diff mbox series

[01/10] dt-bindings: pwm: Add SI-EN SN3112 PWM support

Message ID 20240424-ayn-odin2-initial-v1-1-e0aa05c991fd@gmail.com
State New
Headers show
Series AYN Odin 2 support | expand

Commit Message

Xilin Wu via B4 Relay April 24, 2024, 3:29 p.m. UTC
From: Junhao Xie <bigfoot@classfun.cn>

Add a new driver for the SI-EN SN3112 12-channel 8-bit PWM LED controller.

Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
---
 .../devicetree/bindings/pwm/si-en,sn3112-pwm.yaml  | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)

Comments

Uwe Kleine-König April 25, 2024, 6:04 a.m. UTC | #1
Hello,

On Wed, Apr 24, 2024 at 11:29:06PM +0800, Xilin Wu via B4 Relay wrote:
> From: Junhao Xie <bigfoot@classfun.cn>
> 
> Add a new driver for the SI-EN SN3112 12-channel 8-bit PWM LED controller.
> 
> Signed-off-by: Junhao Xie <bigfoot@classfun.cn>

Missing S-o-b for patch submitter.

> +  "#pwm-cells":
> +    const: 1

please use 3 here (which is also what the driver implements)

Best regards
Uwe
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pwm/si-en,sn3112-pwm.yaml b/Documentation/devicetree/bindings/pwm/si-en,sn3112-pwm.yaml
new file mode 100644
index 000000000000..2ab229ac40ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/si-en,sn3112-pwm.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/si-en,sn3112-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SI-EN SN3112 12-channel 8-bit PWM LED controller
+
+maintainers:
+  - Junhao Xie <bigfoot@classfun.cn>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: si-en,sn3112-pwm
+
+  reg:
+    const: 0x54
+    description: I2C slave address
+
+  sdb-gpios:
+    maxItems: 1
+    description: GPIO pin to hardware shutdown the device.
+
+  vdd-supply:
+    description: Chip vdd supply
+
+  "#pwm-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pwm@54 {
+        compatible = "si-en,sn3112-pwm";
+        reg = <0x54>;
+        sdb-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; /* PA1 */
+        vdd-supply = <&reg_dcdc1>;
+        #pwm-cells = <1>;
+      };
+    };