7Bt1Kgc9IPyzeo+LZT/rFX K+xuIXsxjni1zM4ytRNthL7N/gpbZu6AO5w3dZ7dSZ8obtDrpgw77t3hgu0b84M3rvBt hARQBowtWUmQ/xupXthHbgFgglLwAjfPv19E63VPwZlXwwDhXFDZGBzzYIpCy5dOeioO OUwX6aS7ZdetdMGsxzpo24RQP3iMdbOJFRnK0MAeRqJd41yMVKieELM1sf07viZfOm5F xkDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700921888; x=1701526688; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=5DFGDMbVRO34D0rwNcwL3fZ3HlqOpwc3rrc9FYjKLyI=; b=tenSbUl97c+oWEPn1mUdU6Q1ZA/b5rnxf48uPuG4lAl7krc1Tv6P9iYe1aLLvFwGtE 5S0FXaYio3Zxq5Iqzxd6X29v0hTduNeAY9bJsLaaMzbUc+vOBrpaPYg+Freu93F2nSWz BhbKZnhtBEwlEEIL9bzxwJuy5oPmX4u5XK2huq7376iu+sIvxdHiLJAw30tk6bGDoVAd 4uKPomB2TDlgTMRC/dAfqYf3uII0cFEbGyin/1X0m2kQkGUdSXOXdOd0o3NmQKDfXLYd M8m+QIUfWdtno43PKQn/78oaex7OAHAvojQUTno5vYyzy/5sG1IpjYrtZQE6+pJBFYJe SS/Q== X-Gm-Message-State: AOJu0YxNtfIHWJj12dYjSQ97pnjUV+5vQTqKoYXkWB/557EJweafbTI6 H4U6/1dIbtmmQEZS06G9iEpjOg== X-Google-Smtp-Source: AGHT+IFcGjhIp+n5IghU+zQjHP4JNWWQXFdYUIN8Smid6wnp5LgNh42mrJ0DT8XSx9jkX4eM255vhA== X-Received: by 2002:a17:906:74c5:b0:a00:3bc8:d481 with SMTP id z5-20020a17090674c500b00a003bc8d481mr4674731ejl.16.1700921887821; Sat, 25 Nov 2023 06:18:07 -0800 (PST) Received: from [10.167.154.1] (178235187180.dynamic-4-waw-k-2-3-0.vectranet.pl. [178.235.187.180]) by smtp.gmail.com with ESMTPSA id 19-20020a170906319300b00992b8d56f3asm3500345ejy.105.2023.11.25.06.18.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 25 Nov 2023 06:18:07 -0800 (PST) From: Konrad Dybcio Date: Sat, 25 Nov 2023 15:17:37 +0100 Subject: [PATCH 09/12] arm64: dts: qcom: qcm2290: Hook up interconnects Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231125-topic-rb1_feat-v1-9-11d71b12b058@linaro.org> References: <20231125-topic-rb1_feat-v1-0-11d71b12b058@linaro.org> In-Reply-To: <20231125-topic-rb1_feat-v1-0-11d71b12b058@linaro.org> To: Rob Clark , Abhinav Kumar , Dmitry Baryshkov , Sean Paul , David Airlie , Daniel Vetter , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Loic Poulain , Bryan O'Donoghue , Andy Gross , Bjorn Andersson , Krzysztof Kozlowski , Georgi Djakov , Will Deacon , Robin Murphy , Joerg Roedel , Krishna Manikandan , Robert Marko , Das Srinagesh Cc: Marijn Suijten , Rob Herring , linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1700921858; l=14818; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=ldwUkmN/d0nEA5rH0T4Lp0JlzbHnDDZfoK2dQJvE38o=; b=dHKG8XUWw85YPcoTNjnwb9Ao0Oqw9ptw3nKKF/j97ijklljBqEMNh6CTrnEE5g4kzirMEn3Of L583j2LNIVnAMayAzkBIin+MJQkR55fqroaWDEskNRDytsGJbBfZspm X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Add interconnect provider nodes and hook up interconnects to consumer devices, including bwmon. Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 248 ++++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index a3edc4667cc5..ce04d0acdede 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include / { @@ -151,6 +153,8 @@ scm: scm { clocks = <&rpmcc RPM_SMD_CE1_CLK>; clock-names = "core"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; }; }; @@ -669,6 +673,33 @@ usb_qmpphy: phy@1615000 { status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x0 0x01880000 0x0 0x60200>; + #interconnect-cells = <2>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x0 0x01900000 0x0 0x8200>; + #interconnect-cells = <2>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -681,6 +712,60 @@ qusb2_hstx_trim: hstx-trim@25b { }; }; + pmu@1b8e300 { + compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = ; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -721,6 +806,12 @@ rng: rng@4453000 { clock-names = "core"; }; + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x0 0x045f0000 0x0 0x7000>; @@ -756,13 +847,45 @@ sdhc_1: mmc@4744000 { resets = <&gcc GCC_SDCC1_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0xc0 0x0>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -786,6 +909,12 @@ sdhc_2: mmc@4784000 { power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0xa0 0x0>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -799,11 +928,15 @@ sdhc2_opp_table: opp-table { opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -851,6 +984,15 @@ i2c0: i2c@4a80000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -867,6 +1009,12 @@ spi0: spi@4a80000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -880,6 +1028,12 @@ uart0: serial@4a80000 { clock-names = "se"; pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -894,6 +1048,15 @@ i2c1: i2c@4a84000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -910,6 +1073,12 @@ spi1: spi@4a84000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -926,6 +1095,15 @@ i2c2: i2c@4a88000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -942,6 +1120,12 @@ spi2: spi@4a88000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -958,6 +1142,15 @@ i2c3: i2c@4a8c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -974,6 +1167,12 @@ spi3: spi@4a8c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -990,6 +1189,15 @@ i2c4: i2c@4a90000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1006,6 +1214,12 @@ spi4: spi@4a90000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1019,6 +1233,12 @@ uart4: serial@4a90000 { clock-names = "se"; pinctrl-0 = <&qup_uart4_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1033,6 +1253,15 @@ i2c5: i2c@4a94000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1049,6 +1278,12 @@ spi5: spi@4a94000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1081,6 +1316,13 @@ usb: usb@4ef8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; wakeup-source; #address-cells = <2>; @@ -1127,6 +1369,12 @@ mdss: display-subsystem@5e00000 { iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; #address-cells = <2>; #size-cells = <2>;