diff mbox series

[net-next,01/14] net: phy: at803x: fix passing the wrong reference for config_intr

Message ID 20231129021219.20914-2-ansuelsmth@gmail.com
State Accepted
Commit f8fdbf3389f44c7026f16e36cb1f2ff017f7f5b2
Headers show
Series net: phy: at803x: cleanup + split | expand

Commit Message

Christian Marangi Nov. 29, 2023, 2:12 a.m. UTC 
Fix passing the wrong reference for config_initr on passing the function
pointer, drop the wrong & from at803x_config_intr in the PHY struct.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Andrew Lunn Nov. 30, 2023, 2:50 p.m. UTC | #1 
On Wed, Nov 29, 2023 at 03:12:06AM +0100, Christian Marangi wrote:
> Fix passing the wrong reference for config_initr on passing the function
> pointer, drop the wrong & from at803x_config_intr in the PHY struct.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 37fb033e1c29..ef203b0807e5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -2104,7 +2104,7 @@  static struct phy_driver at803x_driver[] = {
 	.write_page		= at803x_write_page,
 	.get_features		= at803x_get_features,
 	.read_status		= at803x_read_status,
-	.config_intr		= &at803x_config_intr,
+	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
 	.set_tunable		= at803x_set_tunable,
@@ -2134,7 +2134,7 @@  static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	.flags			= PHY_POLL_CABLE_TEST,
 	/* PHY_BASIC_FEATURES */
-	.config_intr		= &at803x_config_intr,
+	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
 	.cable_test_get_status	= at803x_cable_test_get_status,
@@ -2150,7 +2150,7 @@  static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	.flags			= PHY_POLL_CABLE_TEST,
 	/* PHY_BASIC_FEATURES */
-	.config_intr		= &at803x_config_intr,
+	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
 	.cable_test_get_status	= at803x_cable_test_get_status,