diff mbox series

[1/6] dt-bindings: usb: add #phy-cells to usb-nop-xceiv

Message ID 20171109222614.5719-1-robh@kernel.org
State Accepted
Commit aa25e446ce76c37bfd75ac06598c316af94e9a26
Headers show
Series [1/6] dt-bindings: usb: add #phy-cells to usb-nop-xceiv | expand

Commit Message

Rob Herring Nov. 9, 2017, 10:26 p.m. UTC
Consumers of usb-nop-xceiv use the phy binding, but #phy-cells is missing
from the binding. This is probably because this binding predates the
common phy binding. So add #phy-cells as a required property. This should
not break any users as missing should be treated as 0 cells.

Signed-off-by: Rob Herring <robh@kernel.org>

---
I'll apply to DT tree.

 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Tony Lindgren Nov. 10, 2017, 4:25 p.m. UTC | #1
* Rob Herring <robh@kernel.org> [171109 14:28]:
> "usb-nop-xceiv" is using the phy binding, but is missing #phy-cells

> property. This is probably because the binding was the precursor to the phy

> binding.

> 

> Fixes the following warning in OMAP dts files:

> 

> Warning (phys_property): Missing property '#phy-cells' in node ...

> 

> Signed-off-by: Rob Herring <robh@kernel.org>

> Cc: "BenoƮt Cousson" <bcousson@baylibre.com>

> Cc: Tony Lindgren <tony@atomide.com>

> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>

> Cc: Javier Martinez Canillas <javier@dowhile0.org>

> Cc: linux-omap@vger.kernel.org

> ---

> Please apply to TI tree.


Thanks applying into omap-for-v4.15/fixes-dt.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index 5be01c859b7a..4dc6a8ee3071 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -2,6 +2,7 @@  USB NOP PHY
 
 Required properties:
 - compatible: should be usb-nop-xceiv
+- #phy-cells: Must be 0
 
 Optional properties:
 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
@@ -33,6 +34,7 @@  Example:
 		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		vbus-regulator = <&vbus_regulator>;
+		#phy-cells = <0>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator