mbox series

[net-next,v2,0/6] tsnep: multi queue support and some other improvements

Message ID 20220923202246.118926-1-gerhard@engleder-embedded.com
Headers show
Series tsnep: multi queue support and some other improvements | expand

Message

Gerhard Engleder Sept. 23, 2022, 8:22 p.m. UTC 
Add support for additional TX/RX queues along with RX flow classification
support.

Binding is extended to allow additional interrupts for additional TX/RX
queues. Also dma-coherent is allowed as minor improvement.

RX path optimisation is done by using page pool as preparations for future
XDP support.

Gerhard Engleder (6):
  dt-bindings: net: tsnep: Allow dma-coherent
  dt-bindings: net: tsnep: Allow additional interrupts
  tsnep: Move interrupt from device to queue
  tsnep: Support multiple TX/RX queue pairs
  tsnep: Add EtherType RX flow classification support
  tsnep: Use page pool for RX

 .../bindings/net/engleder,tsnep.yaml          |  39 +-
 drivers/net/ethernet/engleder/Kconfig         |   1 +
 drivers/net/ethernet/engleder/Makefile        |   2 +-
 drivers/net/ethernet/engleder/tsnep.h         |  47 ++-
 drivers/net/ethernet/engleder/tsnep_ethtool.c |  38 ++
 drivers/net/ethernet/engleder/tsnep_hw.h      |  13 +-
 drivers/net/ethernet/engleder/tsnep_main.c    | 356 +++++++++++++-----
 drivers/net/ethernet/engleder/tsnep_rxnfc.c   | 281 ++++++++++++++
 8 files changed, 662 insertions(+), 115 deletions(-)
 create mode 100644 drivers/net/ethernet/engleder/tsnep_rxnfc.c