diff mbox series

[5/9] firmware: arm_scmi: add initial support for performance protocol

Message ID 1498492513-29771-6-git-send-email-sudeep.holla@arm.com
State New
Headers show
Series firmware: ARM System Control and Management Interface(SCMI) support | expand

Commit Message

Sudeep Holla June 26, 2017, 3:55 p.m. UTC
The performance protocol is intended for the performance management of
group(s) of device(s) that run in the same performance domain. It
includes even the CPUs. A performance domain is defined by a set of
devices that always have to run at the same performance level.
For example, a set of CPUs that share a voltage domain, and have a
common frequency control, is said to be in the same performance domain.

The commands in this protocol provide functionality to describe the
protocol version, describe various attribute flags, set and get the
performance level of a domain. It also supports discovery of the list
of performance levels supported by a performance domain, and the
properties of each performance level.

This patch adds basic support for the performance protocol.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

---
 drivers/firmware/arm_scmi/Makefile |   2 +-
 drivers/firmware/arm_scmi/common.h |   1 +
 drivers/firmware/arm_scmi/perf.c   | 511 +++++++++++++++++++++++++++++++++++++
 include/linux/scmi_protocol.h      |  31 +++
 4 files changed, 544 insertions(+), 1 deletion(-)
 create mode 100644 drivers/firmware/arm_scmi/perf.c

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 21d01d1d6b9c..159de726ee45 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,2 +1,2 @@ 
 obj-$(CONFIG_ARM_SCMI_PROTOCOL)	= arm_scmi.o
-arm_scmi-y = base.o driver.o
+arm_scmi-y = base.o driver.o perf.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index e3fe5d9acc82..7473dfcad4ee 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -30,6 +30,7 @@ 
 #define PROTOCOL_REV_MAJOR(x)	((x) >> PROTOCOL_REV_MINOR_BITS)
 #define PROTOCOL_REV_MINOR(x)	((x) & PROTOCOL_REV_MINOR_MASK)
 #define MAX_PROTOCOLS_IMP	16
+#define MAX_OPPS		16
 
 enum scmi_std_protocol {
 	SCMI_PROTOCOL_BASE = 0x10,
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
new file mode 100644
index 000000000000..1cb4ba705094
--- /dev/null
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -0,0 +1,511 @@ 
+/*
+ * System Control and Management Interface (SCMI) Performance Protocol
+ *
+ * Copyright (C) 2017 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/sort.h>
+
+#include "common.h"
+
+enum scmi_performance_protocol_cmd {
+	PERF_DOMAIN_ATTRIBUTES = 0x3,
+	PERF_DESCRIBE_LEVELS = 0x4,
+	PERF_LIMITS_SET = 0x5,
+	PERF_LIMITS_GET = 0x6,
+	PERF_LEVEL_SET = 0x7,
+	PERF_LEVEL_GET = 0x8,
+	PERF_NOTIFY_LIMITS = 0x9,
+	PERF_NOTIFY_LEVEL = 0xa,
+};
+
+struct scmi_opp {
+	u32 perf;
+	u32 power;
+	u32 trans_latency_us;
+};
+
+struct scmi_msg_resp_perf_attributes {
+	__le16 num_domains;
+	__le16 flags;
+#define POWER_SCALE_IN_MILLIWATT(x)	((x) & BIT(0))
+	__le32 stats_addr_low;
+	__le32 stats_addr_high;
+	__le32 stats_size;
+};
+
+struct scmi_msg_resp_perf_domain_attributes {
+	__le32 flags;
+#define SUPPORTS_SET_LIMITS(x)		((x) & BIT(31))
+#define SUPPORTS_SET_PERF_LVL(x)	((x) & BIT(30))
+#define SUPPORTS_PERF_LIMIT_NOTIFY(x)	((x) & BIT(29))
+#define SUPPORTS_PERF_LEVEL_NOTIFY(x)	((x) & BIT(28))
+	__le32 rate_limit_us;
+	__le32 sustained_freq_khz;
+	__le32 sustained_perf_level;
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_msg_perf_describe_levels {
+	__le32 domain;
+	__le32 level_index;
+};
+
+struct scmi_perf_set_limits {
+	__le32 domain;
+	__le32 max_level;
+	__le32 min_level;
+};
+
+struct scmi_perf_get_limits {
+	__le32 max_level;
+	__le32 min_level;
+};
+
+struct scmi_perf_set_level {
+	__le32 domain;
+	__le32 level;
+};
+
+struct scmi_perf_notify_level_or_limits {
+	__le32 domain;
+	__le32 notify_enable;
+};
+
+struct scmi_msg_resp_perf_describe_levels {
+	__le16 num_returned;
+	__le16 num_remaining;
+	struct {
+		__le32 perf_val;
+		__le32 power;
+		__le16 transition_latency_us;
+		__le16 reserved;
+	} opp[0];
+};
+
+struct perf_dom_info {
+	bool set_limits;
+	bool set_perf;
+	bool perf_limit_notify;
+	bool perf_level_notify;
+	u32 opp_count;
+	u32 sustained_freq_khz;
+	u32 sustained_perf_level;
+	u32 mult_factor;
+	char name[SCMI_MAX_STR_SIZE];
+	struct scmi_opp opp[MAX_OPPS];
+};
+
+struct scmi_perf_info {
+	int num_domains;
+	bool power_scale_mw;
+	u64 stats_addr;
+	u32 stats_size;
+	struct perf_dom_info *dom_info;
+};
+
+static struct scmi_perf_info perf_info;
+
+static int scmi_perf_attributes_get(const struct scmi_handle *handle,
+				    struct scmi_perf_info *perf_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_perf_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_PERF, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u16 flags = le16_to_cpu(attr->flags);
+
+		perf_info->num_domains = le16_to_cpu(attr->num_domains);
+		perf_info->power_scale_mw = POWER_SCALE_IN_MILLIWATT(flags);
+		perf_info->stats_addr = le32_to_cpu(attr->stats_addr_low) |
+				(u64)le32_to_cpu(attr->stats_addr_high) << 32;
+		perf_info->stats_size = le32_to_cpu(attr->stats_size);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+				struct perf_dom_info *dom_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_perf_domain_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, PERF_DOMAIN_ATTRIBUTES,
+				 SCMI_PROTOCOL_PERF, sizeof(domain),
+				 sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u32 flags = le32_to_cpu(attr->flags);
+
+		dom_info->set_limits = SUPPORTS_SET_LIMITS(flags);
+		dom_info->set_perf = SUPPORTS_SET_PERF_LVL(flags);
+		dom_info->perf_limit_notify = SUPPORTS_PERF_LIMIT_NOTIFY(flags);
+		dom_info->perf_level_notify = SUPPORTS_PERF_LEVEL_NOTIFY(flags);
+		dom_info->sustained_freq_khz =
+					le32_to_cpu(attr->sustained_freq_khz);
+		dom_info->sustained_perf_level =
+					le32_to_cpu(attr->sustained_perf_level);
+		dom_info->mult_factor =	(dom_info->sustained_freq_khz * 1000) /
+					dom_info->sustained_perf_level;
+		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int opp_cmp_func(const void *opp1, const void *opp2)
+{
+	const struct scmi_opp *t1 = opp1, *t2 = opp2;
+
+	return t1->perf - t2->perf;
+}
+
+static int
+scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain,
+			      struct perf_dom_info *perf_dom)
+{
+	int ret, cnt;
+	u32 tot_opp_cnt = 0;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_opp *opp;
+	struct scmi_msg_perf_describe_levels *dom_info;
+	struct scmi_msg_resp_perf_describe_levels *level_info;
+
+	ret = scmi_one_xfer_init(handle, PERF_DESCRIBE_LEVELS,
+				 SCMI_PROTOCOL_PERF, sizeof(*dom_info), 0, &t);
+	if (ret)
+		return ret;
+
+	dom_info = t->tx.buf;
+	level_info = t->rx.buf;
+
+	do {
+		dom_info->domain = cpu_to_le32(domain);
+		/* Set the number of OPPs to be skipped/already read */
+		dom_info->level_index = cpu_to_le32(tot_opp_cnt);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		num_returned = le16_to_cpu(level_info->num_returned);
+		num_remaining = le16_to_cpu(level_info->num_remaining);
+		if (tot_opp_cnt + num_returned > MAX_OPPS) {
+			dev_err(handle->dev, "No. of OPPs exceeded MAX_OPPS");
+			break;
+		}
+
+		opp = &perf_dom->opp[tot_opp_cnt];
+		for (cnt = 0; cnt < num_returned; cnt++, opp++) {
+			opp->perf = le32_to_cpu(level_info->opp[cnt].perf_val);
+			opp->power = le32_to_cpu(level_info->opp[cnt].power);
+			opp->trans_latency_us = le16_to_cpu(
+				level_info->opp[cnt].transition_latency_us);
+
+			dev_dbg(handle->dev, "Level %d Power %d Latency %dus\n",
+				opp->perf, opp->power, opp->trans_latency_us);
+		}
+
+		tot_opp_cnt += num_returned;
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	perf_dom->opp_count = tot_opp_cnt;
+	scmi_one_xfer_put(handle, t);
+
+	sort(perf_dom->opp, tot_opp_cnt, sizeof(*opp), opp_cmp_func, NULL);
+	return ret;
+}
+
+static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
+				u32 max_perf, u32 min_perf)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_set_limits *limits;
+
+	ret = scmi_one_xfer_init(handle, PERF_LIMITS_SET, SCMI_PROTOCOL_PERF,
+				 sizeof(*limits), 0, &t);
+	if (ret)
+		return ret;
+
+	limits = t->tx.buf;
+	limits->domain = cpu_to_le32(domain);
+	limits->max_level = cpu_to_le32(max_perf);
+	limits->min_level = cpu_to_le32(min_perf);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
+				u32 *max_perf, u32 *min_perf)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_get_limits *limits;
+
+	ret = scmi_one_xfer_init(handle, PERF_LIMITS_GET, SCMI_PROTOCOL_PERF,
+				 sizeof(__le32), 0, &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		limits = t->rx.buf;
+
+		*max_perf = le32_to_cpu(limits->max_level);
+		*min_perf = le32_to_cpu(limits->min_level);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_perf_level_set(const struct scmi_handle *handle, u32 domain, u32 level)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_set_level *lvl;
+
+	ret = scmi_one_xfer_init(handle, PERF_LEVEL_SET, SCMI_PROTOCOL_PERF,
+				 sizeof(*lvl), 0, &t);
+	if (ret)
+		return ret;
+
+	lvl = t->tx.buf;
+	lvl->domain = cpu_to_le32(domain);
+	lvl->level = cpu_to_le32(level);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_perf_level_get(const struct scmi_handle *handle, u32 domain, u32 *level)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_one_xfer_init(handle, PERF_LEVEL_GET, SCMI_PROTOCOL_PERF,
+				 sizeof(u32), sizeof(u32), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		*level = le32_to_cpu(*(__le32 *)t->rx.buf);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int __scmi_perf_notify_enable(const struct scmi_handle *handle, u32 cmd,
+				     u32 domain, bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_notify_level_or_limits *notify;
+
+	ret = scmi_one_xfer_init(handle, cmd, SCMI_PROTOCOL_PERF,
+				 sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->domain = cpu_to_le32(domain);
+	notify->notify_enable = cpu_to_le32(enable & BIT(0));
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_limits_notify_enable(const struct scmi_handle *handle,
+					  u32 domain, bool enable)
+{
+	return __scmi_perf_notify_enable(handle, PERF_NOTIFY_LIMITS,
+					 domain, enable);
+}
+
+static int scmi_perf_level_notify_enable(const struct scmi_handle *handle,
+					 u32 domain, bool enable)
+{
+	return __scmi_perf_notify_enable(handle, PERF_NOTIFY_LEVEL,
+					 domain, enable);
+}
+
+/* Device specific ops */
+static int scmi_dev_domain_id(struct device *dev)
+{
+	struct of_phandle_args clkspec;
+
+	if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells",
+				       0, &clkspec))
+		return -EINVAL;
+
+	return clkspec.args[0];
+}
+
+static int scmi_dvfs_add_opps_to_device(struct device *dev)
+{
+	int idx, ret, domain;
+	unsigned long freq;
+	struct scmi_opp *opp;
+	struct perf_dom_info *dom;
+
+	domain = scmi_dev_domain_id(dev);
+	if (domain < 0)
+		return domain;
+
+	dom = perf_info.dom_info + domain;
+	if (!dom)
+		return -EIO;
+
+	for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
+		freq = opp->perf * dom->mult_factor;
+
+		ret = dev_pm_opp_add(dev, freq, opp->power);
+		if (ret) {
+			dev_warn(dev, "failed to add opp %luHz %umV\n",
+				 freq, opp->power);
+
+			while (idx-- > 0) {
+				freq = (--opp)->perf * dom->mult_factor;
+				dev_pm_opp_remove(dev, freq);
+			}
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int scmi_dvfs_get_transition_latency(struct device *dev)
+{
+	struct perf_dom_info *dom;
+	int domain = scmi_dev_domain_id(dev);
+
+	if (domain < 0)
+		return domain;
+
+	dom = perf_info.dom_info + domain;
+	if (!dom)
+		return -EIO;
+
+	return dom->opp[dom->opp_count - 1].trans_latency_us;
+}
+
+static int scmi_dvfs_freq_set(const struct scmi_handle *handle, u32 domain,
+			      unsigned long freq)
+{
+	struct perf_dom_info *dom = perf_info.dom_info + domain;
+
+	return scmi_perf_level_set(handle, domain, freq / dom->mult_factor);
+}
+
+static int scmi_dvfs_freq_get(const struct scmi_handle *handle, u32 domain,
+			      unsigned long *freq)
+{
+	int ret;
+	u32 level;
+	struct perf_dom_info *dom = perf_info.dom_info + domain;
+
+	ret = scmi_perf_level_get(handle, domain, &level);
+	if (!ret)
+		*freq = level * dom->mult_factor;
+
+	return ret;
+}
+
+static struct scmi_perf_ops perf_ops = {
+	.limits_set = scmi_perf_limits_set,
+	.limits_get = scmi_perf_limits_get,
+	.level_set = scmi_perf_level_set,
+	.level_get = scmi_perf_level_get,
+	.limits_notify_enable = scmi_perf_limits_notify_enable,
+	.level_notify_enable = scmi_perf_level_notify_enable,
+	.device_domain_id = scmi_dev_domain_id,
+	.get_transition_latency = scmi_dvfs_get_transition_latency,
+	.add_opps_to_device = scmi_dvfs_add_opps_to_device,
+	.freq_set = scmi_dvfs_freq_set,
+	.freq_get = scmi_dvfs_freq_get,
+};
+
+int scmi_perf_protocol_init(struct scmi_handle *handle)
+{
+	int domain;
+	u32 version;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_PERF, &version);
+
+	dev_dbg(handle->dev, "Performance Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	scmi_perf_attributes_get(handle, &perf_info);
+
+	perf_info.dom_info = devm_kcalloc(handle->dev, perf_info.num_domains,
+					     sizeof(struct perf_dom_info),
+					     GFP_KERNEL);
+	if (!perf_info.dom_info)
+		return -ENOMEM;
+
+	for (domain = 0; domain < perf_info.num_domains; domain++) {
+		struct perf_dom_info *dom = perf_info.dom_info + domain;
+
+		scmi_perf_domain_attributes_get(handle, domain, dom);
+		scmi_perf_describe_levels_get(handle, domain, dom);
+	}
+
+	handle->perf_ops = &perf_ops;
+
+	return 0;
+}
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 3ef2d48f03c2..c9f97e69444a 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -43,15 +43,46 @@  struct scmi_revision_info {
 	char sub_vendor_id[SCMI_MAX_STR_SIZE];
 };
 
