| Message ID | 20201127201024.64836-1-nsekhar@ti.com |
|---|---|
| Headers | show |
| Series | arm64: dts: ti: k3-j721e: MMC/SD higher speed modes support | expand |
On 01:40-20201128, Sekhar Nori wrote: [...] > - main_usbss0_pins_default: main-usbss0-pins-default { > + vdd_sd_dv_alt_pins_default: vdd_sd_dv_alt_pins_default { > + pinctrl-single,pins = < > + J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ > + >; > + }; > + > + main_usbss0_pins_default: main_usbss0_pins_default { Could you not switch the node name to _ ? We just fixed that bunch. Now, this patch introduces the following with W=2: arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts: /bus@100000/pinctrl@11c000/vdd_sd_dv_alt_pins_default: Character '_' not recommended in node name arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts: /bus@100000/pinctrl@11c000/main_usbss0_pins_default: Character '_' not recommended in node name -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Hi, This is repost of Faiz's patches adding higher speed modes for J721E, originally posted here:' https://lore.kernel.org/lkml/20201001190541.6364-1-faiz_abbas@ti.com/ Dependencies are resolved now, and patches rebased to latest linux-next. v2: - rebased to latest linux-next - fixed dtbs_check warning caused by improper states property in gpio regulator introduced in patch 2/2. Faiz Abbas (2): arm64: dts: ti: k3-j721e-main: Add output tap delay values arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS modes .../dts/ti/k3-j721e-common-proc-board.dts | 35 ++++++++++++++++++- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 22 +++++++++--- 2 files changed, 51 insertions(+), 6 deletions(-)