mbox series

[0/9] Enable USB3 for IPQ5332

Message ID 20230829135818.2219438-1-quic_ipkumar@quicinc.com
Headers show
Series Enable USB3 for IPQ5332 | expand

Message

Praveenkumar I Aug. 29, 2023, 1:58 p.m. UTC 
IPQ5332 has UNIPHY for USB and PCIe which is similar to the UNIPHY
present in IPQ4019. Few extra settings like clock, reset delay, mux
selection and voltage regulator are required for IPQ5332. Hence
repurposed the IPQ4019 PHY driver for IPQ5332 UNIPHY. Few more Qualcomm
SoCs are also having the UNIPHY which can use the same driver for both
USB and PCIe PHY.

Praveenkumar I (9):
  dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
  phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver
  phy: qcom: uniphy: Update UNIPHY driver to be a common driver
  dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
  dt-bindings: usb: dwc3: Update IPQ5332 compatible
  arm64: dts: qcom: ipq5332: Add USB3 related nodes
  arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY
  phy: qcom: uniphy: Add ipq5332 USB UNIPHY support
  arm64: defconfig: Enable UNIPHY driver

 .../devicetree/bindings/phy/qcom,uniphy.yaml  | 168 +++++++
 .../bindings/phy/qcom-usb-ipq4019-phy.yaml    |  52 --
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  20 +-
 MAINTAINERS                                   |   7 +-
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts   |   7 +-
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         |  39 +-
 arch/arm64/configs/defconfig                  |   1 +
 drivers/phy/qualcomm/Kconfig                  |   7 +-
 drivers/phy/qualcomm/Makefile                 |   2 +-
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c   | 145 ------
 drivers/phy/qualcomm/phy-qcom-uniphy.c        | 451 ++++++++++++++++++
 11 files changed, 686 insertions(+), 213 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
 delete mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy.c

Comments

Praveenkumar I Aug. 31, 2023, 12:15 p.m. UTC | #1 
On 8/29/2023 10:37 PM, Krzysztof Kozlowski wrote:
> On 29/08/2023 15:58, Praveenkumar I wrote:
>> IPQ5332 has UNIPHY for USB and PCIe which is similar to the UNIPHY
>> present in IPQ4019. Few extra settings like clock, reset delay, mux
>> selection and voltage regulator are required for IPQ5332. Hence
>> repurposed the IPQ4019 PHY driver for IPQ5332 UNIPHY. Few more Qualcomm
>> SoCs are also having the UNIPHY which can use the same driver for both
>> USB and PCIe PHY.
>>
>> Praveenkumar I (9):
>>    dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
>>    phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver
>>    phy: qcom: uniphy: Update UNIPHY driver to be a common driver
>>    dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
>>    dt-bindings: usb: dwc3: Update IPQ5332 compatible
>>    arm64: dts: qcom: ipq5332: Add USB3 related nodes
>>    arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY
> DTS does not go before drivers. DTS should be sent separately or as the
> last patches. If you stuff it in the middle, means your patchset has
> dependencies which it cannot have. Thus it is broken.
Sorry, I ordered it wrongly. Will correct in the next patches.

- Praveenkumar
>
> Best regards,
> Krzysztof
>