mbox series

[RFC,v2,net-next,0/4] MT7530 interrupt support

Message ID 20210407045038.1436843-1-dqfext@gmail.com
Headers show
Series MT7530 interrupt support | expand

Message

Qingfang Deng April 7, 2021, 4:50 a.m. UTC 
Add support for MT7530 interrupt controller.

DENG Qingfang (4):
  net: phy: add MediaTek PHY driver
  net: dsa: mt7530: add interrupt support
  dt-bindings: net: dsa: add MT7530 interrupt controller binding
  staging: mt7621-dts: enable MT7530 interrupt controller

 .../devicetree/bindings/net/dsa/mt7530.txt    |   5 +
 drivers/net/dsa/mt7530.c                      | 203 ++++++++++++++++--
 drivers/net/dsa/mt7530.h                      |  18 +-
 drivers/net/phy/Kconfig                       |   5 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/mediatek.c                    | 109 ++++++++++
 drivers/staging/mt7621-dts/mt7621.dtsi        |   3 +
 7 files changed, 323 insertions(+), 21 deletions(-)
 create mode 100644 drivers/net/phy/mediatek.c

Comments

Andrew Lunn April 7, 2021, 11:14 p.m. UTC | #1 
On Wed, Apr 07, 2021 at 12:50:35PM +0800, DENG Qingfang wrote:
> Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
> The initialization procedure is from the vendor driver, but due to lack
> of documentation, the function of some register values remains unknown.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew