diff mbox series

[RESEND,v2,3/3] Bluetooth: qca: run the power-on/off sequence for QCA6390 too

Message ID 20231208090936.27769-4-brgl@bgdev.pl
State Superseded
Headers show
Series Bluetooth: power-on QCA6390 correctly | expand

Commit Message

Bartosz Golaszewski Dec. 8, 2023, 9:09 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The Bluetooth module on QCA6390 needs to be powered-on by enabling the
relevant regulators and driving the enable GPIO high. We can reuse the
power sequence for the WNC models if we add the list of required
regulators to the OF match data.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 35f74f209d1f..b27be08a1f6f 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1788,6 +1788,7 @@  static int qca_power_on(struct hci_dev *hdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		ret = qca_regulator_init(hu);
 		break;
 
@@ -2044,7 +2045,15 @@  static const struct qca_device_data qca_soc_data_qca2066 __maybe_unused = {
 
 static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
 	.soc_type = QCA_QCA6390,
-	.num_vregs = 0,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 20000 },
+		{ "vddaon", 100000 },
+		{ "vddpmu", 1250000 },
+		{ "vddrfa0p9", 200000 },
+		{ "vddrfa1p3", 400000 },
+		{ "vddrfa1p9", 400000 },
+	},
+	.num_vregs = 6,
 };
 
 static const struct qca_device_data qca_soc_data_wcn6750 __maybe_unused = {
@@ -2129,6 +2138,7 @@  static void qca_power_shutdown(struct hci_uart *hu)
 
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_QCA6390:
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 		msleep(100);
 		qca_regulator_disable(qcadev);
@@ -2276,6 +2286,7 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -2386,6 +2397,7 @@  static void qca_serdev_remove(struct serdev_device *serdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		if (power->vregs_on) {
 			qca_power_shutdown(&qcadev->serdev_hu);
 			break;