mbox series

[v10,00/12] dmaengine: edma: add freescale edma v3 support

Message ID 20230707190029.476005-1-Frank.Li@nxp.com
Headers show
Series dmaengine: edma: add freescale edma v3 support | expand

Message

Frank Li July 7, 2023, 7 p.m. UTC
This patch series introduces support for the eDMA version 3 from
Freescale. The eDMA v3 brings alterations in the register layout,
particularly, the separation of channel control registers into
different channels. The Transfer Control Descriptor (TCD) layout,
however, remains identical with only the offset being changed.

The first 11 patches aim at tidying up the existing Freescale
eDMA code and laying the groundwork for the integration of eDMA v3
support.

Patch 1-11:
These patches primarily focus on cleaning up and refactoring the existing
fsl_edma driver code. This is to accommodate the upcoming changes and new
features introduced with the eDMA v3.

Patch 12:
This patch introduces support for eDMA v3. In addition, this patch has
been designed with an eye towards future upgradability, specifically for
transitioning to eDMA v5. The latter involves a significant upgrade
where the TCD address would need to support 64 bits.

Patch 13:
This patch focuses on the device tree bindings and their modifications
to properly handle and integrate the changes brought about by eDMA v3

Change from v9 to v10
- use HAS_IOMEM
- move dt-bind before enable v3
- remove a unused code
- drop patch3 clean up fsl_edma_irq_exit()

Change from v8 to v9
- add dmaengine: fsl-edma: fix build error when arch is s390
  fix kernel test robot build issue

Change from v7 to v8
-dt-bind: add missed part

clock-names:
> items:
>   - const: dma
> 
> clocks:
>   maxItems: 1

Change from v6 to v7
-dt-bind: remove "else" branch. 

Change from v5 to v6
- dt-bind: rework it by fixed top level constraint.

Change from v4 to v5
- dt-bind, add example for imx93 to trigger make dt_binding_check to
generate the yaml error. fixed dt_binding_check error. 
  keep compatible string ordered alphabetically.

Change from v3 to v4.
- use dma-channel-mask instead of fsl,channel-mask
- don't use dmamux after v3. only use flags to distinguish the IP
difference
- fixed 8qm and imx93 have not CH_MUX register. Previous can work
because dmamux is 0.

Change from v2 to v3
- dt-binding: add interrupt-names
- dt-binding: add minItems
- dt-binding: add missed property: fsl,channel-mask
- rework patch 4, removed edma_version to avoid confuse with hardware
IP version.

Change from v1 to v2
- fixed issue found by make DT_CHECKER_FLAGS=-m dt_binding_check
- fixed warning found by kernel test robot


Frank Li (13):
1   dmaengine: fsl-edma: fix build error when arch is s390
2   dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
3[dropped]   dmaengine: fsl-edma: clean up fsl_edma_irq_exit()
4   dmaengine: fsl-edma: transition from bool fields to bitmask flags in
    drvdata
5   dmaengine: fsl-edma: Remove enum edma_version
6   dmaengine: fsl-edma: move common IRQ handler to common.c
7   dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
8   dmaengine: fsl-edma: refactor using devm_clk_get_enabled
9   dmaengine: fsl-edma: move clearing of register interrupt into
    setup_irq function
10  dmaengine: fsl-edma: refactor chan_name setup and safety
11  dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
12  dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
13  dmaengine: fsl-edma: integrate v3 support

 .../devicetree/bindings/dma/fsl,edma.yaml     | 106 +++++-
 drivers/dma/Kconfig                           |   2 +-
 drivers/dma/Makefile                          |   6 +-
 drivers/dma/fsl-edma-common.c                 | 308 +++++++++++------
 drivers/dma/fsl-edma-common.h                 | 127 +++++--
 drivers/dma/{fsl-edma.c => fsl-edma-main.c}   | 320 ++++++++++++++----
 drivers/dma/{mcf-edma.c => mcf-edma-main.c}   |  36 +-
 7 files changed, 677 insertions(+), 228 deletions(-)
 rename drivers/dma/{fsl-edma.c => fsl-edma-main.c} (62%)
 rename drivers/dma/{mcf-edma.c => mcf-edma-main.c} (90%)

Comments

Vinod Koul Aug. 22, 2023, 2:42 p.m. UTC | #1
On Fri, 07 Jul 2023 15:00:17 -0400, Frank Li wrote:
> This patch series introduces support for the eDMA version 3 from
> Freescale. The eDMA v3 brings alterations in the register layout,
> particularly, the separation of channel control registers into
> different channels. The Transfer Control Descriptor (TCD) layout,
> however, remains identical with only the offset being changed.
> 
> The first 11 patches aim at tidying up the existing Freescale
> eDMA code and laying the groundwork for the integration of eDMA v3
> support.
> 
> [...]

Applied, thanks!

[01/12] dmaengine: fsl-edma: fix build error when arch is s390
        commit: 8b9aee8073a5f3e0c2e418d45a7969270ea576c6
[02/12] dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
        commit: 66aac8ea0a6c79729f99087b1c5a596938e5d838
[03/12] dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
        commit: 9e006b243962a42f6927d2d9fe1a7b0a29f45265
[04/12] dmaengine: fsl-edma: Remove enum edma_version
        commit: c26e611433aaa064691343c0168f4671eb5cfa42
[05/12] dmaengine: fsl-edma: move common IRQ handler to common.c
        commit: 79434f9b97361601e65e0f5576e9760fefebf19a
[06/12] dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
        commit: ee2dda06465a3b0f533c829a5bdc2ff15588d8e0
[07/12] dmaengine: fsl-edma: refactor using devm_clk_get_enabled
        commit: a9903de3aa16731846bf924342eca44bdabe9be6
[08/12] dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
        commit: f5b3ba52f36adcda7801fba99c414975f19c85d4
[09/12] dmaengine: fsl-edma: refactor chan_name setup and safety
        commit: 9b05554c5ca6829a60c610191d45f244d8726e95
[10/12] dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
        commit: 7536f8b371adcc1c4f7ed7ca579da24bdeb14b6f
[11/12] dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
        commit: 6eb439dff645a1f61a710abfc0d37a50e4d43d1a
[12/12] dmaengine: fsl-edma: integrate v3 support
        commit: 72f5801a4e2b7122ed8ff5672ea965a0b3458e6b

Best regards,