diff mbox series

[v5,01/11] clk: at91: sama7g5: fix compilation error

Message ID 1605796707-8378-2-git-send-email-claudiu.beznea@microchip.com
State New
Headers show
Series [v5,01/11] clk: at91: sama7g5: fix compilation error | expand

Commit Message

Claudiu Beznea Nov. 19, 2020, 2:38 p.m. UTC
pmc_data_allocate() has been changed. pmc_data_free() was removed.
Adapt the code taking this into consideration. With this the programmable
clocks were also saved in sama7g5_pmc so that they could be later
referenced.

Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/clk/at91/sama7g5.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 0db2ab3eca14..a092a940baa4 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -838,7 +838,7 @@  static void __init sama7g5_pmc_setup(struct device_node *np)
 	sama7g5_pmc = pmc_data_allocate(PMC_I2S1_MUX + 1,
 					nck(sama7g5_systemck),
 					nck(sama7g5_periphck),
-					nck(sama7g5_gck));
+					nck(sama7g5_gck), 8);
 	if (!sama7g5_pmc)
 		return;
 
@@ -980,6 +980,8 @@  static void __init sama7g5_pmc_setup(struct device_node *np)
 						    sama7g5_prog_mux_table);
 		if (IS_ERR(hw))
 			goto err_free;
+
+		sama7g5_pmc->pchws[i] = hw;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(sama7g5_systemck); i++) {
@@ -1052,7 +1054,7 @@  static void __init sama7g5_pmc_setup(struct device_node *np)
 		kfree(alloc_mem);
 	}
 
-	pmc_data_free(sama7g5_pmc);
+	kfree(sama7g5_pmc);
 }
 
 /* Some clks are used for a clocksource */