diff mbox series

[2/2] arm64: boot: dts: qcom: sm8150: Add DMA nodes

Message ID 20210416133133.2067467-3-balbi@kernel.org
State New
Headers show
Series arm64: sm8150: Add minimal DMA support | expand

Commit Message

Felipe Balbi April 16, 2021, 1:31 p.m. UTC
From: Felipe Balbi <felipe.balbi@microsoft.com>

With this patch, DMA has a chance of probing and doing something
useful.

Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 72 ++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

Comments

Felipe Balbi April 17, 2021, 6:20 a.m. UTC | #1
Hi,

(looks like your email client is still refusing to break lines at 80 columns)

Konrad Dybcio <konrad.dybcio@somainline.org> writes:

>>one little note. This was for a quick test. I can either remove, keep it
>>or complete with the rest of the SPIs in this same patch. Let me know
>
>>what y'all prefer :-)
>
>
> Yeah, please remove it from this one and send in a separate patch, preferably
> adding dmas to all the QUPs :)

done

> Aaand since I already asked you to re-send, you might as well fix up the
> properties order under the nodes (compatible first, then reg, with #dma-cells
> somewhere at the bottom) and the unit name (should be "dma-controller@...").

done and done :-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index c563f381a138..b426e935a36b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4,6 +4,7 @@ 
  * Copyright (c) 2019, Linaro Limited
  */
 
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -577,6 +578,29 @@  gcc: clock-controller@100000 {
 				 <&sleep_clk>;
 		};
 
+		gpi_dma0: qcom,gpi-dma@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sm8150-gpi-dma";
+			reg = <0 0x800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x00d6 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -612,6 +636,8 @@  spi0: spi@880000 {
 				pinctrl-0 = <&qup_spi0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <50000000>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -814,6 +840,29 @@  spi7: spi@89c000 {
 			};
 		};
 
+		gpi_dma1: qcom,gpi-dma@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sm8150-gpi-dma";
+			reg = <0 0xa00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0616 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -1004,6 +1053,29 @@  spi16: spi@a94000 {
 			};
 		};
 
+		gpi_dma2: qcom,gpi-dma@c00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sm8150-gpi-dma";
+			reg = <0 0xc00000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x07b6 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_2: geniqup@cc0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00cc0000 0x0 0x6000>;