mbox series

[v1,0/5] arm64: dts: freescale: prepare and add apalis imx8 support

Message ID 20221226062824.53113-1-marcel@ziswiler.com
Headers show
Series arm64: dts: freescale: prepare and add apalis imx8 support | expand

Message

Marcel Ziswiler Dec. 26, 2022, 6:28 a.m. UTC 
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


Add support for lsio_pwm0-3, add io-channel-cells property for ADC
nodes, set lpspi0 max frequency to 60MHz, add toradex,apalis-imx8 et al.
to dt-bindings and finally, add initial support for Apalis iMX8.


Marcel Ziswiler (2):
  dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
  arm64: dts: freescale: add initial support for apalis imx8 aka quadmax

Max Krummenacher (1):
  arm64: dts: fsl-imx8qm-device.dtsi: add io-channel-cells to adc nodes

Philippe Schenker (2):
  arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3
  arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz

 .../devicetree/bindings/arm/fsl.yaml          |   12 +
 arch/arm64/boot/dts/freescale/Makefile        |    5 +
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  146 ++
 .../dts/freescale/imx8-apalis-ixora-v1.1.dtsi |  214 +++
 .../dts/freescale/imx8-apalis-ixora-v1.2.dtsi |  264 +++
 .../boot/dts/freescale/imx8-apalis-v1.1.dtsi  | 1510 +++++++++++++++++
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi |    4 +-
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      |   48 +
 .../boot/dts/freescale/imx8qm-apalis-eval.dts |   16 +
 .../freescale/imx8qm-apalis-ixora-v1.1.dts    |   16 +
 .../dts/freescale/imx8qm-apalis-v1.1-eval.dts |   16 +
 .../imx8qm-apalis-v1.1-ixora-v1.1.dts         |   16 +
 .../imx8qm-apalis-v1.1-ixora-v1.2.dts         |   16 +
 .../dts/freescale/imx8qm-apalis-v1.1.dtsi     |   17 +
 .../boot/dts/freescale/imx8qm-apalis.dtsi     |  342 ++++
 15 files changed, 2641 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi

Comments

Rob Herring (Arm) Dec. 26, 2022, 9:59 p.m. UTC | #1 
On Mon, 26 Dec 2022 07:28:22 +0100, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> Add toradex,apalis-imx8 for the Apalis iMX8 aka QuadMax modules and the
> carrier boards (Apalis Evaluation board as well as Ixora V1.1 and V1.2)
> they may be mated in.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> ---
> 
>  Documentation/devicetree/bindings/arm/fsl.yaml | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>