diff mbox series

[04/10] ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin

Message ID 20210125184736.1226435-4-l.stach@pengutronix.de
State Accepted
Commit 07aa5cf3af823ab2e7ce90cf147845363a35675c
Headers show
Series [01/10] ARM: dts: imx6: rdu2: enable WDOG1 | expand

Commit Message

Lucas Stach Jan. 25, 2021, 6:47 p.m. UTC 
The ALERT signaling happens on the falling edge of the signal, as rising
edge doesn't really have any notion, as it may happen much later (due to
shared IRQ line) or too early if the chip resolves the fault itself. So
only trigger the IRQ on the edge we are actually interested in.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index ba26e1b8c474..dcc97a84c88d 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -628,7 +628,7 @@ 
 		pinctrl-0 = <&pinctrl_ucs1002_pins>;
 		reg = <0x32>;
 		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
-				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+		                      <&gpio3 21 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "a_det", "alert";
 	};