diff mbox series

[v3,2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC

Message ID 20190510184525.13568-3-manivannan.sadhasivam@linaro.org
State New
Headers show
Series [v3,1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller | expand

Commit Message

Manivannan Sadhasivam May 10, 2019, 6:45 p.m. UTC 
Add reset controller support for Bitmain BM1880 SoC. This commit also
adds reset support to UART peripherals.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

---
 arch/arm64/boot/dts/bitmain/bm1880.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index fdfdc65d29ef..3ab039029bf2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -5,6 +5,7 @@ 
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
 
 / {
 	compatible = "bitmain,bm1880";
@@ -92,6 +93,12 @@ 
 				compatible = "bitmain,bm1880-pinctrl";
 				reg = <0x50 0x4B0>;
 			};
+
+			rst: reset-controller@c00 {
+				compatible = "bitmain,bm1880-reset";
+				reg = <0xc00 0x8>;
+				#reset-cells = <1>;
+			};
 		};
 
 		uart0: serial@58018000 {
@@ -100,6 +107,7 @@ 
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_CLK>;
 			status = "disabled";
 		};
 
@@ -109,6 +117,7 @@ 
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_ACLK>;
 			status = "disabled";
 		};
 
@@ -118,6 +127,7 @@ 
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_CLK>;
 			status = "disabled";
 		};
 
@@ -127,6 +137,7 @@ 
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_ACLK>;
 			status = "disabled";
 		};
 	};