diff mbox series

[V3,4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes

Message ID 20230518141105.24741-5-quic_anusha@quicinc.com
State Superseded
Headers show
Series Enable crypto for ipq9574 | expand

Commit Message

Anusha Canchi May 18, 2023, 2:11 p.m. UTC
Enable crypto support for ipq9574.

Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
---
 Changes in V3:
	- No change.

 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Krzysztof Kozlowski May 18, 2023, 2:43 p.m. UTC | #1
On 18/05/2023 16:11, Anusha Rao wrote:
> Enable crypto support for ipq9574.
> 
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Bhupesh Sharma May 22, 2023, 8:53 a.m. UTC | #2
On 5/18/23 7:41 PM, Anusha Rao <quic_anusha@quicinc.com> wrote:
> Enable crypto support for ipq9574.
> 
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> ---
>   Changes in V3:
> 	- No change.
> 
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index fea15f3cf910..6e52d35a6a15 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -123,6 +123,26 @@
>   			clock-names = "core";
>   		};
>   
> +		cryptobam: dma-controller@704000 {
> +			compatible = "qcom,bam-v1.7.0";

Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If "qcom,bam-v1.7.4" please use the newer compatible format.

Thanks,
Bhupesh

> +			reg = <0x00704000 0x20000>;
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			qcom,ee = <1>;
> +			qcom,controlled-remotely;
> +		};
> +
> +		crypto: crypto@73a000 {
> +			compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
> +			reg = <0x0073a000 0x6000>;
> +			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
> +				 <&gcc GCC_CRYPTO_AXI_CLK>,
> +				 <&gcc GCC_CRYPTO_CLK>;
> +			clock-names = "iface", "bus", "core";
> +			dmas = <&cryptobam 2>, <&cryptobam 3>;
> +			dma-names = "rx", "tx";
> +		};
> +
>   		tlmm: pinctrl@1000000 {
>   			compatible = "qcom,ipq9574-tlmm";
>   			reg = <0x01000000 0x300000>;
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index fea15f3cf910..6e52d35a6a15 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -123,6 +123,26 @@ 
 			clock-names = "core";
 		};
 
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq9574-tlmm";
 			reg = <0x01000000 0x300000>;