@@ -1847,6 +1847,7 @@ gpu: gpu@3d00000 {
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
+ #cooling-cells = <2>;
status = "disabled";
@@ -4214,8 +4215,15 @@ gpu-top-thermal {
thermal-sensors = <&tsens1 1>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_top_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu1_alert0: trip-point0 {
+ gpu_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <1000>;
type = "hot";
@@ -4229,8 +4237,15 @@ gpu-bottom-thermal {
thermal-sensors = <&tsens1 2>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_bottom_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu2_alert0: trip-point0 {
+ gpu_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <1000>;
type = "hot";
In order to allow for throttling the GPU, hook up the cooling device to the respective thermal zones. Also, update the trip point label to be more telling, while at it. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)