diff mbox series

[2/4] arm64: dts: broadcom: normalize the node name of the UART devices

Message ID 20210519141914.8044-3-thunder.leizhen@huawei.com
State New
Headers show
Series Clear some dtbs_check warnings detected by snps-dw-apb-uart.yaml | expand

Commit Message

Leizhen (ThunderTown) May 19, 2021, 2:19 p.m. UTC
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

---
 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
2.21.1

Comments

Florian Fainelli May 20, 2021, 6:45 p.m. UTC | #1
On Wed, 19 May 2021 22:19:12 +0800, Zhen Lei <thunder.leizhen@huawei.com> wrote:
> Change the node name of the UART devices to match

> "^serial(@[0-9a-f,]+)*$".

> 

> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

> ---


Applied to devicetree-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2ffb2c92182a..7b04dfe67bef 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -470,7 +470,7 @@ 
 			status = "disabled";
 		};
 
-		uart0: uart@100000 {
+		uart0: serial@100000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00100000 0x1000>;
@@ -481,7 +481,7 @@ 
 			status = "disabled";
 		};
 
-		uart1: uart@110000 {
+		uart1: serial@110000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00110000 0x1000>;
@@ -492,7 +492,7 @@ 
 			status = "disabled";
 		};
 
-		uart2: uart@120000 {
+		uart2: serial@120000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00120000 0x1000>;
@@ -503,7 +503,7 @@ 
 			status = "disabled";
 		};
 
-		uart3: uart@130000 {
+		uart3: serial@130000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00130000 0x1000>;