+struct scmi_handle;
+
+/**
+ * struct scmi_perf_ops - represents the various operations provided
+ *	by SCMI Performance Protocol
+ *
+ * @limits_set: sets limits on the performance level of a domain
+ * @limits_get: gets limits on the performance level of a domain
+ * @level_set: sets the performance level of a domain
+ * @level_get: gets the performance level of a domain
+ * @limits_notify_enable: requests notifications from the platform for changes
+ *	in the allowed maximum and minimum performance levels
+ * @level_notify_enable: requests notifications from the platform when the
+ *	performance level for a domain changes in value
+ */
+struct scmi_perf_ops {
+	int (*limits_set)(const struct scmi_handle *, u32, u32, u32);
+	int (*limits_get)(const struct scmi_handle *, u32, u32 *, u32 *);
+	int (*level_set)(const struct scmi_handle *, u32, u32);
+	int (*level_get)(const struct scmi_handle *, u32, u32 *);
+	int (*limits_notify_enable)(const struct scmi_handle *, u32, bool);
+	int (*level_notify_enable)(const struct scmi_handle *, u32, bool);
+	int (*device_domain_id)(struct device *);
+	int (*get_transition_latency)(struct device *);
+	int (*add_opps_to_device)(struct device *);
+	int (*freq_set)(const struct scmi_handle *, u32, unsigned long);
+	int (*freq_get)(const struct scmi_handle *, u32, unsigned long *);
+};
+
 /**
  * struct scmi_handle - Handle returned to ARM SCMI clients for usage.
  *
  * @dev: pointer to the SCMI device
  * @version: pointer to the structure containing SCMI version information
+ * @perf_ops: pointer to set of performance protocol operations
  */
 struct scmi_handle {
 	struct device *dev;
 	struct scmi_revision_info *version;
+	struct scmi_perf_ops *perf_ops;
 };
 
 #if IS_REACHABLE(CONFIG_ARM_SCMI_PROTOCOL)