mbox series

[v2,0/2] soc: ti: add k3 platforms chipid module driver

Message ID 20200505193417.2112-1-grygorii.strashko@ti.com
Headers show
Series soc: ti: add k3 platforms chipid module driver | expand

Message

Grygorii Strashko May 5, 2020, 7:34 p.m. UTC
Hi All,

This series introduces TI K3 Multicore SoC platforms chipid module driver
which provides identification support of the TI K3 SoCs (family, revision)
and register this information with the SoC bus. It is available under
/sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().
It is also required for introducing support for new revisions of
K3 AM65x/J721E SoCs.

Example J721E:
  # cat /sys/devices/soc0/{machine,family,revision}
  Texas Instruments K3 J721E SoC
  J721E
  SR1.0

Example AM65x:
  # cat /sys/devices/soc0/{machine,family,revision}
  Texas Instruments AM654 Base Board
  AM65X
  SR1.0

Changes in v2:
 - pr_debug() replaced with pr_info() to show SoC info on init
 - minor format change
 - split series on driver and platform changes
 - add Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

v1: https://lwn.net/Articles/818577/

Grygorii Strashko (2):
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  soc: ti: add k3 platforms chipid module driver

 .../bindings/soc/ti/k3-socinfo.yaml           |  40 ++++++
 drivers/soc/ti/Kconfig                        |  10 ++
 drivers/soc/ti/Makefile                       |   1 +
 drivers/soc/ti/k3-socinfo.c                   | 135 ++++++++++++++++++
 4 files changed, 186 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
 create mode 100644 drivers/soc/ti/k3-socinfo.c