mbox series

[v2,0/2] add device Xiaomi Mi 6 sagit and board binding

Message ID 20220928103319.621698-1-dsankouski@gmail.com
Headers show
Series add device Xiaomi Mi 6 sagit and board binding | expand

Message

Dzmitry Sankouski Sept. 28, 2022, 10:33 a.m. UTC 
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
To: linux-kernel@vger.kernel.org
CC: Andy Gross <agross@kernel.org> (maintainer:ARM/QUALCOMM SUPPORT)
CC: Bjorn Andersson <bjorn.andersson@linaro.org> (maintainer:ARM/QUALCOMM SUPPORT)
CC: Konrad Dybcio <konrad.dybcio@somainline.org> (reviewer:ARM/QUALCOMM SUPPORT)
CC: Rob Herring <robh+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
CC: linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT)
CC: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

Dzmitry Sankouski (2):
  arm64: dts: qcom: sagit: add initial device tree for sagit
  dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8998-xiaomi-sagit.dts    | 682 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |   6 +
 4 files changed, 691 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts