diff mbox series

[v3,4/6] dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs

Message ID 20200612224914.7634-5-s-anna@ti.com
State Accepted
Commit 2a2180206ab62b42c6a7fd3d77c47c3675cbc893
Headers show
Series TI K3 DSP remoteproc driver for C66x DSPs | expand

Commit Message

Suman Anna June 12, 2020, 10:49 p.m. UTC 
Some Texas Instruments K3 family of SoCs have one of more Digital Signal
Processor (DSP) subsystems that are comprised of either a TMS320C66x
CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.
Add the device tree bindings document for the C66x DSP devices on these
SoCs. The added example illustrates the DT nodes for the first C66x DSP
device present on the K3 J721E family of SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>

---
v3:
 - Refactored the common ti-sci properties "ti,sci", "ti,sci-dev-id" and
   "ti,sci-proc-ids" into a separate binding ti,k3-sci-proc.yaml.
 - Dropped the general description and maxItems against reg and reg-names
 - Added items list under reg
 - Removed the other binding references from the description for resets
   and mboxes
 - Revised the memory-region description and listed the mandatory items
 - Updated example to drop reserved-memory nodes, unused node labels
v2: https://patchwork.kernel.org/patch/11561781/

 .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  | 139 ++++++++++++++++++
 1 file changed, 139 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

-- 
2.26.0

Comments

Suman Anna June 24, 2020, 9:08 p.m. UTC | #1 
Hi Rob,

On 6/12/20 5:49 PM, Suman Anna wrote:
> Some Texas Instruments K3 family of SoCs have one of more Digital Signal

> Processor (DSP) subsystems that are comprised of either a TMS320C66x

> CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.

> Add the device tree bindings document for the C66x DSP devices on these

> SoCs. The added example illustrates the DT nodes for the first C66x DSP

> device present on the K3 J721E family of SoCs.

> 

> Signed-off-by: Suman Anna <s-anna@ti.com>

> ---

> v3:

>   - Refactored the common ti-sci properties "ti,sci", "ti,sci-dev-id" and

>     "ti,sci-proc-ids" into a separate binding ti,k3-sci-proc.yaml.

>   - Dropped the general description and maxItems against reg and reg-names

>   - Added items list under reg

>   - Removed the other binding references from the description for resets

>     and mboxes

>   - Revised the memory-region description and listed the mandatory items

>   - Updated example to drop reserved-memory nodes, unused node labels


Thanks for acking the corresponding C71x binding update [1] that is on 
top of this patch.

Can you provide your Ack for this updated patch and the refactored 
ti,k3-sci-proc.yaml binding if you don't have any comments?

regards
Suman

[1] https://patchwork.kernel.org/comment/23421509/


> v2: https://patchwork.kernel.org/patch/11561781/

> 

>   .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  | 139 ++++++++++++++++++

>   1 file changed, 139 insertions(+)

>   create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

> 

> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

> new file mode 100644

> index 000000000000..f03e88c42a6e

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

> @@ -0,0 +1,139 @@

> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: TI K3 DSP devices

> +

> +maintainers:

> +  - Suman Anna <s-anna@ti.com>

> +

> +description: |

> +  The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems

> +  that are used to offload some of the processor-intensive tasks or algorithms,

> +  for achieving various system level goals.

> +

> +  These processor sub-systems usually contain additional sub-modules like

> +  L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory

> +  controller, a dedicated local power/sleep controller etc. The DSP processor

> +  cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a

> +  TMS320C71x CorePac processor.

> +

> +  Each DSP Core sub-system is represented as a single DT node. Each node has a

> +  number of required or optional properties that enable the OS running on the

> +  host processor (Arm CorePac) to perform the device management of the remote

> +  processor and to communicate with the remote processor.

> +

> +allOf:

> +  - $ref: "ti,k3-sci-proc.yaml#"

> +

> +properties:

> +  compatible:

> +    const: ti,j721e-c66-dsp

> +    description:

> +      Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs

> +

> +  reg:

> +    items:

> +      - description: Address and Size of the L2 SRAM internal memory region

> +      - description: Address and Size of the L1 PRAM internal memory region

> +      - description: Address and Size of the L1 DRAM internal memory region

> +

> +  reg-names:

> +    items:

> +      - const: l2sram

> +      - const: l1pram

> +      - const: l1dram

> +

> +  resets:

> +    description: |

> +      Should contain the phandle to the reset controller node managing the

> +      local resets for this device, and a reset specifier.

> +    maxItems: 1

> +

> +  firmware-name:

> +    description: |

> +      Should contain the name of the default firmware image

> +      file located on the firmware search path

> +

> +  mboxes:

> +    description: |

> +      OMAP Mailbox specifier denoting the sub-mailbox, to be used for

> +      communication with the remote processor. This property should match

> +      with the sub-mailbox node used in the firmware image.

> +    maxItems: 1

> +

> +  memory-region:

> +    minItems: 2

> +    maxItems: 8

> +    description: |

> +      phandle to the reserved memory nodes to be associated with the remoteproc

> +      device. There should be at least two reserved memory nodes defined. The

> +      reserved memory nodes should be carveout nodes, and should be defined as

> +      per the bindings in

> +      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt

> +    items:

> +      - description: region used for dynamic DMA allocations like vrings and

> +                     vring buffers

> +      - description: region reserved for firmware image sections

> +    additionalItems: true

> +

> +# Optional properties:

> +# --------------------

> +

> +  sram:

> +    $ref: /schemas/types.yaml#/definitions/phandle-array

> +    minItems: 1

> +    maxItems: 4

> +    description: |

> +      phandles to one or more reserved on-chip SRAM regions. The regions

> +      should be defined as child nodes of the respective SRAM node, and

> +      should be defined as per the generic bindings in,

> +      Documentation/devicetree/bindings/sram/sram.yaml

> +

> +required:

> + - compatible

> + - reg

> + - reg-names

> + - resets

> + - firmware-name

> + - mboxes

> + - memory-region

> +

> +unevaluatedProperties: false

> +

> +examples:

> +  - |

> +    / {

> +        model = "Texas Instruments K3 J721E SoC";

> +        compatible = "ti,j721e";

> +        #address-cells = <2>;

> +        #size-cells = <2>;

> +

> +        bus@100000 {

> +            compatible = "simple-bus";

> +            #address-cells = <2>;

> +            #size-cells = <2>;

> +            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */

> +                     <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */

> +                     <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */

> +

> +            /* J721E C66_0 DSP node */

> +            dsp@4d80800000 {

> +                compatible = "ti,j721e-c66-dsp";

> +                reg = <0x4d 0x80800000 0x00 0x00048000>,

> +                      <0x4d 0x80e00000 0x00 0x00008000>,

> +                      <0x4d 0x80f00000 0x00 0x00008000>;

> +                reg-names = "l2sram", "l1pram", "l1dram";

> +                ti,sci = <&dmsc>;

> +                ti,sci-dev-id = <142>;

> +                ti,sci-proc-ids = <0x03 0xFF>;

> +                resets = <&k3_reset 142 1>;

> +                firmware-name = "j7-c66_0-fw";

> +                memory-region = <&c66_0_dma_memory_region>,

> +                                <&c66_0_memory_region>;

> +                mboxes = <&mailbox0_cluster3 &mbox_c66_0>;

> +            };

> +        };

> +    };

>
Rob Herring July 13, 2020, 6:30 p.m. UTC | #2 
On Fri, 12 Jun 2020 17:49:12 -0500, Suman Anna wrote:
> Some Texas Instruments K3 family of SoCs have one of more Digital Signal

> Processor (DSP) subsystems that are comprised of either a TMS320C66x

> CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.

> Add the device tree bindings document for the C66x DSP devices on these

> SoCs. The added example illustrates the DT nodes for the first C66x DSP

> device present on the K3 J721E family of SoCs.

> 

> Signed-off-by: Suman Anna <s-anna@ti.com>

> ---

> v3:

>  - Refactored the common ti-sci properties "ti,sci", "ti,sci-dev-id" and

>    "ti,sci-proc-ids" into a separate binding ti,k3-sci-proc.yaml.

>  - Dropped the general description and maxItems against reg and reg-names

>  - Added items list under reg

>  - Removed the other binding references from the description for resets

>    and mboxes

>  - Revised the memory-region description and listed the mandatory items

>  - Updated example to drop reserved-memory nodes, unused node labels

> v2: https://patchwork.kernel.org/patch/11561781/

> 

>  .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  | 139 ++++++++++++++++++

>  1 file changed, 139 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

> 


Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
new file mode 100644
index 000000000000..f03e88c42a6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -0,0 +1,139 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 DSP devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
+  that are used to offload some of the processor-intensive tasks or algorithms,
+  for achieving various system level goals.
+
+  These processor sub-systems usually contain additional sub-modules like
+  L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+  controller, a dedicated local power/sleep controller etc. The DSP processor
+  cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
+  TMS320C71x CorePac processor.
+
+  Each DSP Core sub-system is represented as a single DT node. Each node has a
+  number of required or optional properties that enable the OS running on the
+  host processor (Arm CorePac) to perform the device management of the remote
+  processor and to communicate with the remote processor.
+
+allOf:
+  - $ref: "ti,k3-sci-proc.yaml#"
+
+properties:
+  compatible:
+    const: ti,j721e-c66-dsp
+    description:
+      Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
+
+  reg:
+    items:
+      - description: Address and Size of the L2 SRAM internal memory region
+      - description: Address and Size of the L1 PRAM internal memory region
+      - description: Address and Size of the L1 DRAM internal memory region
+
+  reg-names:
+    items:
+      - const: l2sram
+      - const: l1pram
+      - const: l1dram
+
+  resets:
+    description: |
+      Should contain the phandle to the reset controller node managing the
+      local resets for this device, and a reset specifier.
+    maxItems: 1
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  mboxes:
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. This property should match
+      with the sub-mailbox node used in the firmware image.
+    maxItems: 1
+
+  memory-region:
+    minItems: 2
+    maxItems: 8
+    description: |
+      phandle to the reserved memory nodes to be associated with the remoteproc
+      device. There should be at least two reserved memory nodes defined. The
+      reserved memory nodes should be carveout nodes, and should be defined as
+      per the bindings in
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+    items:
+      - description: region used for dynamic DMA allocations like vrings and
+                     vring buffers
+      - description: region reserved for firmware image sections
+    additionalItems: true
+
+# Optional properties:
+# --------------------
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description: |
+      phandles to one or more reserved on-chip SRAM regions. The regions
+      should be defined as child nodes of the respective SRAM node, and
+      should be defined as per the generic bindings in,
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - resets
+ - firmware-name
+ - mboxes
+ - memory-region
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    / {
+        model = "Texas Instruments K3 J721E SoC";
+        compatible = "ti,j721e";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+                     <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
+
+            /* J721E C66_0 DSP node */
+            dsp@4d80800000 {
+                compatible = "ti,j721e-c66-dsp";
+                reg = <0x4d 0x80800000 0x00 0x00048000>,
+                      <0x4d 0x80e00000 0x00 0x00008000>,
+                      <0x4d 0x80f00000 0x00 0x00008000>;
+                reg-names = "l2sram", "l1pram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <142>;
+                ti,sci-proc-ids = <0x03 0xFF>;
+                resets = <&k3_reset 142 1>;
+                firmware-name = "j7-c66_0-fw";
+                memory-region = <&c66_0_dma_memory_region>,
+                                <&c66_0_memory_region>;
+                mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+            };
+        };
+    };