@@ -366,7 +366,12 @@ uefi_log_mem: uefi-log@87f75000 {
no-map;
};
- qdss_mem: qdss@88800000 {
+ qdss_mem: qdss@88500000 {
+ reg = <0x0 0x88500000 0x0 0x300000>;
+ no-map;
+ };
+
+ qlink_logging_mem: qlink-logging@88800000 {
reg = <0x0 0x88800000 0x0 0x300000>;
no-map;
};
@@ -377,8 +382,13 @@ audio_heap_mem: audio-heap@88b00000 {
no-map;
};
- mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
- reg = <0x0 0x88f00000 0x0 0x5080000>;
+ mpss_dsm_mem_2: mpss-dsm-2@88f00000 {
+ reg = <0x0 0x88f00000 0x0 0x2500000>;
+ no-map;
+ };
+
+ mpss_dsm_mem: mpss-dsm@8b400000 {
+ reg = <0x0 0x8b400000 0x0 0x2b80000>;
no-map;
};
@@ -388,7 +398,7 @@ q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 {
};
mpssadsp_mem: mpssadsp@8e000000 {
- reg = <0x0 0x8e000000 0x0 0xf400000>;
+ reg = <0x0 0x8e000000 0x0 0xf100000>;
no-map;
};
Rename qdss@88800000 memory region as qlink_logging memory region and add qdss_mem memory region at address of 0x88500000, qlink_logging is being added at the memory region at the address of 0x88800000 as the region is being used by modem firmware. Since different DSM region size is required for different modem firmware, split mpss_dsmharq_mem region into 2 separate regions. This would provide the flexibility to remove the region which is not required for a particular platform. Based on the modem firmware either both the regions have to be used or only mpss_dsm_mem has to be used. Also, reduce the size of mpssadsp_mem region. Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com> --- arch/arm64/boot/dts/qcom/sdx75.dtsi | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)