@@ -161,7 +161,7 @@ static struct clk_rcg2 gpu_cc_ff_clk_src = {
.name = "gpu_cc_ff_clk_src",
.parent_data = gpu_cc_parent_data_0,
.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_shared_ops,
},
};
@@ -181,7 +181,7 @@ static struct clk_rcg2 gpu_cc_gmu_clk_src = {
.parent_data = gpu_cc_parent_data_1,
.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_shared_ops,
},
};
@@ -200,7 +200,7 @@ static struct clk_rcg2 gpu_cc_hub_clk_src = {
.name = "gpu_cc_hub_clk_src",
.parent_data = gpu_cc_parent_data_2,
.num_parents = ARRAY_SIZE(gpu_cc_parent_data_2),
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_shared_ops,
},
};
@@ -294,7 +294,7 @@ static struct clk_branch gpu_cc_cb_clk = {
.enable_mask = BIT(0),
.hw.init = &(const struct clk_init_data){
.name = "gpu_cc_cb_clk",
- .ops = &clk_branch2_ops,
+ .ops = &clk_branch2_aon_ops,
},
},
};
The RCG's clk src has to be parked at XO while disabling as per the HW recommendation, hence use clk_rcg2_shared_ops to achieve the same. Also gpu_cc_cb_clk is recommended to be kept always ON, hence use clk_branch2_aon_ops to keep the clock always ON. Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> --- drivers/clk/qcom/gpucc-sa8775p.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)