mbox series

[v4,0/4] Add support for Toshiba TC358746

Message ID 20220930124812.450332-1-m.felsch@pengutronix.de
Headers show
Series Add support for Toshiba TC358746 | expand

Message

Marco Felsch Sept. 30, 2022, 12:48 p.m. UTC 
Hi,

this small series adds the support for the Toshiba TC358746 MIPI-CSI to
Parallel converter chip. The different versions of this serie can be
found here [1]. Thanks a lot for the review feedback from Laurent and
Sakari, which was very helpful.

[1] https://lore.kernel.org/all/20220922134843.3108267-1-m.felsch@pengutronix.de/
    https://lore.kernel.org/all/20220916134535.128131-1-m.felsch@pengutronix.de/
    https://lore.kernel.org/all/20220818143307.967150-5-m.felsch@pengutronix.de/

Marco Felsch (4):
  phy: dphy: refactor get_default_config
  phy: dphy: add support to calculate the timing based on hs_clk_rate
  media: dt-bindings: add bindings for Toshiba TC358746
  media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver

 .../bindings/media/i2c/toshiba,tc358746.yaml  |  178 ++
 drivers/media/i2c/Kconfig                     |   17 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/tc358746.c                  | 1696 +++++++++++++++++
 drivers/phy/phy-core-mipi-dphy.c              |   31 +-
 include/linux/phy/phy-mipi-dphy.h             |    3 +
 6 files changed, 1922 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
 create mode 100644 drivers/media/i2c/tc358746.c