diff mbox series

[v2,1/5] dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type

Message ID 20200227222837.7329-2-s-anna@ti.com
State Superseded
Headers show
Series [v2,1/5] dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type | expand

Commit Message

Suman Anna Feb. 27, 2020, 10:28 p.m. UTC
From: Roger Quadros <rogerq@ti.com>

The PRUSS module has a SYSCFG which is unique. The SYSCFG
has two additional unique fields called STANDBY_INIT and
SUB_MWAIT in addition to regular IDLE_MODE and STANDBY_MODE
fields. Add the bindings for this new sysc type.

Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
v2: No changes

 Documentation/devicetree/bindings/bus/ti-sysc.txt | 1 +
 include/dt-bindings/bus/ti-sysc.h                 | 4 ++++
 2 files changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index 233eb8294204..c984143d08d2 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -38,6 +38,7 @@  Required standard properties:
 		"ti,sysc-dra7-mcasp"
 		"ti,sysc-usb-host-fs"
 		"ti,sysc-dra7-mcan"
+		"ti,sysc-pruss"
 
 - reg		shall have register areas implemented for the interconnect
 		target module in question such as revision, sysc and syss
diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h
index babd08a1d226..76b07826ed05 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -18,6 +18,10 @@ 
 
 #define SYSC_DRA7_MCAN_ENAWAKEUP	(1 << 4)
 
+/* PRUSS sysc found on AM33xx/AM43xx/AM57xx */
+#define SYSC_PRUSS_SUB_MWAIT		(1 << 5)
+#define SYSC_PRUSS_STANDBY_INIT		(1 << 4)
+
 /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
 #define SYSC_IDLE_FORCE			0
 #define SYSC_IDLE_NO			1