mbox series

[v2,0/4] clk: qcom: add SM8450 Display clock controller support

Message ID 20220908191044.3538823-1-dmitry.baryshkov@linaro.org
Headers show
Series clk: qcom: add SM8450 Display clock controller support | expand

Message

Dmitry Baryshkov Sept. 8, 2022, 7:10 p.m. UTC 
Add support for the Display clock controller found on SM8450 platform.

Changes since v1:
 - Rebased on top of 6.0-rc
 - Dropped clk-names in favour of using parent indices (Bjorn)
 - Added GCC_DISP_AHB_CLK to dispcc node (Bjorn)
 - Changed bindings licence to dual GPL+BSD (Bjorn)
 - Removed zero clocks in dt bindings
 - Fixed syntax issues

Dmitry Baryshkov (4):
  dt-bindings: clock: qcom: add bindings for dispcc on SM8450
  clk: qcom: alpha-pll: add support for power off mode for lucid evo PLL
  clk: qcom: Add support for Display Clock Controller on SM8450
  arm64: dts: qcom: sm8450: add display clock controller

 .../bindings/clock/qcom,sm8450-dispcc.yaml    |   97 +
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |   28 +
 drivers/clk/qcom/Kconfig                      |    9 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |   40 +-
 drivers/clk/qcom/clk-alpha-pll.h              |    1 +
 drivers/clk/qcom/dispcc-sm8450.c              | 1829 +++++++++++++++++
 .../dt-bindings/clock/qcom,sm8450-dispcc.h    |  103 +
 8 files changed, 2105 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
 create mode 100644 drivers/clk/qcom/dispcc-sm8450.c
 create mode 100644 include/dt-bindings/clock/qcom,sm8450-dispcc.h