mbox series

[v3,0/3] clk: imx: add audio clock mux driver

Message ID 1688607078-4183-1-git-send-email-shengjiu.wang@nxp.com
Headers show
Series clk: imx: add audio clock mux driver | expand

Message

Shengjiu Wang July 6, 2023, 1:31 a.m. UTC 
The Audio Clock Mux (ACM) is a collection of control registers
and multiplexers that are used to route the audio source clocks
to the audio peripherals on i.MX8QXP, i.MX8QM, i.MX8DXL

Shengjiu Wang (3):
  dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
  dt-bindings: clock: imx8-clock: Add audio clock mux related clock
  clk: imx: imx8: add audio clock mux driver

 .../bindings/clock/fsl,imx8-acm.yaml          | 156 ++++++
 drivers/clk/imx/Makefile                      |   2 +-
 drivers/clk/imx/clk-imx8-acm.c                | 477 ++++++++++++++++++
 include/dt-bindings/clock/imx8-clock.h        |  28 +
 4 files changed, 662 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
 create mode 100644 drivers/clk/imx/clk-imx8-acm.c

Comments

Krzysztof Kozlowski July 6, 2023, 1:52 p.m. UTC | #1 
On 06/07/2023 03:31, Shengjiu Wang wrote:
> Add the clock dt-binding file for audio clock mux. which
> is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL.
> 
> The Audio clock mux is binded with all the audio IP and audio clocks
> in the subsystem, so need to list the power domain of related clocks
> and IPs. Each clock and IP has a power domain, so there are so many
> power domains.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

This is an automated instruction, just in case, because many review tags
are being ignored. If you do not know the process, here is a short
explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tools like b4 can help
here. However, there's no need to repost patches *only* to add the tags.
The upstream maintainer will do that for acks received on the version
they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

Best regards,
Krzysztof