mbox series

[v1,0/2] Add JH8100 external interrupt controller support

Message ID 20240111023201.6187-1-changhuang.liang@starfivetech.com
Headers show
Series Add JH8100 external interrupt controller support | expand

Message

Changhuang Liang Jan. 11, 2024, 2:31 a.m. UTC
This patchset adds external interrupt controller driver for the StarFive
JH81000 SoC. It can be used to handle high-level input interrupt signals.
It also send the output interrupt signal to RISC-V PLIC.

Changhuang Liang (2):
  dt-bindings: interrupt-controller: Add starfive,jh8100-intc
  irqchip: Add StarFive external interrupt controller

 .../starfive,jh8100-intc.yaml                 |  61 ++++++
 MAINTAINERS                                   |   6 +
 drivers/irqchip/Kconfig                       |  11 ++
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-starfive-jh8100-intc.c    | 180 ++++++++++++++++++
 5 files changed, 259 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
 create mode 100644 drivers/irqchip/irq-starfive-jh8100-intc.c

--
2.25.1