diff mbox series

[RFC,v3,8/9] arm64: boot: dts: qcom: sm8550: Split into overlays

Message ID 20240521-board-ids-v3-8-e6c71d05f4d2@quicinc.com
State New
Headers show
Series None | expand

Commit Message

Elliot Berman May 21, 2024, 6:38 p.m. UTC
Generic sm8550 devicetree is split into a dtsi. Move it into its own DTB
and preserve the boards as overlays.

When not using overlays, 264 KB needed to store the sm8550-mtp.dtb and
sm8550-qrd.dtb. When using overlays, 188 KB is needed to store
sm8550.dtb, sm8550-mtp.dtbo, and sm8550-qrd.dtbo; where the overlays are
~36 KB.

Also add the board-ids for these DTBs.

This change is not intended to be merged, it breaks aliases and I doubt
it boots correct. The intent here is to show how board-id could be used
with a DTB and DTBO.

Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  4 ++++
 .../dts/qcom/{sm8550-mtp.dts => sm8550-mtp.dtso}   | 24 ++++++++++++++++++++--
 .../dts/qcom/{sm8550-qrd.dts => sm8550-qrd.dtso}   | 22 +++++++++++++++++---
 .../boot/dts/qcom/{sm8550.dtsi => sm8550.dts}      |  8 ++++++++
 4 files changed, 53 insertions(+), 5 deletions(-)

Comments

Krzysztof Kozlowski June 5, 2024, 8:20 a.m. UTC | #1
On 21/05/2024 20:38, Elliot Berman wrote:
>  
> +/dts-v1/;
> +
> +#include <dt-bindings/arm/qcom,ids.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sm8450-videocc.h>
>  #include <dt-bindings/clock/qcom,sm8550-camcc.h>
> @@ -32,6 +35,11 @@ / {
>  
>  	chosen { };
>  
> +	board_id: board-id {
> +		qcom,soc-version = <QCOM_ID_SM8550 QCOM_SOC_REVISION(1)>,
> +				   <QCOM_ID_SM8550 QCOM_SOC_REVISION(2)>;
> +	};


I don't see how does it help to understand usage of board-id. You list
all possible revisions, right? So this is entirely redundant.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e12..7f137f274d8c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -233,6 +233,10 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
+
+sm8550-mtp-dtbs		:= sm8550.dtb sm8550-mtp.dtbo
+sm8550-qrd-dtbs		:= sm8550.dtb sm8550-qrd.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
similarity index 98%
rename from arch/arm64/boot/dts/qcom/sm8550-mtp.dts
rename to arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
index c1135ad5fa69..0ee4614719ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
@@ -4,9 +4,12 @@ 
  */
 
 /dts-v1/;
+/plugin/;
 
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8550.dtsi"
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
@@ -17,13 +20,30 @@ 
 #include "pmr735d_a.dtsi"
 #include "pmr735d_b.dtsi"
 
+#define BOARD_ID	qcom,soc = <QCOM_ID_SM8550>; \
+			qcom,platform-type = <QCOM_BOARD_ID_MTP 0>
+
 / {
+	board-id {
+		BOARD_ID;
+	};
+};
+
+&{/} {
 	model = "Qualcomm Technologies, Inc. SM8550 MTP";
 	compatible = "qcom,sm8550-mtp", "qcom,sm8550";
 	chassis-type = "handset";
 
+	/**
+	 * Redefine the overlay in the DTBO so the sm8550-mtp.dtb that Kbuild
+	 * generates has accurate board-id.
+	 */
+	board-id {
+		BOARD_ID;
+	};
+
 	aliases {
-		serial0 = &uart7;
+		// serial0 = &uart7;
 	};
 
 	wcd938x: audio-codec {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
similarity index 98%
rename from arch/arm64/boot/dts/qcom/sm8550-qrd.dts
rename to arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
index d401d63e5c4d..f756c50a80b9 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
@@ -4,10 +4,14 @@ 
  */
 
 /dts-v1/;
+/plugin/;
 
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8550.dtsi"
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
@@ -19,13 +23,25 @@ 
 #include "pmr735d_b.dtsi"
 
 / {
+	board-id {
+		qcom,soc = <QCOM_ID_SM8550>;
+		qcom,platform = <QCOM_BOARD_ID_QRD>;
+	};
+};
+
+&{/} {
 	model = "Qualcomm Technologies, Inc. SM8550 QRD";
 	compatible = "qcom,sm8550-qrd", "qcom,sm8550";
 	chassis-type = "handset";
 
+	board-id {
+		qcom,soc = <QCOM_ID_SM8550>;
+		qcom,platform = <QCOM_BOARD_ID_QRD>;
+	};
+
 	aliases {
-		serial0 = &uart7;
-		serial1 = &uart14;
+		// serial0 = &uart7;
+		// serial1 = &uart14;
 	};
 
 	wcd938x: audio-codec {
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dts
similarity index 99%
rename from arch/arm64/boot/dts/qcom/sm8550.dtsi
rename to arch/arm64/boot/dts/qcom/sm8550.dts
index c68e08747b6f..3546ea4b96f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dts
@@ -3,6 +3,9 @@ 
  * Copyright (c) 2022, Linaro Limited
  */
 
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,sm8550-camcc.h>
@@ -32,6 +35,11 @@  / {
 
 	chosen { };
 
+	board_id: board-id {
+		qcom,soc-version = <QCOM_ID_SM8550 QCOM_SOC_REVISION(1)>,
+				   <QCOM_ID_SM8550 QCOM_SOC_REVISION(2)>;
+	};
+
 	clocks {
 		xo_board: xo-board {
 			compatible = "fixed-clock";