[v8,0/9] Add minimal MT8365 and MT8365-EVK support

v8:
  - Add binding descriptions for mediatek,mt8365-systimer and
    mediatek,mt8365-uart
  - Specify ranges with parameters for u3phy

v7:
  - Update GIC information in mt8365.dtsi (thanks to Marc Zyngier for
    pointing out the problem)
  - Adjust the timer to match the updated GIC information

v6:
  - Add systimer in mt8365.dtsi
  - Add I/D caches and L2 cache details in mt8365.dtsi
  - Move bl31_secmon_reserved from mt8365.dtsi to mt8365-evk.dts
  - Fix inconsistent indentation in mt8365-pinctrl example
  - Further mt8365.dtsi cleanups
  - Submit to additional maintainers spotted by get_maintainer.pl

v5:
  - Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
    example-schema
  - Use consistent quotes

v4:
  - Remove pins-are-numbered references that have been holding things up
    now that the patches removing it from dt-bindings have landed in linux-next

v3:
  - Remove a number of components that are not yet supported (they will
    come back alongside the corresponding drivers)
  - Address issues found by dt_binding_check (mostly fixing pinctrl
    bindings)
  - Address issues pointed out in comments
  - Reorder patches

v2:
  - Add missing dt-bindings documentation
  - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski


Bernhard Rosenkränzer (6):
  dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
  dt-bindings: irq: mtk, sysirq: add support for mt8365
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC
  dt-bindings: timer: mediatek,mtk-timer: add MT8365 SoC bindings
  dt-bindings: serial: mediatek,uart: add MT8365 SoC bindings

Fabien Parent (3):
  dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  arm64: dts: mediatek: Initial mt8365-evk support

 .../devicetree/bindings/arm/mediatek.yaml     |   4 +
 .../interrupt-controller/mediatek,sysirq.txt  |   1 +
 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 .../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 +++++++++
 .../bindings/serial/mediatek,uart.yaml        |   1 +
 .../bindings/timer/mediatek,mtk-timer.txt     |   1 +
 .../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
 .../bindings/usb/mediatek,mtu3.yaml           |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 169 ++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 378 ++++++++++++++++++
 11 files changed, 755 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

Il 23/01/23 17:38, Bernhard Rosenkränzer ha scritto:
> From: Fabien Parent <fparent@baylibre.com>
> 
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>   arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 169 +++++++++
>   arch/arm64/boot/dts/mediatek/mt8365.dtsi    | 378 ++++++++++++++++++++
>   3 files changed, 548 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
> 

..snip..

> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 0000000000000..04c666cab506a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * (C) 2018 MediaTek Inc.
> + * Copyright (C) 2022 BayLibre SAS
> + * Fabien Parent <fparent@baylibre.com>
> + * Bernhard Rosenkränzer <bero@baylibre.com>
> + */
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>

thermal.h is unused... please remove it for now and add it back in a commit
where you add the thermal node.

Otherwise,

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>