| Message ID | 20230411200409.455355-1-ahalaney@redhat.com |
|---|---|
| Headers | show |
| Series | Add EMAC3 support for sa8540p-ride | expand |
On Tue, Apr 11, 2023 at 03:03:57PM -0500, Andrew Halaney wrote: > This is a forward port / upstream refactor of code delivered > downstream by Qualcomm over at [0] to enable the DWMAC5 based > implementation called EMAC3 on the sa8540p-ride dev board. > > From what I can tell with the board schematic in hand, > as well as the code delivered, the main changes needed are: > > 1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs > 2. A new programming sequence required for the EMAC3 based platforms > > This series makes the changes above as well as other housekeeping items > such as converting dt-bindings to yaml, etc. > > As requested[1], it has been split up by compilation deps / maintainer tree. > I will post a link to the associated devicetree changes that together > with this series get the hardware functioning. > > Patches 1-3 are clean ups of the currently supported dt-bindings and > IMO could be picked up as is independent of the rest of the series to > improve the current codebase. They've all been reviewed in prior > versions of the series. > > Patches 5-7 are also clean ups of the driver and are worth picking up > independently as well. They don't all have explicit reviews but should > be good to go (trivial changes on non-reviewed bits). > > The rest of the patches have new changes, lack review, or are specificly > being made to support the new hardware, so they should wait until the > series as a whole is deemed ready to go by the community. Looks good to me! Tested-by: Brian Masney <bmasney@redhat.com>
Hello: This series was applied to netdev/net-next.git (main) by Paolo Abeni <pabeni@redhat.com>: On Tue, 11 Apr 2023 15:03:57 -0500 you wrote: > This is a forward port / upstream refactor of code delivered > downstream by Qualcomm over at [0] to enable the DWMAC5 based > implementation called EMAC3 on the sa8540p-ride dev board. > > From what I can tell with the board schematic in hand, > as well as the code delivered, the main changes needed are: > > [...] Here is the summary with links: - [net-next,v4,01/12] dt-bindings: net: snps,dwmac: Update interrupt-names https://git.kernel.org/netdev/net-next/c/d554ba0ea03c - [net-next,v4,02/12] dt-bindings: net: snps,dwmac: Add Qualcomm Ethernet ETHQOS compatibles https://git.kernel.org/netdev/net-next/c/d70c215bdd17 - [net-next,v4,03/12] dt-bindings: net: qcom,ethqos: Convert bindings to yaml https://git.kernel.org/netdev/net-next/c/02e98ce3db14 - [net-next,v4,04/12] dt-bindings: net: qcom,ethqos: Add Qualcomm sc8280xp compatibles https://git.kernel.org/netdev/net-next/c/25926a703ec1 - [net-next,v4,05/12] net: stmmac: Remove unnecessary if statement brackets https://git.kernel.org/netdev/net-next/c/7c6b942b81ca - [net-next,v4,06/12] net: stmmac: Fix DMA typo https://git.kernel.org/netdev/net-next/c/d638dcb52b09 - [net-next,v4,07/12] net: stmmac: Remove some unnecessary void pointers https://git.kernel.org/netdev/net-next/c/0c3f3c4f4b15 - [net-next,v4,08/12] net: stmmac: Pass stmmac_priv in some callbacks https://git.kernel.org/netdev/net-next/c/1d84b487bc2d - [net-next,v4,09/12] net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsets https://git.kernel.org/netdev/net-next/c/33719b57f52e - [net-next,v4,10/12] net: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delay https://git.kernel.org/netdev/net-next/c/164a9ebe9742 - [net-next,v4,11/12] net: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speeds https://git.kernel.org/netdev/net-next/c/030f1d5972aa - [net-next,v4,12/12] net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support https://git.kernel.org/netdev/net-next/c/b68376191c69 You are awesome, thank you!